• Earthquakes and Structures
• /
• 제13권4호
• /
• pp.421-427
• /
• 2017

Seismic safety evaluation of weir structure is significant considering the catastrophic economical consequence of operational disruption. In recent years, the seismic probabilistic risk assessment (SPRA) has been issued as a key area of research for the hydraulic system to mitigate and manage the risk. The aim of this paper is to assess the seismic probabilistic risk of weir structures employing the seismic hazard and the structural fragility in Korea. At the first stage, probabilistic seismic hazard analysis (PSHA) approach is performed to extract the hazard curve at the weir site using the seismic and geological data. Thereafter, the seismic fragility that defines the probability of structural collapse is evaluated by using the incremental dynamic analysis (IDA) method in accordance with the four different design limit states as failure identification criteria. Consequently, by combining the seismic hazard and fragility results, the seismic risk curves are developed that contain helpful information for risk management of hydraulic structures. The tensile stress of the mass concrete is found to be more vulnerable than other design criteria. The hazard deaggregation illustrates that moderate size and far source earthquakes are the most likely scenario for the site. In addition, the annual loss curves for two different hazard source models corresponding to design limit states are extracted.

• 지질공학
• /
• 제17권3호
• /
• pp.411-418
• /
• 2007

산사태가 일어날 지점을 예측한다든지 사태물질로 인한 피해 예상지역을 알아내는 것은 쉬운 일이 아니다. 이는 산사태를 발생시키는 요인들이 여러가지가 있고 개개의 요인들이 산사태를 발생시키는데 기여하는 중요도도 서로 다르기 때문이다. 그러나 많은 산사태자료에 대한 분석을 바탕으로 발생 메커니즘 규명과 통계적 해석기법을 통해 산사태 발생가능성의 예측과 위험지역의 분류가 가능해졌다. 석조문화재가 산사면 또는 그 직하부에 인접해 있는 경우는 산사태가 발생되면 재해에 무방비로 노출되어 있다. 이 연구에서는 여름철의 집중호우 등에 의해 석조문화재 및 그 주변지역에 산사태가 발생할 가능성을 사전에 예측함으로써 그로 인한 석조문화재의 피해가능성을 분석하고자 하였다. 이러한 목적을 위해 2002년 8월 산사태재해로 인해 피해가 발생된 바 있으며 중요 석조문화재가 위치해 있는 실상사 백장암지역을 연구대상지역으로 선정하여 산사태 예측도를 작성하였다. 그리고 산사태재해 가능성을 발생확률로 표현하여 등급별로 구분함으로써 석조문화재 및 그 주변지역이 산사태에 취약한지의 여부를 평가하였다. 또한, 이러한 조사 및 해석기법을 앞으로 석조문화재 주변의 산사태재해 예측 및 평가를 위해 실용적으로 활용할 수 있는 토대를 마련하였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제28권4호
• /
• pp.31-39
• /
• 2022

The purpose of this study is to analyse the hazard risk by examining the magnitude and severity of each type of hazard in order to mitigate and prepare for disasters in medical facilities. Methods: The hazard risk analysis for hazard types was surveyed for team leaders of medical facilities. The questionnaire analyzed data from 27 facilities, which were returned from 41 Local Medical Centers. Results: When looking at the 'Risk' by category type of hazard, the influence of health safety and fire/energy safety comes first, followed by natural disaster, facility safety, and crime safety. On the other hand, as for 'Magnitude', facility safety and crime safety come first, followed by health safety, fire/energy safety, and natural disasters. Most of the top types of disaster judged to have high hazard in medical facilities are health types. The top five priorities of hazard in medical facilities, they are affected by the geographical and industrial conditions of the treatment area. In the case of cities, the hazard was found to be high in the order of infectious disease, patient surge, and wind and flood damage. On the other hand, in rural areas, livestock diseases and infectious diseases showed the highest hazard. In the case of forest areas, the hazard was high in the order of wildfire, fire accident, lightning, tide, earthquake, and landslide, whereas in coastal areas of industrial complexes, the hazard was high due to fire, landslide, water pollution, marine pollution, and chemical spill accident. Implications: Through the research, standards will be established for the design of hospitals with disaster preparedness, and will contribute to the preparation of preemptive measures in terms of maintenance.

• 자원환경지질
• /
• 제33권6호
• /
• pp.557-563
• /
• 2000

Subsidence hazard has never been considered seriously until recent yews in Korea, although its socioeconomic impact on Korea becomes more and more enormous. There have been a few studies for the application of GIS analysis technique to the prediction of subsidence hazard. For GIS analysis, several factors, which are represented by coverage, are considered and selected for building a GIS model. Numerical method was used to quantify the importance of each factor in GIS model and the result from numerical modeling using FLAC was compared with that from previous research based on empirical methods. Analysis in 3-D needs more computer resources (i.e. memory). Therefore that in 2.5-D was considered to overcome the problem. Not only maximum vertical subsidence but also maximum horizontal strain and maximum slope have been considered for the assessment of subsidence hazard. The model can be easily modified for the purpose of applications in any subsidence area, especially cavern or abandoned mines under thick soil layer.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2009년도 춘계학술대회 논문집
• /
• pp.237-241
• /
• 2009

Yangyang Gangwon-do has begun the clearing of upland forested areas for development. This process has caused great damage from natural hazards such as landslides and flooding for many years. Moreover, proper hazard prevention strategies have not Yet been prepared. To provide useful information for developing hazard prevention strategies this study attempted to detect areas vulnerable to flooding in Yangyang using data such as topology, meteorology, history, land use, soil, hydrology, and society. It was found that roughly 30% of the study area was vulnerable to flooding. Also it was discovered that where the vulnerability index was high, there was increased amounts of flooding. The most vulnerable areas were where forests were cut and near livers. In addition, areas where frequent hazard events were reported had a high index of vulnerability. The results of this study will provide useful information in developing hazard prevention strategies.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.27-30
• /
• 2003

The recent technology developments introduce new difficulties into the test process by the increased complexity of the chip. Most widely used method for testing high complexity and embedded systems is built-in self-test(BIST). In this paper, we describe 5-stage pipeline system as circuit under testing(CUT) and proposed a BIST scheme for the hazard detection unit of the pipeline system. The proposed BIST scheme can generate sequential instruction sets by pseudo-random pattern generator that can detect all hazard issues and compare the expected hazard signals with those of the pipelined system. Although BIST schemes require additional area in the system, it proves to provide a low-cost test solution and significantly reduce the test time.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1440-1445
• /
• 2008

There are 21 abondoned coal mines drained out mine water in gyeong sang do. We monitored the water quality of 31 mine drainage from 1995. The most of mine drainage was neutral as the average pH was 6.22 and Fe, Mn, Al concentration was below 10mg/L. The result showed the tendency of decreasing of flow and metal concentration. The highest Mn concentration was detected in bonghwa area and the hightest Fe concentration was detected in munkyung area. It means that the water quality is closly related to geological features.

• 한국지진공학회논문집
• /
• 제27권3호
• /
• pp.157-162
• /
• 2023

As a result of active geological investigation of faults in Korea, many Quaternary faults have been identified and some of them were judged to have potential to generate earthquakes. Those faults need to be considered as additional seismic sources in the seismic hazard analysis. When a fault is introduced as a new source, the earthquakes generated by the fault should be removed from the area sources that include any part of the fault, to avoid double counting. In practice, however, double counting cannot completely be avoided as the complete separation of the fault-generated earthquakes from the area sources is impossible due to uncertainties related to the earthquake location, subsurface structures of faults, etc. When a new fault source is introduced, the only constraint is the invariance of earthquake frequency. The maximum earthquake and the Richter-b value should also be subject to change, but there are no competent approaches to estimate the change due to incomplete separation of earthquakes. To gain insight into the effect of a new fault source, an example calculation of the seismic hazard were carried out. The example calculation shows that addition of a new fault source centers seismic hazard around the fault source.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.227-231
• /
• 2015

The focus of this study is on the accuracy in quantity estimates made by BIM for materials needed during construction. BIM-Revit Architecture 2014 is utilized to establish the information for an actual case to conduct estimates for the amount of reinforced concrete and formwork needed. The actual case is with a total construction area of 5,438 square meters and a total floor area of 31,623 square meters. The building commenced in December 2012 and the major structure has been completed in 2014. It is a RC structure with 4 stories underground, 12 stories above and 3 roof floors. The result shows that both of the quantity estimates of reinforced concrete and formwork are higher than that of actual use in the case. The estimate of reinforced concrete is higher than that of actual use by 2.18%, while the estimate of formwork is higher than that of the actual use by 13.04%. The results indicate that the estimate of reinforced concrete made by BIM has high accuracy, but the accuracy of the formwork estimate still needs improvement.

• 한국지리정보학회지
• /
• 제9권2호
• /
• pp.54-66
• /
• 2006

2005년 5월 산림청에서 전국 산지를 대상으로 산사태 위험지도를 제작하였다. 본 연구는 산사태 위험지도의 정확성 검증을 위하여 2005년 8월 2~3일 전북지역에서 발생된 산사태 지역을 대상으로 부경대학교 위성정보과학과 PE&RS Lab에서 개발한 PKNU 3호 시스템으로 촬영한 영상을 이용하여 산사태 발생 지역을 추출한 후 산사태 위험지도와 중첩해서 산사태 위험지도의 정확도를 검증하였다. 또한 ArcView 3.3의 산지 지형 분석과 하계망 분석을 통해 산사태 발생 지역의 고도, 경사도, 경사방향, 하천장, 유역면적에 대한 특성을 분석하였다. 그 결과 산사태 위험지도의 등급별 단위 %량의 조정이 필요하며 산사태 위험지도 작성에 기본이 되는 산사태 위험 판정표에 대한 수정 보완이 필요하다고 사료된다.