• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.95-96
• /
• 2016

This paper presents a voltage and frequency droop control for accurate power sharing of parallel distributed generation (DG) inverters in low voltage microgrid. In practice, line impedances between inverters and the point of common coupling of a microgrid are not always equal. This inequality in line impedances often results in reactive power sharing mismatch among inverters. To address this problem, intensive researches have been conducting. Although these methods can solve the unbalanced reactive power sharing, there are still problems remain unresolved, such as complicated structure or circulating current. To overcome such problems, a new droop control scheme is proposed, which not only guarantees accurate reactive power sharing but also has simple structure so that it can be easily implemented in existing systems without any hardware modification. The simulation is performed using Matlab/Simulinks to validate the proposed scheme.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.1-10
• /
• 2010

In this paper, we present a fast Fourier transform (FFT) processor with four parallel data paths for multiband orthogonal frequency-division multiplexing ultra-wideband systems. The proposed 128-point FFT processor employs both a modified radix-$2^4$ algorithm and a radix-$2^3$ algorithm to significantly reduce the numbers of complex constant multipliers and complex booth multipliers. It also employs substructure-sharing multiplication units instead of constant multipliers to efficiently conduct multiplication operations with only addition and shift operations. The proposed FFT processor is implemented and tested using 0.18 ${\mu}m$ CMOS technology with a supply voltage of 1.8 V. The hardware- efficient 128-point FFT processor with four data streams can support a data processing rate of up to 1 Gsample/s while consuming 112 mW. The implementation results show that the proposed 128-point mixed-radix FFT architecture significantly reduces the hardware cost and power consumption in comparison to existing 128-point FFT architectures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1737-1744
• /
• 2010

The Image sensor needs various image processing to improve image quality. ISP(Image Signal Processor) performs various image processing. Conventional vision cameras have own software ISP functions and perform in PC instead of using commercial ISP chips. However these methods have problems such as large computation for image processing. In this paper, we proposed ISP that significantly reduced chip area by efficient sharing of hardware and software. Large operation blocks are designed to hardware for high performances, and we used hardware simultaneously with software considering the size of the hardware. The implemented ISP can process VGA(640*4800) images and has 91450 gate sizes in 0.35um process.

• Journal of information and communication convergence engineering
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2020

This paper proposes a fast-processing and low-cost hardware multiple input multiple output (MIMO) channel emulator. The channel emulator is an important component of hardware-based simulation systems. The novelty of this work is the use of sharing and pipelining functions to reduce hardware resource utilization while maintaining a high sample rate. In our proposed emulator, the samples are created sequentially and interpolated to ensure the sample rate is equal to the base band rate. The proposed 4 × 4 MIMO requires low-cost hardware resource so that it can be implemented on a single field-programmable gate array (FPGA) chip. An implementation on Xilinx Virtex-7 VX980T was found to occupy 10.47% of the available configurable slice registers and 12.58% of the FPGA's slice lookup tables. The maximum frequency of the proposed emulator is 758.064 MHz, so up to 560 different paths can be processed simultaneously to generate 560 × 758 million × 2 × 32 bit complex-valued fading samples per second.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.320-322
• /
• 2017

In this paper, a high-performance, low-area gradient-magnitude calculator architecture is proposed, based on approximate image processing. To reduce the computational complexity of the gradient-magnitude calculation, vector properties, the symmetry axis, and common terms were applied in a hardware-resource-shared architec-ture. The proposed gradient-magnitude calculator was implemented using an Altera Cyclone IV FPGA (EP4CE115F29) and the Quartus II v.16 device software. It satisfied the output-data quality while reducing the logic elements by 23% and the embedded multipliers by 76%, compared with previous work.

• Electronics and Telecommunications Trends
• /
• v.39 no.1
• /
• pp.36-47
• /
• 2024

Virtualization technology supports the execution of software unrelated to the hardware environment through the decoupling of software and hardware. Additionally, it enables network slicing, allowing one physical device to be divided and used by a function or service by supporting sharing with isolation. Virtualization enables flexible platform use, allowing a variety of services to be launched without changes or additions to the hardware platform. We describe virtualization technology trends in satellite/mobile communication systems. Basic concepts and technical definitions are included, and the current status of research and development by domestic and foreign organizations, including the Electronics and Telecommunications Research Institute, is analyzed. Finally, future prospects and implications are discussed.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.374-385
• /
• 2019

This paper presents an optimal implementation of a Daubechies-based pipelined discrete wavelet packet transform (DWPT) processor using finite impulse response (FIR) filter banks. The feed-forward pipelined (FFP) architecture is exploited for implementation of the DWPT on the field-programmable gate array (FPGA). The proposed DWPT is based on an efficient transpose form structure, thereby reducing its computational complexity by half of the system. Moreover, the efficiency of the design is further improved by using a canonical-signed digit-based binary expression (CSDBE) and advanced functional sharing (AFS) methods. In this work, the AFS technique is proposed to optimize the convolution of FIR filter banks for DWPT decomposition, which reduces the hardware resource utilization by not requiring any embedded digital signal processing (DSP) blocks. The proposed AFS and CSDBE-based DWPT system is embedded on the Virtex-7 FPGA board for testing. The proposed design is implemented as an intellectual property (IP) logic core that can easily be integrated into DSP systems for sub-band analysis. The achieved results conclude that the proposed method is very efficient in improving hardware resource utilization while maintaining accuracy of the result of DWPT.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.888-894
• /
• 2015

This paper describes an efficient hardware design of Lightweight Encryption Algorithm (LEA) developed by National Security Research Institute(NSRI). The LEA crypto-processor supports for master key of 128-bit. To achieve small-area and low-power implementation, an efficient hardware sharing is employed, which shares hardware resources for encryption and decryption in round transformation block and key scheduler. The designed LEA crypto-processor was verified by FPGA implementation. The LEA core synthesized with Xilinx ISE has 1,498 slice elements, and the estimated throughput is 216.24 Mbps with 135.15 MHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.777-779
• /
• 2014

The LEA(Lightweight Encryption Algorithm) is a 128-bit high-speed/lightweight block cipher algorithm developed by National Security Research Institute(NSRI) in 2012. The LEA encrypts plain text of 128-bit using cipher key of 128/192/256-bit, and produces cipher text of 128-bit, and vice versa. To reduce hardware complexity, we propose an efficient architecture which shares hardware resources for encryption and decryption in round transformation block. Hardware sharing technique for key scheduler was also devised to achieve area-efficient and low-power implementation. The designed LEA cryptographic processor was verified by using FPGA implementation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.93-96
• /
• 2008

This paper describes an efficient design of a multi-standard Viterbi decoder that supports multiple constraint lengths and code rates. The Viterbi decode. is parameterized for the code rates 1/2, 1/3 and constraint lengths 7, 9, thus it has four operation modes. In order to achieve low hardware complexity and low power, an efficient architecture based on hardware sharing techniques is devised. Also, the optimization of ACCS (Accumulate-Subtract) circuit for the one-point trace-back algorithm reduces its area by about 35% compared to the full parallel ACCS circuit. The parameterized Viterbi decoder core has 79,818 gates and 25,600 bits memory, and the estimated throughput is about 105 Mbps at 70 MHz clock frequency.