• International Journal of Control, Automation, and Systems
• /
• 제4권5호
• /
• pp.567-574
• /
• 2006

This paper presents the hardware implementation of a neural network controller for a nonlinear system with a micro-controller unit (MCU) and a field programmable gate array (FPGA) chip. As an on-line learning algorithm of a neural network, the reference compensation technique has been implemented on an MCU, while PID controllers with other functions such as counters and PWM generators are implemented on an FPGA chip. Interface between an MCU and a field programmable gate array (FPGA) chip has been developed to complete hardware implementation of a neural controller. The developed neural control hardware has been tested for balancing the inverted pendulum while controlling a desired trajectory of a cart as a nonlinear system.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.831-846
• /
• 2015

Magneto-Rheological (MR) dampers are being used increasingly because of their adaptability to control algorithms and reliability of passive systems. In this paper, an extensive investigation on performance of MR dampers in semi-active and passive modes has been carried out. It is observed that the overall energy dissipation by MR dampers in passive-on modes is higher than that in semi-active modes for most of the competitive semi-active controllers. Based on the energy dissipation pattern, a novel semi-active controller, termed as "Simple Passive Semi-Active Controller", has been proposed for MR dampers. This controller can be emulated by a simple passive hardware proposed in this paper. The proposed concept of controller "hardware emulation" is innovative and can also be implemented for other semi-active devices for control algorithms of certain form. The effectiveness and reliability of the proposed controller has been investigated extensively through numerical simulations. It has been demonstrated that the proposed controller is competitive to or more effective than other widely used / investigated semi-active controllers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.407-412
• /
• 1987

A large scale programmable controller is developed which adopts a multiprocessor structure. The developed programmable controller consists of the programmer, the system controller, and the input-output unit. The structure and characteristics of the system controller will be described. The PC has a special hardware scheme to solve the Boolean logic instructions of the sequence control programs. The multiprocessor structure and the special hardware enables, the real time operation and the high speed scanning which is prerequisite to the large scale, programmable controller even for many I/O points.

• Journal of Information Processing Systems
• /
• 제2권3호
• /
• pp.137-142
• /
• 2006

A large portion of the embedded system development process involves the integration of hardware and software. Unfortunately, communication across the hardware/software boundary is tedious and error-prone to create. This paper presents an automatic hardware/software interface generation system. As the front-end of hardware/software co-design frameworks, a system designer defines XML specifications for hardware functions. Our system generates hardware/software interfaces including Device Driver, Driver API, and Device Controller from these specifications. Embedded software designers can easily use hardware just like system libraries. Our system reduces the mistakes and errors that can be occurred when a software programmer directly connects software to hardware, and supports balancing labors between hardware developers and software programmers. Moreover, this system can be used as the back-end for a hardware/software co-design framework.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.189-189
• /
• 2000

A controller test on a sounding rocket using a testbed is discussed in the paper. Because of the high cost and the risk for the flight test the hardware simulation on the ground is performed. In this paper the conventional On/Off Controller is applied to the attitude control of a sounding rocket. The hardware simulation results are compared with those of the software simulation.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.32.2-32.2
• /
• 2011

State dependent Riccati equation (SDRE) control technique has been widely used in the control society. Although it solves nonlinear optimal control problems, which minimizes state error and control efforts simultaneously, it has drawbacks when it is to be applied to the real time systems in that it requires much computational efforts. So the real time system whose computational ability is limited (for example, satellites) cannot afford to use SDRE controller. To solve this problem, a hybrid controller which is based on MSDRE (Modified SDRE) and ANFIS (Adaptive Neuro-Fuzzy Inference System) has been proposed by Abdelrahman et al. (2010). We propose a hybrid controller based on SDRE and ANFIS, and apply the hybrid controller to the hardware attitude simulator to perform a HIL (Hardware-In-the-Loop) simulation. Through HIL simulation, it is demonstrated that the hybrid controller satisfies the control requirement and the computation load is reduced significantly. In addition, the effects of statistical properties of the ANFIS training data to the performance of the ANFIS controller have been analyzed.

• Journal of Power Electronics
• /
• 제13권2호
• /
• pp.313-321
• /
• 2013

This paper describes the operation analysis results of a communication-based DC micro-grid using a hardware simulator developed in the lab. The developed hardware simulator is composed of distributed generation devices such as wind power, photovoltaic power and fuel cells, and energy storage devices such as super-capacitors and batteries. Whole system monitoring and control was implemented using a personal computer. The power management scheme was implemented in a main controller based on a TMS320F28335 chip. The main controller is connected with the local controller in each of the distributed generator and energy storage devices through the communication link based on a CAN or an IEC61850. The operation analysis results using the developed hardware simulator confirm the ability of the DC micro-grid to supply the electric power to end users.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.688-694
• /
• 2021

The aim of this work is the analysis, design and hardware implementation of the fractional-order point kinetics (FNPK) model along with its closed-loop controller. The stability and closed-loop control of FNPK models are critical issues. The closed-loop stability of the controller-plant structure is established. Further, the designed PI/PD controllers are implemented in real-time on a DSP processor. The simulation and real-time hardware studies confirm that the designed PI/PD controllers result in a damped stable closed-loop response.

• 한국시뮬레이션학회논문지
• /
• 제28권4호
• /
• pp.11-20
• /
• 2019

본 논문에서는 반도체 FAB에서의 OHT의 제어기를 검증하는 HIL(Hardware-In-the-Loop) 시뮬레이션 방법론을 제안한다. 반도체 FAB의 OHT 네트워크에는 수많은 OHT들이 동시에 운영될 수 있으므로 OHT 제어기에 대한 완벽한 검증은 물류 설비 안정성을 보장하는 데 매우 중요하다. 제어기는 정상적인 상황에 대해서 뿐 아니라 예측하기 힘든 비정상적인 상황에 대해서도 고려하여 설계되어야 한다. 따라서 본 연구에서는 제어기의 검증을 위해 비정상 상황을 생성할 수 있는 레일 네트워크와 OHT를 포함한 가상 환경을 사용하는 HIL 시뮬레이션 방법론을 제안한다. 제안되는 HIL 시뮬레이션 방법은 구현되었고, 다양한 예제를 통해 테스트 되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.200-209
• /
• 2004

The fuzzy control based on $\alpha$-level fuzzy set decomposition. It is known to produce quick response and calculating time of fuzzy inference. This paper derived the embodiment computational algorithm for defuzzification by min-max fuzzy inference and the center of gravity method based on $\alpha$-level fuzzy set decomposition. It is easy to realize the fuzzy controller hardware. based on the calculation formula. In addition. this study proposed a circuit that generates PWM actual signals ranging from fuzzy inference to defuzzification. The fuzzy controller was implemented with mixed analog-digital logic circuit using the computational fuzzy inference algorithm by min-min-max and defuzzification by the center of gravity method. This study confirmed that the fuzzy controller worked satisfactorily when it was applied to the position control of a dc servo system.