• 센서학회지
• /
• 제29권6호
• /
• pp.382-387
• /
• 2020

Hydrogen (H₂) is considered as a new clean energy resource for replacing petroleum because it produces only H₂O after the combustion process. However, owing to its explosive nature, it is extremely important to detect H₂ gas in the ambient atmosphere. This has triggered the development of H₂ gas sensors. 2-dimensional (2D) graphene has emerged as one of the most promising candidates for chemical sensors in various industries. In particular, graphene exhibits outstanding potential in chemoresistive gas sensors for the detection of diverse harmful gases and the control of indoor air quality. Graphene-based chemoresistive gas sensors have attracted tremendous attention owing to their promising properties such as room temperature operation, effective gas adsorption, and high flexibility and transparency. Pristine graphene exhibits good sensitivity to NO₂ gas at room temperature and relatively low sensitivity to H₂ gas. Thus, research to control the selectivity of graphene gas sensors and improve the sensitivity to H₂ gas has been performed. Noble metal decoration and metal oxide decoration on the surface of graphene are the most favored approaches for effectively controlling the selectivity of graphene gas sensors. Herein, we introduce several strategies that enhance the sensitivity of graphene gas sensors to H₂ gas.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2918-2922
• /
• 2007

This is a report of a feasibility study on the reduction of harmful substances such as particulate matters and nitric oxides emitted from diesel engines by using a plasma reforming system that can generate hydrogen-rich gas. In this paper, an exhaust reduction mechanism of the non-thermal plasma reaction was investigated to perform its efficiency and characteristics on producing hydrogen-rich gas. Firstly, we explain briefly the chemistry of hydrocarbon reforming. The experimental system is showed in the second part. Finally, we demonstrate the feasibility of producing hydrogen using non-thermal plasma. The experimental results are focused on the influence of the different operating parameters (air ratio, inlet flow rates, voltage) on the reformer efficiency and the composition of the produced gas.

• Carbon letters
• /
• 제23권
• /
• pp.69-73
• /
• 2017

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.223-227
• /
• 2005

A PCV valve is a part to control the flow rate of Blowby gas in a PCV system. A PCV system re-burns Blowby gas with fuel in a combustion chamber. Some gas enters to a crankcase room through the gap between piston ring and engine cylinder wall. This gas si called 'Blowby gas'. This gas causes many problems. In environmental view, Blowby gas includes about $25\~35\%$ hydrocarbon{HC) of total generated HC in an automobile. Hydrocarbon is a very harmful pollutant element in our life. In mechanical view, Blowby gas has some reaction with lubricant oil of crankcase room. Then, this causes lubricant oil contamination, crankcase corrosion and a decrease fo engine efficiency. Consequently, Blowby gas must be eliminated from a crankcase room. In this study, we simulated internal flow characteristics in a PCV valve according to spool dynamic behavior using local remeshing method And, we programmed our sub routine to simulate a spool dynamic motion. As results, spool dynamic behavior is periodically oscillated by the relationship between fluid force and elastic force of spring. And its magnitude is linearly increased by the differential pressure between inlet and outlet. Also, as spool is largely moved, flow area is suddenly decreased at orifice. For this reason, flow velocity is rapidly decreased by viscous effect.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.250.2-250.2
• /
• 2014

Currently, teeth whitening method which is applicable to dental surgery is that physician expertises give medical treatment to teeth directly dealed with a high concentration of hydrogen peroxide and carbamide peroxide. If hydrogen peroxide concentration is too high for treatment of maximized teeth whitening effect [1], it is harmful to the human body [2]. To the maximum effective and no harmful teeth whitening effect in a short period of time at home, we have observed the whitening effect using carbamide peroxide (15%) and a low-temperature atmospheric pressure plasma jet which is regulated by the Food and Drug Administration. The gas supplied conditions of the non-thermal atmospheric pressure plasma jet was with the humidified (0.6%) gas in nitrogen or air at gas flow rate of 1000 sccm. Also, the measurement of chemical species from the jet was carried out using the optical emission spectroscopy (OES), the evidence of increased reactive oxygen species compared to non-humidified plasma jet. We have found that the whitening effect of the plasma is very excellent through this experiment, when bovine teeth are treated in carbamide peroxide (15%) and water vapor (0.2 to 1%). The brightness of whitening teeth was increased up to 2 times longer in the CIE chromaticity coordinates. The colorimetric spectrometer (CM-3500d) can measure color degree of whitening effect.

• 한국환경과학회지
• /
• 제31권1호
• /
• pp.99-102
• /
• 2022

The aim of this study was to investigate the effect of manure additives mixed with probiotics and zeolite on harmful gas production generated by pig slurry. A total of 180 crossbred pigs ([Yorkshire × Land race] × Duroc, live weight 70±3.21 kg) were allotted to a completely randomized design with 3 treatments and 3 replications (20 heads per replicate). The treatments consisted of 0% (control), 0.05% (T1), or 1% (T2) of manure additives mixed with probiotics and zeolite. Manure additives were added weekly to pig slurry pits (2 m × 4.5 m × 1.2 m) on a volumetric basis. For ammonia measured at both 10 cm and 90 cm above the pig slurry pit, a statistical significance (p<0.05) was found in probiotics and zeolite-treated manure additives at weeks 1 - 3, except for week 0. In addition, hydrogen sulfide levels measured at 10 cm above the pig slurry pit were not affected by the manure additive at weeks 0 and 1, but showed a significant statistical difference at weeks 2 and 3 (p<0.05). Therefore, supplementing pig slurry with 0.05% and 0.1% manure additives mixed with probiotics and zeolite was found to be effective in reducing environmental pollution in pig facilities.

• 센서학회지
• /
• 제32권5호
• /
• pp.259-266
• /
• 2023

The use of various adulterants and harmful chemicals is rapidly increasing in various sectors such as agriculture, food, and pharmaceuticals, and they are also present in our surroundings in the form of pollutants. The regular and repeated intake of harmful chemicals often adversely affects human health. The prolonged exposure of living beings to such adverse components can lead to severe health complications. To avoid the unlimited utilization of these chemical components, a sensing technology that is sensitive and reliable for low-concentration detection is beneficial. Surface-enhanced Raman spectroscopy (SERS) is a powerful method for identifying low-range concentrations of analytes, leading to great applications in molecular identification, including various diagnostic biomarkers. SERS in chemical, gas, and biological sensors can be an excellent approach in the sensing world to achieve rapid and multiple-analyte detection, leading to a new and efficient approach in healthcare monitoring.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.69-76
• /
• 2008

탄화온도별로 제조한 신갈나무(Quercus mongolica Fischer)목탄과 낙엽송(Larix leptoepis)수피탄에 의한 유해가스 흡착성능 평가를 하여 본 결과, 탄화온도가 증가하면 비표면적과 탄소함량이 증가하는 경향이 있으나, $600^{\circ}C$이상의 온도에서는 상승폭이 둔화하였다. 또한 신갈나무탄과 낙엽송수피탄에 의한 유해가스 제거율 차이는 뚜렷하지는 않았으나, 탄화온도는 가스흡착성능에 큰 영향을 주는 것으로 나타났다. 즉, $300^{\circ}C$에서 탄화한 저온 목질탄화물은 목탄 또는 수피탄의 종류에 관계없이 50% 이하의 매우 낮은 악취가스 및 VOC 물질 제거율을 나타낸 반면, $600^{\circ}C$이상의 고온 탄화물은 목질의 종류에 관계없이 악취물질인 트리메틸아민, 메틸메르캅탄, 황화수소의 제거율과 VOC물질인 벤젠, 톨루엔, 자일렌 제거율이 거의 100%를 나타낼 정도로 높았으며, 흡착 10분 이내에 흡착평형에 이를 정도로 빠른 흡착성을 나타내었다. 한편 아세틸렌이나 $SO_2$, $NO_2$ 가스 제거율은 고온탄화물이라도 흡착 4시간 후인 흡착평형이 이루어지더라도 40% 이하로 매우 낮아 가스 종류에 따라서 흡착거동에 차이가 있었다. 이와 같이 탄화온도와 가스 종류에 따라 흡착성능이 달라지는 것은 비표면적과 같은 물리적인 요인뿐만 아니라 목탄의 관능기 종류 및 양에 의한 화학적 변화가 영향을 미치는 것으로 판단되며, 화학적 요인에 대한 구명이 필요할 것으로 생각된다.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2762-2770
• /
• 2000

The refuse incineration plant has an important role in saving the combustion energy for local heating system. But harmful combustion gas(NOx etc.) leads to some serious environmental problem. To reduce the gas, a SCR(Selective Catalytic Reduction)system is installed and it is controlled by adjusting the flow of ammonia gas(NH3) . In this paper, we apply a repetitive control method to reduce NOx by adjusting the flow of ammonia gas for SCR system in a refuse incineration plant which is located in Haeundae, Pusan, Firstly, we analyze the inlet NOx period by FFt method, and verify its periodic variations. Secondly, we design a repetitive control system by using state space model method. Lastly, the effectiveness of repetitive control system is shown by comparing to a conventional PID control in simulation and experimental results.

• Korean Chemical Engineering Research
• /
• 제60권4호
• /
• pp.519-524
• /
• 2022

국내 건축물 마감재는 국토교통부 고시에 따라 KS F 2271 기준에 의해 평가되어지고 있으며, 이 실험은 실험동물을 사용하여 평가하고 있다. 본 연구에서는 가연성이 높은 유기물 단열재 EPS, 우레탄, 페놀폼에 대해 실험을 진행하였다. 이 3종의 단열재가 연소 시 발생되는 유해성 가스에 의한 실험용 쥐의 평균행동정지시간을 측정하여, 실험용 쥐의 행동정지에 대한 원인을 분석하고자 하였다. 실험용 쥐의 행동정지에 대한 원인분석방법으로는 FTIR 분석과 연기밀도실험을 진행하였고, 마우스의 행동정지 원인을 입자상물질에 의한 질식과 가스상물질에 의한 독성흡입으로 구분하여 실험결과를 분석하였다. 실험결과 우레탄이 가장 유해한 단열재로 평가되었으며, 가스유해성 실험결과에 대한 원인분석으로 FTIR분석과 연기밀도 실험을 진행한 결과, 독성흡입에 의한 영향보다 질식에 의한 실험용 쥐의 행동정지가 높은 것으로 나타났다. 본 연구는 유해성가스의 원인분석에 대한 기초연구로서, 독성의 근거를 마련하고 나아가 다양한 재료와 가스에 대한 분석을 통하여 보다 구체적인 독성평가의 기준이 마련될 수 있을 것으로 기대된다.