• Korean Journal of Medicinal Crop Science
• /
• v.28 no.5
• /
• pp.354-359
• /
• 2020

Background: The recent, decline in Black-berry Magnolia Vine (Schisandra repanda; BMV) native to Jeju Island, Korea, has raised concerns about the causes of this decline. We investigated the native environment of S. repanda and evaluated its propagation through cuttings to provide preliminary data for its restoration in Jeju Island. Methods and Results: The native environment of the BMV in the Hallasan National Park was surveyed and the climatic variables (temperature and humidity) were analyzed. The effects of the sex of the donor plant (male/female) type of cutting (softwood/hardwood), and treatment with a plant growth regulator (indole-3-butylic acid/rootone) on the rooting of BMV were investigated. Additinallly, the rooting rate, root count, and root length, as well as temperature and humidity were measured in the vinyl moist chambers. BMV was observed in 63 plants distributed from 567 m to 1,364 m above sea level of the Hallasan National Park. In the cutting experiment, the rooting rate was 71.9%, and it was higer in female plants (75.0%) than in male plants (68.8%). Conclusions: The mass propagation of BMV through cuttings valuable for its restoration as without such safeguard measures, the population could face extinction within a few decades.

• Journal of Sericultural and Entomological Science
• /
• v.33 no.2
• /
• pp.68-71
• /
• 1991

Mulberry cuttings from shoots of Shinkwangppong(Morus bombycis koidz.) had been callused in vermiculite separately at 15, 20, 25 and 30$^{\circ}C$ for 15 days before transplanting them in greenhouse to make clear the effect of temperature on root formation and growth is as follow. The buds of cuttings started sprouting in 4 and 6 days of callusing at 30 and 25$^{\circ}C$, respectively, reaching 100% budding in 10 and 15 days of callusing. Budding was delayed, however, at low temperature, showing 86% and 92% at 15 and 20$^{\circ}C$, respectively, in 15 days. Rooting from the cuttings was also accelerated at high temperature, showing 97-100% rooting at 25$^{\circ}C$ and 30$^{\circ}C$, in 15 days of callusing but no more than 93% at low temperature even in 35 days. Although high temperature increased root number and length after 15 days in callusing, no differences showed in the number and the weight at more than 20$^{\circ}C$ in 35 days of cuttings.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.31-38
• /
• 2014

Rooting agents and shading treatments were tested in two different experiments to determine their effects on the establishment success of hardwood cuttings of three highbush blueberry varieties 'Bluecrop', 'Duke' and 'Sunrise'. For the experiment with rooting agents, one-cm long bases of the cuttings were dipped into solutions of IBA or NAA for 5 s, both at 0, 500 and $1000mg{\cdot}L^{-1}$ in 50% ethanol, and were also treated with Rootone$^{(R)}$ powder. Determined 90 days after cutting, the percent rooting and root weight were increased by NAA at $500mg{\cdot}L^{-1}$ in 'Bluecrop' and 'Sunrise', while in 'Duke' IBA at $500mg{\cdot}L^{-1}$ was effective. These auxin treatments were found to work better than a commercial product Rootone$^{(R)}$. The rooting agent-induced increases in root development resulted in better shoot growth of the cuttings in all three varieties, as determined after 90 days of further growth in individual containers. In the experiment with shading treatments, different levels of the shading treatment (30 to 90%) were imposed over the cutting bed under no mist. In all three varieties, 30% shading increased the percent rooting and root and shoot growth, compared to no shading control. However, shading levels higher than 50% shading were found to be inhibitory for hardwood cuttings of highbush blueberries, especially under the environmental conditions with no mist system.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.166-170
• /
• 2012

Most of Cudriania tricuspidata Bureau saplings in Korea have been produced by crown division. But the production of Cudriania tricuspidata B. saplings by this method is very low in efficiency and in uniformity. Therefore, to develop Cudriania tricuspidata B. saplings production system by cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to temperature on the bed, length, thickness of the hard wood cutting and rooting agent application. Of different concentration of rooting agent, the 5,000 ppm of 1-naphthalenacetic acid(NAA) and Indole butyric acid(IBA) were found to be the highest in rooting of hardwood cuttings; other concentration were in order as follows; 2,500, 1,000 and 10,000 ppm in concentration of rooting agents. The shading ratio of polyethylene film showed the highest rooting ratio of the softwood cuttings at 55%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.5
• /
• pp.301-308
• /
• 2005

This study was carried out to investigate the effect of stem-cutting (SC) length and portion on the major agronomic characters related with dry matter production and accumulation, and to examine their relation­ships in cassava. When cassava was planted with longer SCs or with older portion SCs, major canopy or source characters like leaf number and leaf area index developed excessively, while tuber yields could be reduced due to the decrease of root/shoot ratio, relative growth rate, root dry weight, and harvest index, particularly in the bitter varieties (high cyanide-level varieties). It was considered that the sweet varieties (low cyanide-level varieties) be early­bulked with higher tuber yield when they are planted with the 25-30 cm long SCs or with the SCs from young type to semi-mature portions of mother stems, while the bitter varieties with the 15-20 cm long SCs or with the SCs from semi-mature to hardwood portions of mother stems, respectively. However, a significant interaction between length and portion of SC was not observed in all agronomic characters.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.1-6
• /
• 1985

The purpose of this experiment lies in finding the most appropriate cutting condition of Taxus cuspidata Sieb. et Zucc. which has been considered valuable tree species in gardening. Statistical analysis was focused on the comparison of the average ratios of rooting between greenhouses and fields, based on the observation rooted autogenis. To conduct this survey, hardwood cutting of Taxus cuspidata Sieb. et Zucc. were performed at both places of experiment above on April 20, 1982 with rooting results calculated on October 31, 1982. After formation of cuttings, it was soaked in IBA 200 ppm for 12 hours and than put in a bed. A summary of the result is presented as follows; 1) Cutting at the greenhouse showed higher average rate of rooting than at fields. Same tendency was found regardless of the differences in treatment. 2) It was clear that IBA-treatment contributed remarkably to causing higher average rooting rate. As an evidence, when twenty centimeter cuttings were inserted sandy media, IBA-treated area resulted in eighty six percent of average rooting rate, as compared with only twenty three percent in nontreatment case. In case of field cutting, IBA-treatment brought about fifty three percent of rooting in comparison with eleven percent nontreatment. 3) When sandy soil, loam and brown soil were separately used as cutting media, the highest rooting rate was found in case of sandy soil, without any difference between the two experimental places above. 4) As a result of the analysis to seek the impact of the length of cuttings on rooting, the range of length form fifteen to twenty centimeter was apparently most appropriate. It was also found that the rate of rooting declined beyond twenty five centimeter. 5) Two kinds of rooting pattern were observed. One was the case that callus cell lump was created on the lower cut side of cuttings. Importantly, root radical were formed inside the lump to influence the germination of root system. The other relates to the case that adventitious root which look like lateral roots appeared at the stem region. In abstract, first, sandy soil was effectively recommended in case of hardwood cutting in April. Second, the most appropriate length of cuttings ranged between fifteen and twenty centimeters. Third, high density IBA treatment was clearly effective. Forth, for proper environmental management, both pre-disinfection of sail by sterilizer and maintenance of high relative humidity were essentially required.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.262-265
• /
• 2009

This study was conducted to find out a proper cutting time as related with a growth pattern for the mass propagation of Corylopsis coreana, which is one of the Korean endemic plant. New shoots began to grow in early April soon after end of blooming time and grew rapidly until the end of June. Shoot growth became dull after June and stopped in early September, showing a typical primary growth curve of temperate deciduous trees which show only one flush of growth throughout an annual growth cycle. The moisture content of shoot was the highest in an early growing season of May, and decreased with shoot maturity. Moisture content of cuttings taken on June 20 was 71.2%. Rooting was better in softwood cuttings than in hardwood cuttings. The highest value of rooting percentage was obtained in cuttings taken on June 20.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.71-75
• /
• 2008

The object of this study was to determine the optimum concentrations of boron and IBA and dipping time, and to investigate the effect of combined-treatment of boron and IBA for the improvement of rooting of semi-hardwood cutting of Styrax japonica. The rooting percentage and the number of roots of cuttings increased with short dipping treatment of $7,000mg{\cdot}L^{-1}$ IBA and combined treatment of $100mg{\cdot}L^{-1}$ IBA and $20mg{\cdot}L^{-1}$ boron or $100mg{\cdot}L^{-1}$ IBA and $60mg{\cdot}L^{-1}$ boron. The rooting percentage, no. of roots and fresh weight were higher in combined treatment of boron and IBA than treatment of IBA alone. Either $100mg{\cdot}L^{-1}$ or $200mg{\cdot}L^{-1}$ was regarded as in appropriate level of IBA and the optimal dipping time was three hour in single treatment of IBA. It is concluded that the combined treatment of low concentrations of IBA and boron could be substituted for the treatment of high concentration IBA.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.111-119
• /
• 2018

This study was carried out to investigate the growth characteristics and propagation methods of the Korean native Amelanchier asiatica, A. arborea, and A. alnifolia as fruit trees for gardens. Due to the lack of recent research on Amelanchier spp., their superficial classification is still unclear and the names are being used interchangeably. The results are obtained as follows : A. arborea and A. alnifolia were globular type multi-stemmed shrubs. A 20-year-old tree of A. asiatica was 7.8m in height, with a 5.2m crown width, with one trunk. As for the morphological characteristics, leaves of A. asiatica were oblong, with an acuminate of, 6.1cm and 3.6cm width, but A. arborea and A. alnifolia had acute obovate leaves. The leaf size of A. alnifolia was the largest among the three species. The flower size of A. asiatica was bigger than that of A. arborea and A. alnifolia. In addition, its petals and flower clusters were also the largest among the three species. The flowering of A. asiatica initiated on April 21 and then bloomed for a duration of 24 days in Osan, while that of A. arborea and A. alnifolia initiated flowering on April 12 and then bloomed for a duration of 22 days in the same location. The fruit of A. arborea and A. alnifolia were green on May 10~12, it changed into purplish red on May 24~26, and its matured on June 1~3. The duration of fruit persistence of A. arborea and A. alnifolia were 48~50 days. On the other hand, A. asiatica showed greenish fruit on May 20, it became red on September 4, and had fallen by October 3. The fruit size was the largest at 1.03cm of height and 1.12cm of diameter in the A. arborea, followed by the big berry of A. alnifolia and the smallest fruit in the native, A. asiatica. It was difficult to root due to the hardwood cutting of A. arborea at a 40% rate of rooting. In the softwood cutting, the rooting rate of A. arborea was increased by the treatment with concentrated IBA, especially at 5,000 and 7,000ppm. The optimum date for cutting was on June 27, when the rooting rate was more than 80%. The most effective method for rooting of A. arborea was rootone or 7,000 ppm IBA treatment on June 27 softwood cuttings, which showed a rooting rate of over 80%.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.45-52
• /
• 2008

The objectives of this study are to explain a supply plan of domestic softwood log by long-term prospect of MDF production to stably promote industry of MDF. For it, we developed the long supply function as Ordinary Least Squares Method. Between 2005 and 2050, it was estimated that quantity of domestic production of MDF increased from 1,653 thousand $m^3$ to 2,041 thousand $m^3$. In 2050, quantities of domestic softwood log used by raw materials to product MDF of 2,041 thousand $m^3$ were estimated to be used about 1,355 thousand $m^3$. Exampling Pinus rigida used presently by raw materials to product MDF, cutting area of it is estimated to be 10,828 ha per year. And larch is cutted about 9,160 ha per year. This study estimated annual softwood log cutting amount and total afforestation area at 2050 year by 3 scenarios which are 35%, 45% and 55% about use of domestic softwood log for MDF production. If we do a criterion of cutting area, we advantage to plant larch. But the species of trees are use and growth property. We think that the afforestation policy must be performed on the base of those to supply raw materials of MDF. Although government plans hardwood afforestation policy after cutting Pinus rigida, it needs to support and manage certainly afforestation area of softwoods to need to supply raw materials of MDF to stably promote industry of MDF.