• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.12-15
• /
• 1993

Critical shortage of natural aggregate for production of concrete is developing in many urban area. At the same time increasing quantities of demolished concrete form deteriorated and obsolete structures are generated as a waste material in the same areas. The reuse of a waste concrete may settle the problems of environmental pollution and shortage of adquate aggregate, Therefore, this study is to reuse a waste concrete as aggregate for concrete, It is the purpose of this present study to investigate and analyze how the addition rates of superplasticizer and curing condition affect the properties of fresh and hardened recycled aggregate concrete comparing with those of ordinary concrete and crushed stone concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.35-38
• /
• 1993

Although bonding material content of the high strength flowing concrete is very important in engineering properties, in rich mix concrete increasing the bonding material content may not follow more good properties. This study is to investigate the influence of the bonding material content affecting on the engineering properties of high strength flowing concrete, and this paper is to analyze the properties of hardened concrete. The results reveal that the strength of concrete having loss bonding material content is higher than that of concrete having more bonding material content, and that in proportion to increasing of concrete strength brittleness factors decrease, and that the static modulus of elasticity in this study is less than that in specification.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.11-14
• /
• 1991

Apparent diffusion coefficients of Cl-ions through hardened cement paste(HCP), which were partly substituted blending materials, were determined. Also, pore solution was extracted from HCP which were immersed in NaCl solution, and Cl- concentration of the solution were analyzed. Partly substitution of pozzolanic materials considerably reduced the diffusion rate for Cl-ions and Cl- concentration of pore solution. Binding capacity of Cl- is related to the content of Al2O3 and pozzolanic reactivity.

• 콘크리트학회논문집
• /
• 제26권1호
• /
• pp.23-34
• /
• 2014

초고성능 콘크리트(UHPC)를 현장에서 타설 하기 위해서는 타설 장비, 배근 상태, 타설 환경 등 현장 조건을 고려한 유동성 조절이 필요하다. 구성 재료와 배합비가 최적화된 UHPC 제품에서 유동성 조절을 위해 현실적으로 변경 가능한 방법은 물-결합재 비(W/B) 또는 고성능 감수제 혼입률(SP/C)을 조절하는 것이며, 경제적 이유로 강섬유 혼입률도 변경 할 수 있다. 일반 콘크리트와는 달리 UHPC는 아주 작은 재료와 배합비 변화에도 굳기 전 또는 굳은 성능에 많은 차이를 나타낸다. 따라서 이 연구에서는 이러한 요인들이 UHPC의 슬럼프 플로와 공기량에 미치는 영향, 그리고 인장 및 압축 성능에 미치는 영향을 알아보았으며, 슬럼프 플로와 공기량과의 선형적인 상관관계를 이용하여 이러한 성능들을 예측할 수 있는 식을 유도 하였다. UHPC의 특성 중 하나인 자기 충전성을 만족하는 조건에서 압축강도에 관한 최적 W/B와 SP/C는 각각 16.8%와 3%로 결정 되었으며, 이러한 조건에서 측정된 공기량은 3.2~4.2%로 이 범위에서의 공기량은 압축강도에 영향을 미치지 못하는 것으로 나타났다. 휨 인장강도에 있어 W/B와 SP/C는 무시할 만큼 작은 영향을 미쳤으며, 상온 양생한 UHPC의 경우 섬유 혼입률이 휨 인장성능을 지배 하는 것으로 평가 되었다. 다만, 체적비로 1%의 강섬유가 혼입된 시편의 경우 섬유가 혼입되지 않은 시편과 달리 균열 후 연성적인 거동은 보였으나, 강도 증진에는 효과가 없는 것으로 나타났다. 반면, 체적비 2%의 강섬유가 혼입된 시편은 강도와 연성을 크게 증가시켰다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.669-674
• /
• 2002

This paper describes the properties analysis of concrete using bleeding reduction agent. According to the results, the fluidity and the air content of fresh concrete with increase of bleeding reduction agent show little difference in compare with plain concrete which does not use bleeding reduction agent. The efficiency of bleeding reduction agent is confirmed because in variation of W/C and slump, the increase of bleeding reduction agent dosage reduces bleeding remarkably. And the compressive strength of hardened concrete does not show any differences with increase the dosage of bleeding reduction agent. Bleeding reduction agent does not have bad effect on the quality of concrete such as fluidity, air content and the strength of hardened concrete and so on, the dosage of it can reduce bleeding effectively.

• International Journal of Concrete Structures and Materials
• /
• 제7권2호
• /
• pp.165-174
• /
• 2013

Portland cement concrete exposed to high temperatures during mixing, transporting, casting, finishing, and curing can develop undesirable characteristics. Applicable requirements for such the hot weather concrete differ from country to country and government agencies. The current study is an attempt at evaluating the hardened properties of the concrete exposed to hot weather in fresh state. First of all, this study reviews the current state of understanding and practice for hot weather concrete placement in US and then roadway sites with suspected hot weather concrete problems were investigated. Core samples were obtained from the field locations and were analyzed by standard resonance frequency analysis and the boil test. Based on the results, there does not appear to be systematic evidence of frequent cracking problems related to high temperature placement. Thus, the suspicious deteriorations which are referable to hot weather concreting would be due to other factors.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.979-984
• /
• 2003

Quality control of ready-mixed concrete is most important in the production step because, the performance of hardened concrete is revealed due to ready-mixed concrete. Hardened concrete has several properties physically. Above all things compressive strength of concrete has a greate effect in the design of structures, analysis, and durability. Compressive strength is simple predicted by w/c up to date, but there are some limits because different compressive strengths can be revealed in the same w/c. Therefore this study contributes to the quality control of ready-mixed concrete through statistical analysis for the relation between mix factors in mix design and compressive strength, predictable equation for compressive strength.

• International Journal of Concrete Structures and Materials
• /
• 제8권3호
• /
• pp.251-258
• /
• 2014

The use of sustainable technologies such as supplementary cementitious materials, and/or recycled post-consumer environmental wastes is widely used in concrete industry in the last decade. This paper presents the results of a laboratory investigation of normal concrete containing sustainable technologies. Twenty one mixtures (21) were prepared with different combinations of silica fume, fly ash, olive's seed ash, and corncob ash (CCA). Fresh and hardened concrete properties were measured, as expected the inclusion of the sustainable technologies affected both fresh and hardened concrete properties. Based on the results obtained in this study and the analyses conducted, the following observations were drawn: replacing the cement by olive's seed ash or CCA has a significant effect on fresh concrete workability. Olive's seed ash increased the slump by more than 200 % compared to the control mixtures. The compressive strength of mixtures containing olive's seed ash showed by 45 and 75 % decrease compared to the control mixtures. The 28 days compressive strength of mixtures produced by CCA of 10 % replacement decreased by 41 % compared to the control mixture.

• Advances in concrete construction
• /
• 제3권2호
• /
• pp.145-159
• /
• 2015

The evolution of nanotechnology provides materials with advance properties. It's a fast growing area of research to introduce the oxide nanoparticles into the cement pastes to improve their performance. The purpose of this paper is to review the effects of oxide nanoparticles (such as $SiO_2$, $TiO_2$, $Fe_2O_3$, $ZnO_2$, $Cr_2O_3$ and $Al_2O_3$) on both of hardened concrete properties (i.e., compressive strength, split tensile strength and flexural strength, water permeability, Abrasion resistance and pore structure of concrete) and fresh concrete properties (i.e., workability and setting time). Graphical representations of all these parameters were presented to facilitate the comparison of the effect of oxide nanoparticles on concrete processing. The paper also introduces some discussion about future work in this direction by identifying some open research area.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.209-212
• /
• 2004

Recent economic development caused a vast use of mineral resources in Korea. Consequently, a supply of poor quality course aggregate (poor particle shape as well as poor gradation) in construction material become a social problem. In this study, an effect of aggregate particle shape on property of concrete was evaluated. The flat and elongation ratio of crushed aggregate was controled to 8, 15, 25, 35, and $47\%$ in order to evaluate fresh concrete behavior as well as physical properties in hardened concrete. Test result shows a poor aggregate particle shape cause a significant increase in entrapped air in fresh concrete, while no significant effect on hardened concrete property, such as strength as well as stiffness. This increase in entrapped air, however, believed to cause a significant decrease in concrete durability.