• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.873-879
• /
• 2007

본 논문에서는 Freescale사의 Si-LDMOSFET 4-W 소자를 이용하여 고효율 class-F 전력 증폭기를 구현하였다. Class-F 전력 증폭기를 구현하는데 있어서 모든 하모닉 성분들에 대해 원하는 임피던스를 갖도록 조정하기는 불가능하기 때문에 2차와3차 하모닉 성분만을 조율하여 회로의 간결함과 동시에 상대적으로 높은 효율을 얻을 수 있었다. 또한, 본 논문에 설계된 증폭기는 보다 정확하게 하모닉 성분을 조율하기 위해, LDMOSFET의 대신 호 등가 모델에서 가장 큰 영향을 미치는 drain-source capacitance(Cds)와 bonding inductance(Lb)를 추출하여 하모닉 조율 회로를 설계하였다 제작된 고효율 class-F 전력 증폭기의 측정 결과 drain-efficiency(DE) 65.1%, power-added-efficiency(PAE) 60.3%의 효율을 얻을 수 있었다.

• 한국전자파학회논문지
• /
• 제21권9호
• /
• pp.987-994
• /
• 2010

본 논문에서는 간단하면서도 효과적인 능동적인 로드 풀(active load-pull) 방법을 제시하고, 고조파의 임피던스 성분을 제어하는 회로를 사용하여, X-대역 전력 증폭기의 효율을 개선시킬 수 있는 방법에 관하여 연구하였다. 제안된 능동적인 로드 풀 시스템은 크게 방향성 결합기와 위상 변위기, 단락 회로, 그리고 전력 증폭기로 구성되어 있으며, 전통적인 능동적인 로드 풀 방법에 비해 반사 계수가 1인 지점까지 임피던스를 쉽게 가져다 놓을 수 있다. 본 논문에서 사용된 소자는 Mitsubishi사의 GaAs FET인 MGF1801이며, 9 GHz의 동작 주파수에서 class-A일 때, 21.65 dBm의 출력 전력과 24.9 %의 드레인 효율을 얻었고, class-AB일 때, 21.46 dBm의 출력 전력과 53.3%의 드레인 효율을 얻었다. 고조파 제어 회로는 실험에 사용된 초고주파 부품의 주파수 대역폭의 한계로 인해, 2차와 3차 항 성분까지만 고려하여 설계하였으며, class-AB에서, 6.4 %의 효율이 증가된 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.291-295
• /
• 1989

The conventional Optimized Injection Method is a good control technique but can't be applied to 3-phase a.e. line. In this paper, a new technique, Time-sharing Method based on basic principle of conventional Optimized Injection Method is introduced to hold the independence of each phase, and the structure of power circuit is improved to realize the new control method. By this scheme it is possible to simplify the control circuit and power circuit. The characteristic of the new control method are investigated and compared with conventional Optimized Injection Method by computer simulation.

• 전력전자학회논문지
• /
• 제5권5호
• /
• pp.484-492
• /
• 2000

본 논문에서는 고조파전류 보상기능을 갖는 전압 보상기에 관한 연구를 수행하고 그 보상 특성을 해석하였다. 제안된 보상시스템은 하이브리드형 능동전력필터에서와 같이 LC로 구성되어 전력선에 병렬로 연결되는 수동필터와 직렬 변압기를 사용하여 전력선에 직렬로 연결되는 PWM 컨버터를 동시에 사용하는 회로구조를 갖는다. 제안된 보상시스템을 통해 다이오드 정류기와 같은 비선형 부하로 인해 발생되는 고조파 전류의 보상 및 전원 이상 현상으로 발생되는 전원측 이상 전압의 보상을 모두 수행한다. 단상 등가회로를 통해 보상시스템의 동작 원리를 설명하고 d-q 동기좌표계 축 상에서 보상시스템의 모든 제어를 수행하는 제어 알고리즘의 개발을 수행하였으며 실험을 통해 제안된 보상시스템의 보상특성을 확인하였다.

• 대한전기학회논문지
• /
• 제36권2호
• /
• pp.80-87
• /
• 1987

This paper describes a new approach to control the two-phase servomotor driven with microprocessor based inverter. Conventional 6-step driving system has some shortcomings such as vibration and loss caused by the harmonic voltage. An attempt has been made to eliminate the harmonic content of output waveform by PWM technique and to simplify the control system by phase control method. In realizing the phase control by PWM technique proposed by this paper, control circuit and algorithm has been suggested. The proposed method has been applied to the speed control system with PI controller to confirm the adaptation of the servo system and experimental results has been compared with the computer simulation.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.695-703
• /
• 2017

In order to satisfy the urgent requirements for the overheating protection of induction motors, an approach that can be used to identify motor temperature has been proposed based on the rotor slots harmonic (RSH) in this paper. One method to accomplish this is to improve the calculation efficiency of the RSH by predicting the stator winding distribution harmonic order by analyzing the harmonics spectrum. Another approach is to increase the identification accuracy of the RSH by suppressing the influence of voltage flashes or current surges during temperature estimation based on model predictive control (MPC). First, an analytical expression of the stator inductance is extracted from a steady-state positive sequence motor equivalent circuit model developed from the rotor flux field orientation. Then a procedure that applies MPC for reducing the identification error of the rotor temperature caused by voltage sag or swell of the power system is given. Due to this work, the efficiency and accuracy of the RSH have been significantly improved and validated our experiments. This work can serves as a reference for the on-line temperature monitoring and overheating protection of an induction motor.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1661-1668
• /
• 2016

A fixed off-time controlled high power factor ac-dc LED driver is proposed in this paper, which employs a novel zero-crossing-compensation (ZCC) circuit based on a fixed off-time controlled scheme. Due to the parasitic parameters of the system, the practical waveforms have a dead region. By detecting the zero-crossing boundary, the proposed ZCC circuit compensates the control signal VCOMP within the dead region, and is invalid above this region. With further optimization of the parameters KR and Kτ of the ZCC circuit, the dead zone can be eliminated and lower THD is achieved. Finally, the chip is implemented in HHNEC 0.5μm 5V/40V HVCMOS process, and a prototype circuit, delivering 7~12W of power to several 3-W LED loads, is tested under AC input voltage ranging from 85V to 265V. The test results indicate that the average total harmonic distortion (THD) of the entire system is approximately 10%, with a minimum of 5.5%, and that the power factor is above 0.955, with a maximum of 0.999.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1166-1168
• /
• 2003

In most power electronic applications, the AC power input provided by the electronic utility needs to first converted to a DC voltage. Such conversion is accomplished by a diode rectifier due to its circuit simplicity and low cost. However, since diode rectifiers have some intrinsic problems such as low power factor and high harmonic distortion, a wide use of such rectifiers may cause noises, malfunction and heat damage in both electrical power systems and electrical machinery systems. This paper proposes soft switched three-phase single switch boost-type converter. The proposed circuit can perform Zero Voltage Switched(ZVS) without using any current and voltage sensors. For this circuit, both simulation and experiments have been performed. The results not only confirmed the ZVS but also indicated that, compared to the conventional hard switched converter, the prosed circuit can improve the efficiency as much as 1.7 to 4.7[%] while keeping the same high power factor and small harmonic distortion in their AC input.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.570-573
• /
• 2004

This paper present a distributed RC lines (URCs) oscillator with sinusoidal output. The frequency of oscillator can be controlled and adjustable by varying an one pole amplifier. The circuit incorporated an gain controller loop for amplitude stabilization with low distortion. The realization of simulation and experimental results are in reasonably good agreement with the theoretical , and very low harmonic distortion. In this circuit can be suitable for LSI process fabrication and the circuit application in electronic communications system.

• 전기의세계
• /
• 제29권12호
• /
• pp.791-797
• /
• 1980

This paper is concerned with the study of improving the faults of phase control scheme and suggesting a new approach to the control of load circuit with AC source. AC current control can restrict the magnitude of current within the given upper and lower current and make current continuous during every cycle. Also the harmonic contents of current can be greatly reduced using this control scheme. Analog computer and digital computer simulations reveal that the current control scheme is superior to the phase control scheme in controlling the power supply to the load R-L. Experimintal results demonstrate the feasibility and verify the operation of current controlled system.