• Journal of Biosystems Engineering
• /
• v.31 no.6 s.119
• /
• pp.500-505
• /
• 2006

Jujube is one of korean most favorite fruits. Harvesting operations of the jujube farming, however, completely depend on hand labor. Especially, collecting operation requires about three times of hand labor compared with separate operation by impacting or shaking of twigs in the hand-harvesting system of jujube fruits. Consequently, jujube farmers sincerely demand the mechanization of the collecting operation of jujube fruits in the harvesting operation. A new collecting system was designed and constructed five parts-collecting pad, guide ring system, sorting system, frame with driving system, and handle with operation levers, which performed collecting operation of jujube fruits without missing fruits in five part functions, however, an extra future more deliberate study would need how to handle conveniently the collecting pad of the prototype in the narrow space of row of the jujube farm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.255-260
• /
• 2016

In this paper, a full-wave rectifier (FWR) with a simple vibration detector suitable for use with vibrational energy harvesting systems is presented. Conventional active FWRs where active diodes are used to reduce the diode voltage drop and increase the system efficiency are usually powered from the output. Output-powered FWRs exhibit relatively high efficiencies because the comparators used in active diodes are powered from the stable output voltage. Nevertheless, a major drawback is that these FWRs consume power from the output storage capacitor even when the system is not harvesting any energy. To overcome the problem, a technique using a simple vibration detector consisting of a peak detector and a level converter is proposed. The vibration detector detects whether vibrational energy exists or not in the input terminal and disables the comparators when there is no vibrational energy. The proposed FWR with the vibration detector is designed using a $0.35-{\mu}m$ CMOS process. Simulation results have verified the effectiveness of the proposed scheme. By using the proposed vibration detector, a decrease in leakage current by approximately 67,000 times can be achieved after the vibration disappears.

• Journal of Environmental Health Sciences
• /
• v.36 no.3
• /
• pp.208-214
• /
• 2010

Green tobacco sickness (GTS) is an illness associated with nicotine exposures among tobacco harvesters. The purposes of this study were to measure the concentration of nicotine residues on the hands and forearms of tobacco harvesters, and to compare the concentrations according to the harvesting task. Wipe samples from the both hands and forearms were obtained from 16 workers at three sampling times (before work, in the morning after harvesting leaves, and in the afternoon after binding leaves). The geometric means of the right and left hand nicotine levels in harvesting work were 0.70 and $0.61\;{\mu}g/cm^2$, respectively, which were substantial, if significantly lower than the corresponding levels in binding work of 5.19 and $1.50\;{\mu}g/cm^2$ (p=0.016). The overall combined nicotine levels for the hands (i.e., left and right) were significantly higher than those for the forearms (p=0.013). The results of this study therefore indicate that, for GTS prevention, waterproof gloves should be worn while harvesting.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.51-57
• /
• 2014

PURPOSES : An conventional method for electric power generation is converting thermal energy into mechanical energy then to electrical energy. Due to environmental issues such as global warming related with $CO_2$ emission etc., were the limiting factor for the energy resources which resulting in extensive research and novel technologies are required to generate electric power. Thermal energy harvesting using thermoelectric generator is one of energy harvesting technologies due to diverse advantages for new green technology. This paper presents a possibility of application of the thermoelectric generator's application in the direct exchange of waste solar energy into electrical power in road space. METHODS : To measure generated electric power of the thermoelectric generator, data logger was adopted as function of experimental factors such as using cooling sink, connection methods etc. Also, the thermoelectric generator、s behavior at low ambient temperature was investigated as measurement of output voltage vs. elapsed times. RESULTS : A few temperature difference between top an bottom of the thermoelectric generator is generated electric voltage. Components of an electrical circuit can be connected in various ways. The two simplest of these are called series and parallel and occur so open. Series shows slightly better performance in this study. An installation of cooling sink in the thermoelectric generator system was enhanced the output of power voltage. CONCLUSIONS : In this paper, a basic concepts of thermoelectric power generation is presented and applications of the thermoelectric generator to waste solar energy in road is estimated for green energy harvesting technology. The possibility of usage of thermoelectric technology for road facilities was found under the ambient thermal gradient between two surfaces of the thermoelectric module. An experiment results provide a testimony of the feasibility of the proposed environmental energy harvesting technology on the road facilities.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.4
• /
• pp.329-332
• /
• 1996

This experiment was carried out to investigate the growth characteristics and root yield with different harvesting times in Astragalus membranaceus. The growth of stem diameter. number of nodes. number of branches and dry weight of top plant were not affected in late harvesting time compare to early harvesting time. but stem height was increased by harvesting time. Otherwise root growth were effected by harvesting time in one and two years old plant. So, root length, weight of dry root and dry root yield were the most excellent until reached up to harvesting of 10th November. The content of methanol extract was not different between one and two years old plant, but that of different harvesting time was the most by harvesting time in mid November. It was suggested that the optimal harvesting time seems to be in mid November rather than in mid or late October.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.277-286
• /
• 1985

From a series of studies conducted on the local maize lines at the Agr. College of the Chungnam National Univ., a few maize lines with many tillers and ears per plant were identified and tentatively named as MET. The purpose of the study was to evaluate the MET lines, which were selfed for five generations, for silage purpose under the different plant densities. A hybrid, Suwon #19 and a synthetic variety, Puyo #3${\times}$#2, were included for comparison. Plant height at harvesting times showed no significant varietal differences. However, the MET lines were very slow in early plant growth compared to the hybrid or synthetic variety, probably due to inbreeding depression of the MET lines. Total fresh weight at the harvesting times was highest in the MET 1 line. The MET 1 line was about 2,000 kgr. per 10a. higher than the hybrid at the harvesting time. The highest fresh weight was obtained when grown under the plant density of 60 ${\times}$ 20cm. Total dry weight per unit area showed the same tendency as the fresh weight. Total dry weight of MET 1 line was about 2.4 tons per 10a., which was about 10% higher than the hybrid, Suwon #19. As the fresh weight, the total dry weight was also highest in the plant density of 60 ${\times}$ 20cm. The grain yield per 10 are of MET 1 was comparable to the grain yield of the hybrid, especially in the low plant density, 60 ${\times}$ 40cm. The average number of effective tillers of MET lines were 4.5, while the mean tiller number of the hybrid or synthetic variety were none. However, the lodging was one of the problem for growing MET lines. The 100 kernel weight of MET lines was about 9 gr., while the 100 kernel weight of the hybrid or synthetic variety was about 30 grm.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.3
• /
• pp.172-176
• /
• 1999

The saponins are considered the main effective components in Platycodon grandiflorum (Jacq.) A. DC.. In order to obtain the basic information for producing the high quality medicinal plant and processing, the crude saponin contents were analyzed with platycodi radix, the root of Platycodon grandiflorum by different cultivating years, parts, harvesting times and drying methods. The crude saponin contents were decreased by increasing cultivating years. The crude saponin contents were 2.74% in tail of root and 1.65 % in head of root, respectively. Besides, the contents of the crude saponin in cortex were 1.8 times more than that in core of root. The crude saponin contents in different harvesting times were 2.82% and 2.74% at March 10 and December 10, showing higher than that being harvested at June 10 and September 10. The crude saponin contents among drying methods were not significantly different at 5% level DMRT, but the hot air drying after steam showed the least crude saponin.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.9
• /
• pp.702-710
• /
• 2012

Eco-friendly $(Na,K)NbO_3$ (NKN)-based piezoelectric ceramic materials were fabricated by conventional ceramic method for shear mode piezoelectric energy harvesting application. $NKN-LiTaO_3$ (LT) based compositions were adopted for the high $d_{15}{\times}g_{15}$ which is proportional to harvested energy density. The composition $0.935(Na_{0.535}K_{0.485})NbO_3-0.065LiTaO_3$ was found to be lie on the boundary of tetragonal and orthorhombic phases. With reducing Ta content, the dielectric constant decreased gradually while maintaining high $d_{15}$, which resulted in increased $d_{15}{\times}g_{15}$. The composition $0.935(Na_{0.535}K_{0.485})NbO_3-0.065Li(Nb_{0.990}Ta_{0.010})O_3$ was found to possess excellent piezoelectric and electromechanical properties ($d_{15}{\times}g_{15}=29\;pm^2/N$, $d_{15}$ = 417 pC/N, $k_{15}$ = 0.55), and high curie temperature ($T_c=455^{\circ}C$).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.3
• /
• pp.153-157
• /
• 1989

This experiment was carried out to investigate the effects of the first harvesting times and regrowth periods after the fist harvest on grass regrowth, dry matter (DM) yield and botanical composition in pasture mixtures during 1987 and 1988. For the test, a split plot design with 3 replications was treated with 3 different first harvesting times (vegetative, stem elongation and heading stage) and 3 different regrowth periods (20, 30 and 40 days) after first harvest. Although the total DM yield of grasses was decreased slightly with earlier cutting, the regrowth DM yield and the regrowth plant height was increased significantly with earlier cutting (p < 0.05). Also, the 30 days of regrowth periods was contributed greatly to the regrowth and the DM yield. The percentage of legumes Tmainly red clover) in botanical composition was increased with later initial harvest anrl longer regrowth period after first harvest. Based on the results, it is suggested that good grass regrowth and seasonal distribution could be achieved by the earlier harvest at fist and the regrowth period of 30 days after first harvest in spring.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.58-63
• /
• 2008

Variation of chalkiness expression in milled waxy rice with the moisture contents of grains was investigated using instrument and naked eye evaluation methods. To find out any effects of varieties and harvesting times on the chalkiness development, rice grains of seven waxy varieties harvested at early, optimal and late times were tested after being sun-dried to have three different moisture contents of about $13.0{\sim}14.5%$, $14.5{\sim}16.0%$ and above 16.0%. The moisture contents of rice grains were distributed in the ranges of about 13.0% to 17.5% with the drying intensity right after harvesting. Although there were some genetical variations in whiteness and degree of transparency of milled rice grains among varieties at the same condition, chalkiness was most significantly affected by the changes of moisture content in all waxy varieties and harvesting times. At the moisture content less than 13.5%, all varieties exhibited waxy unique chalkiness, and at the moisture ranges between 13.5% and 14.0% the chalkiness was more or less affected by harvesting time and varieties. At the moisture content ranges between 14.0% and 16.0%, chalkiness gradually disappeared as with the increase of moisture content. However the degrees of chalkiness loses were strongly depended on individual kernels by showing as if the number of non-waxy rice kernels would be increasing in waxy rice grains with the moisture content increase. At the moisture content above about 16.0%, all waxy kernels lost their unique chalkiness, and showed non-waxy rice appearance.