• 소음진동
• /
• 제8권5호
• /
• pp.957-963
• /
• 1998

A new signal processing technique, the directional harmonic wavelet map(dHWM), is presented to characterize the instantaneous planar motion of a measurement point in a structure from its transient complex-valued vibration signal. It is proven that the directional auto-HWM essentially tracks the shape and directively of the instantaneous planar motion, whereas the phase of the directional cross-HWM indicates its inclination angle. Finally, the technique is suessfully applied to an automobile engine for characterization of its transient motion during crank-on/idling/engine-off.

• Smart Structures and Systems
• /
• 제8권3호
• /
• pp.253-274
• /
• 2011

In this paper, the harmonic displacement response of a damaged square plate with all-over part-through damage parallel to one edge is utilized as the input signal function in wavelet analysis. The method requires the properties of the damaged plate, i.e., no information about the original undamaged structure is required. The location of damage is identified by sudden changes in the spatial variation of transformed response. The incurred damage causes a change in the stiffness or mass of the plate. This causes a localized singularity which can be identified by a wavelet analysis of the displacement response. In this study via numerical examples shown by using harmonic response is more versatile and effective compared with the static deflection response, specially in the presence of noise. In the light of the obtained results, suggestions for future work are presented and discussed.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.237-240
• /
• 2007

The evaluation of shear modulus (or shear wave velocity) profile of site is very important in the various fields of geotechnical engineering. To obtain shear wave velocity profile, various in-situ seismic methods using surface waves have been developed. These surface wave based in-situ seismic methods have their own strength and weakness. In this study, new seismic site characterization method using the harmonic wavelet analysis of wave (HWAW) was proposed to overcome some of weaknesses in the existing surface wave based seismic site characterization methods. HWAW method which is based on time-frequency analysis using harmonic wavelet transform have been developed to determine phase and group velocities of waves. In order to estimate the applicability of HWAW method, field tests were performed. Through field applications and comparison with other test results, the applicability of the proposed method were verified.

• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.551-558
• /
• 2000

In this paper a systematic approach to automatic classificationi of power system harmonic disturbances is proposed where the proposed approach consists of the following three steps:(i) detecting and localizing each harmonic disturbance by applying discrete wavelet transform(DWT) (ii) extracting an efficient feature vector from each detected disturbance waveform by utilizing FFT and principal component analysis (PCA) along with Fisher's criterion and (iii) classifying the corresponding type of each harmonic disturbance by recognizing the pattern of each feature vector. To demonstrate the performance and applicability of the proposed classification procedure some simulation results obtained by analyzing 8-class power system harmonic disturbances being generated with Matlab power system blockset are also provided.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.145-147
• /
• 2003

The wavelet transform has attracted considerable attention in the field of power quality analysis recently. This paper discuss the voltage sag and harmonic disturbances by using wavelet analysis. A discrete wavelet-based approach is applied for determining the characteristics of these disturbances.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.267-272
• /
• 1998

A new signal processing technique, the directional harmonic wavelet map(dHWM), is presented to characterize the instantaneous planar motion of a measurement point in a structure from its transient complex-valued vibration signal. It is proven that the auto-dHWM essentially tracks the shape and directivity of the instantaneous planar motion, whereas the phase of the cross-dHWM indicates its inclination angle. Finally, the technique is successfully applied to an automobile engine for characterization of its transient motion during crank-on/idline/engine-off.

• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.51-59
• /
• 2004

공학적 물성치로서의 저변형율에서의 전단탄성계수의 결정은 다양한 토목분야에서 매우 중요하다. 본 논문에서는 저변형율에서의 전단탄성계수를 결정하기 위하여 개발된 HWAW(Harmonic Wavelet Analysis of Wave)방법을 이용한 지반조사기법의 실제 현장에서의 타당성을 검증하기 위하여 두 곳의 현장에 HWAW방법을 적용하였다. HWAW방법을 검증하기 위하여 동일한 현장에서 수행된 SASW시험과 PS-Suspension Logging 실험의 결과와 비교하였다. 이를 통하여 HWAW방법이 배경잡음과 지반의 횡방향 불균일성에 의한 오류를 기존 방법에 비하여 최소화 할 수 있으며, 국부적이며 정밀한 대상지반의 실제 전단파 속도 주상도를 매우 효과적으로 결정할 수 있음을 확인할 수 있었다.

• 전기학회논문지P
• /
• 제52권4호
• /
• pp.179-188
• /
• 2003

Percentage differential characteristic scheme has been recognized as the principal basis for large transformer protection. Nowadays, relaying signals can contain second harmonic component to a large extent even in a normal state, and second harmonic ratio indicates a tendency of relative reduction because of the advancement of transformer's core material. And then, conventional second harmonic restraint differential relaying exposes some doubt in reliability. It is, therefore, necessary to develop a new algorithm for the effective and accurate discrimination. This paper deals with advanced fuzzy logic based relaying by using flux differential, and a new fault detection criterion logic scheme by using wavelet transform. To comparative analysis of proposed techniques, the paper constructs power system model including power transformer, utilizing the EMTP, and collects data through simulation of various internal faults and magnetizing inrush. The proposed fuzzy relaying and a new fault detection scheme were tested. The former, fuzzy relaying, was proven to be faster and more reliable than the latter.

• Smart Structures and Systems
• /
• 제11권1호
• /
• pp.35-51
• /
• 2013

Over the last two decades Wavelet Transformation (WT) method has been widely utilized for the damage identification of structures. The main objective of this paper is to discuss and present some of common shortcomings and limitations of mathematical software, as well as other precautionary measures that need to be considered when using them for wavelet analysis applications. Due to popular usage of MATLABMATLAB(R) comparing to other mathematical tools among researchers for data processing of structural responses through WT analysis, this software was chosen for specific study. To the best of the authors' knowledge, these limitations and observations have not been previously identified or discussed in the literature. In this work, a square plate with a severe damage, in form of a crack, parallel to the left edge of the plate is selected for a pilot study. The steady state harmonic response is used for measuring the deflection shape across the line parallel to one edge and perpendicular to the damage. Several criteria and cases such as the smallest size damage that can be detected, correlation between the crack width and the number of sampling points, and the influence of the damage thickness on the accuracy of the result are investigated.

• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.37-45
• /
• 1998

본 논문에서는 웨이브렛 변환을 이용하여 EMI(Electromagnetic Interference: 전자파 장해) 신호로부터 각각 다른 주파수 성분과 시간정보를 동시에 추출하고, 시간과 주파수 영역에서 웨이브렛 변환의 수행결과를 해석할 수 있도록 하였다. Daubechies-4 필터 계수를 사용한 다중해상도 해석(multiresolution analysis)을 수행하여 EMI 신호로부터 대상 신호의 주파수 성분이 속하는 주파수 대역을 추출하고, 웨이브렛 변환 결과를 통하여 시간정보를 얻었다. 또한 웨이브렛 변환 결과를 평가하기 위해 상관해석법을 시도하고, 웨이브렛 함수에 따른 변환 결과를 비교함으로써 해석하고자 하는 신호에 가장 적합한 웨이브렛 함수를 선택하여 신호의 파형분석과 고조파 해석을 시뮬레이션으로 검증하였다. 그리고 soft thresholding 기법을 이용하여 EMI 신호에 대한 잡음제거의 효과를 입증하였다.