• 한국환경과학회지
• /
• 제24권2호
• /
• pp.197-205
• /
• 2015

This study was performed to identify the effect of fertilizer application and planting method on growth and yield of 'Seolhyang' strawberry during seedling raising. According to the concentration of fertilizer applied, the height of daughter plants was the highest at an EC of $0.8dS{\cdot}m^{-1}$. Leaf number and crown diameter were greatest at an EC of $0.6-0.8dS{\cdot}m^{-1}$. In the first measurement, root number was highest in non-fertilizer application, while root weight was heaviest in non-fertilizer application and EC $0.4dS{\cdot}m^{-1}$. The higher the concentration of fertilizer applied as culture media, the lower the growth rate. Thirty days after planting on the main field, plant height and number of new leaf were highest at an EC of $0.8dS{\cdot}m^{-1}$. However, no significant difference was found in leaf length and width and chlorophyll content according to fertilizer application. Marketable yield of 25 g or higher was greatest in EC $0.6dS{\cdot}m^{-1}$. In contrast, no significance was found in total marketable yield at an EC of $0.4-0.8dS{\cdot}m^{-1}$. Aconsistent pattern was exhibited in the growth of 1-5 harvesting flower clusters according to planting method. The length of leaf and flower cluster was short and chlorophyll content was low, when bed soil was removed 100% in harvesting of the first flower cluster. In all treatment, leaf length was shortened until harvesting of the second and third flower cluster, but rapidly lengthened in harvesting of the third and fourth flower clusters. Moreover, the length of flower cluster had a increasing tendency from harvesting of the third flower cluster. However, chlorophyll content was reduced continuously until harvesting of the fifth flower cluster, and was lowest in harvesting of the fourth flower cluster without removal of bed soil. Total yield was greatest in treatment of crown removal in bed soil between November and May. Late marketable yield between March and May was highest in treatment of 100% bed soil removal, followed by treatment of crown removal. Marketable yield of 25 g or higher was greatest in treatment of crown removal between December and February, while greatest in treatment of 100% bed soil removal between March and May.

• 전력전자학회논문지
• /
• 제10권3호
• /
• pp.274-281
• /
• 2005

압전소자를 에너지원으로 사용하여 자립형 전기전자시스템에 에너지를 공급하는 에너지 획득(Harvesting) 개념의 구현을 위하여, 새로운 AC/DC 공진형 펄스 컨버터를 제안한다. 컨버터는 정류기와 DC 컨버터의 2단계로 구성되었으며, AC/DC 변환을 위한 정류기는 MOSFET의 3상한 동작 특성을 이용하여 구현하고, N형 및 P형 MOSFETs을 사용하여 DC/DC 부스트 컨버터를 구현하였다. 제안된 컨버터 시스템의 동작원리 및 동작모드를 스위칭 소자의 기생캐패시턴스를 고려하여 해석하고, 시뮬레이션을 통하여 해석결과를 검증하였다. CMOS IC 칩으로 제작된 본 시스템의 실험 결과는 수십 uW 용량에서 에너지 획득 개념의 구현 가능성을 제시하였다.

• Journal of Forest and Environmental Science
• /
• 제33권2호
• /
• pp.147-153
• /
• 2017

The purpose of this study was to examine productivity and cost of tree-length harvesting using cable yarding system in a larch (Larix leptolepis) clear-cutting stand located in Pyeongchang-gun, Gangwon-do. We used tree-length harvesting method using cable yarding system with a tower yarder HAM300. The productivity was $17.6m^3/hr$ for felling, $12.4m^3/hr$ for delimbing, $4.2m^3/hr$ for yarding, and $8.1m^3/hr$ for processing. The total cost of the harvesting system was $48,381won/m^3$, which was majorly composed of yarding operation cost, at $40,169won/m^3$ (79.3%), while felling had the lowest cost at $1,154won/m^3$ (4.1%). Major factors affecting felling and processing productivity was tree volume and the number and thickness of branches for delimbing productivity. In addition, we suggest that training and education for machine operators were critical to improve yarding productivity.

• 전자공학회논문지
• /
• 제53권4호
• /
• pp.87-93
• /
• 2016

본 논문에서는 모바일 애드혹 무선 센서 네트워크에서 RF 에너지 하베스팅 기반 라우팅 프로토콜을 제안한다. 제안된 라우팅 프로토콜의 주요한 특징 및 기여도는 다음과 같다. 첫째, 모바일 센서 노드의 잔여에너지와 RF 에너지 하베스팅을 기반으로 한 라우팅 경로 설정. 둘째, 네트워크 및 경로의 생존시간을 증가시키기 위해서 모바일 센서 노드들의 에너지를 기반으로 한 경로의 평균 가용성과 안정성을 고려하여 경로를 설정한다. OPNET을 사용한 제안된 라우팅 프로토콜의 성능평가 결과는 RF 에너지 하베스팅을 기반으로 하여 경로의 가용성과 안정성을 고려한 라우팅 방법이 경로의 라이프타임을 효과적으로 향상 시키는 것을 확인 할 수 있음을 보여준다.

• 한국식품영양학회지
• /
• 제33권3호
• /
• pp.257-265
• /
• 2020

This study investigated the volatile flavor composition of essential oils from Solidago virga-aurea var. asiatica Nakai with different harvesting area. The essential oils obtained by the hydrodistillation extraction method from the aerial parts of the plants were analyzed by gas chromatography (GC) and GC-mass spectrometry (GC-MS). Ninety-five (91.61%) volatile flavor compounds were identified in the essential oils from the S. virga-aurea var. asiatica Nakai harvested in Koheung, Jeolanamdo. The major compounds were hexadecanoic acid (29.22%), 7-hexyl eicosane (9.12%), spathulenol (7.701%), 3,8-dimethyl decane (6.48%), caryophyllene oxide (4.52%) and α-copaene (4.23%). Fifty-seven (97.43%) volatile flavor compounds were identified in the essential oils from the S. virga-aurea var. asiatica Nakai harvested in Seoguipo, Jejudo. The major compounds were 2-carene (40.95%), α-copaene (10.77%), α-muurolene (5.81%), and spathulenol (3.11%). The chemical composition of the essential oils was significantly different in quality and quantity with the different harvesting area. The quantitative variations of hexadecanoic acid, 7-hexyl eicosane, spathulenol, 3,8-dimethyl decane, caryophyllene oxide, 2-carene, and α-copaene according to different harvesting area can serve as a quality index of the S. virga-aurea var. asiatica Nakai essential oils in food industries.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.28-34
• /
• 2015

Purpose: This study aimed to install an RTK-GPS (Real Time Kinematic-Global Positioning System) and IMU (Inertial Measurement Unit) on a tractor used in a farm to measure positions, pasture topography, posture angles, and vibration accelerations, translate the information into maps using the GIS, analyze the characteristics of grass harvesting work, and establish new technologies and construction standards for pasture infrastructure improvement based on the analyzed data. Method: Tractor's roll, pitch, and yaw angles and vibration accelerations along the three axes during grass harvesting were measured and a GIS map prepared from the data. A VRS/RTK-GPS (MS750, Trimble, USA) tractor position measuring system and an IMU (JCS-7401A, JAE, JAPAN) tractor vibration acceleration measuring systems were mounted on top of a tractor and below the operator's seat to obtain acceleration in the direction of progression, transverse acceleration, and vertical acceleration at 10Hz. In addition, information on regions with bad workability was obtained from an operator performing grass harvesting and compared with information on changes in tractor posture angles and vibration acceleration. Results: Roll and pitch angles based on the y-axis, the direction of forward movements of tractor coordinate systems, changed by at least $9-13^{\circ}$ and $8-11^{\circ}$ respectively, leading to changes in working postures in the central and northern parts of the pasture that were designated as regions with bad workability during grass harvesting. These changes were larger than those in other regions. The synthesized vectors of the vibration accelerations along the y-axis, the x-axis (transverse direction), and the z-axis (vertical direction) were higher in the central and northwestern parts of the pasture at 3.0-4.5 m/s2 compared with other regions. Conclusions: The GIS map developed using information on posture angles and vibration accelerations by position in the pasture is considered sufficiently utilizable as data for selection of construction locations for pasture infrastructure improvement.

• 한국위성정보통신학회논문지
• /
• 제11권2호
• /
• pp.55-59
• /
• 2016

기존 무선에너지 하비스팅시스템에서 유저는 하나의 Hybirid-AP (H-AP)로부터 에너지와 정보를 동시에 받았다. 하지만 무선에너지 하비스팅은 거리가 멀수록 감쇄가 심하기 때문에 H-AP에서 거리가 먼 유저들은 낮은 하비스팅 효율 가진다 (이중 근거리/원거리 문제). 이러한 문제를 해결하기 위해서 본 논문은 Power beacon (PB)을 통해 유저에게 별도의 파워를 공급하는 비결합 무선에너지 하비스팅 네트워크를 시스템 모델로 사용하였다. 이 논문의 주된 목적은 다양한 제약 조건과 Quality of service (QoS), 그리고 Quality of harvested power (QoP)를 만족하면서 목적 함수인 Energy efficiency (EE)를 최대화 하는 것이다. 제안된 시스템은 라그랑지안 쌍대 분해법 이론을 기반으로 EE 최대화를 위한 최적의 시간 스케줄링 알고리즘을 제안한다. 이 알고리즘을 통해 프레임 분해 요소, H-AP의 송신파워, 그리고 PB의 송신파워의 최적 값과 EE의 최대값을 구할 수 있다. 모의 실험 결과는 제안된 알고리즘으로 파라미터가 최적 값으로 빠르게 수렴하고 제안된 모델의 성능이 기존의 시스템 모델보다 우수하다는 것을 증명한다.

• 한국멀티미디어학회논문지
• /
• 제15권11호
• /
• pp.1273-1283
• /
• 2012

본 논문에서는 참외 수확로봇을 위한 비전 기반 참외 위치인지 알고리즘을 제시하였다. 입력된 영상의 RGB값을 HSI값으로 변환 후 Hue 값을 이용하여 이진화를 수행한 후에 참외 영역을 추출하였다. 형태학적 필터링을 이용하여 잡음을 제거한 후에 경계선 검출과 convex hull 기법을 이용하여 최외각 정점을 검출하였다. RANSAC 알고리즘에 의하여 참외에 대한 타원 정합을 수행하고 참외의 중심점, 장축 및 단축의 길이, 회전각도에 대한 정보를 획득하였다. 참외 모델에 대한 다양한 시뮬레이션 실험에 의해 제안한 방법의 유효성을 검증하였고, 실제 참외에 적용시켜 제안한 방법의 타당성을 확인하였다.

• 한국의류학회지
• /
• 제32권8호
• /
• pp.1286-1298
• /
• 2008

This study was attempted to examine the indigo dyeing technique in the latter Joseon Dynasty, and to find diachronic specifics in the indigo dyeing method from 17C to 19C. The results are as follows: First, There were 2 kinds of indigo species-Yoram(Polygonum tinctorium Lour.) and Sungram(Isatis tinctoria L.)-in the latter Joseon Dynasty. Dangram was preferred in particular among Yoram species because of its high dyeing efficiency. Sungram was mainly used for making Jeon(indigo sediment). Second, Yoram cultivation took the following order: Sowing in April${\rightarrow}$planting out in June${\rightarrow}$harvesting leaves in August${\rightarrow}$collecting seeds in September. Sungram had more harvesting times and wider harvesting period than Yoram. Third, all indigo dyeing methods were grouped into two categories, one was temporary dyeing method, the other was permanent dyeing method. Mixture dyeing of the boiled and the raw, raw leaves dyeing, and fermentation dyeing belonged to the temporary dyeing. Jeon dyeing and Gaeogi dyeing belonged to the permanent dyeing. Finally, diachronic specifics from 17C to 19C were as follows: Decline in the mixture dyeing of the boiled and the raw, development in the raw leaves dyeing, continuance of the fermentation dyeing, and naturalization of Jeon dyeing technique.

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2006년도 춘계학술대회 및 제3차 한일 공동 국제 학술대회
• /
• pp.100-100
• /
• 2006