• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.45-56
• /
• 1999

Seismic refracrion and reflection surveys were conducted along an E-W trending track of 482 m long in Ilwall-dong, Pohang. End-on spread was employed as source-receiver configuration with 2 m for both geophone interval and offset. Seismic data were acquired using 24 channels at every shot fired every 2 m along the track. Refraction data were interpreted using equations for multi-horizontal layers. Reflection data were processed in the sequence of trace edit, gain control, CMP sorting, NMO correction, mute, common offset gathering, and filtering to produce a single fold seismic section. There are two layers in shallow subsurface of the study area. Upper layer has the P-wave velocities ranging from 267 to 566 m/s and is interpreted as a layer of unconsolidated sediments. Lower layer has P-wave velocities of 1096-3108 m/s and is interpreted as weathered rock to hard rock. Most of the lower layer classified as soft rock. Upper layer has lateral variations in both P-wave velocity and thickness. The upper layer in the eastern part of the seismic line is 3-5 m thick and has P-wave velocity of 400 m/s in average. The upper layer in the western part is 8-10 m thick and has P-wave velocity of 340 m/s in average. The eastern part is interpreted as unconsolidated beach sand, while the western part is interpreted as infilled soil to develop a construction site. Three fault systems of high angle are imaged in seismic reflection section. It is interpreted that the area between these fault systems are relatively safe. Large buildings should be located in the safe ground condition of no fault and footings should be designed to be in the basement rock of 3-10 m deep below the surface.

• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.64-73
• /
• 2015

Recently, hydraulic fracturing is used in various fields and microseismic monitoring is one of the best methods for judging where hydraulic fractures exist and how they are developing. When locating microseismic events using single vertical well data, distances from the vertical array and depths from the surface are generally decided using time differences between compressional (P) wave and shear (S) wave arrivals and azimuths are calculated using P wave hodogram analysis. However, in field data, it is sometimes hard to acquire P wave data which has smaller amplitude than S wave because microseismic data often have very low signal to noise (S/N) ratio. To overcome this problem, in this study, we developed a grid search algorithm which can find event location using all combinations of arrival times recorded at receivers. In addition, we introduced and analyzed the method which calculates azimuths using S wave. The tests of synthetic data show the inversion method using all combinations of arrival times and receivers can locate events without considering the origin time even using only single phase. In addition, the method can locate events with higher accuracy and has lower sensitivity on first arrival picking errors than conventional method. The method which calculates azimuths using S wave can provide reliable results when the dip between event and receiver is relatively small. However, this method shows the limitation when dip is greater than about $20^{\circ}$ in our model test.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.731-739
• /
• 2014

This paper describes the evaluation of the impact performance of steel fiber-reinforced concrete based on high-velocity impact experiments using hard spherical balls. In this experimental study, panel specimens with panel thickness to ball diameter (h/d) ratios of 3.5 or less were tested with variables of steel fiber volume fraction, panel thickness, impact velocity, and aggregate size. Test results were compared with each other to evaluate the impact resistance. The results showed that the percentage of weight and surface loss decreased as the steel volume fraction increased. However, the penetration depth increased with up to steel fiber volume fraction of 1.5%. Particularly the results of specimens with 20 mm aggregates showed poorer performance than those with 8 mm aggregates. The results also confirmed that the impact performance prediction formulas are conservative with (h/d) ratios of 3.5 or less. Despite the conservative predictions, the modified NDRC formula and ACE formula predict the impact performance more consistently than the Hughes formula.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.635-643
• /
• 2014

Sustaiable development yield of groundwater in Korea has been determined according to 10 year drought frequency of groundwater recharge in the standard mid-sized watershed or relatively large area of district. Therefore, the evaluation of groundwater impact in a small watershed is hard to apply. Fot this purpose, a novel approach to estimate cell based sustainable development yield of groundwater (SDYG) is suggested and applied to Gyeongju region. Cell based groundwater recharge is computed using hydrological component analysis using the SWAT-MODFLOW which is an integrated surface water-groundwater model. To estimate the potential amount of groundwater development, the existing method which uses 10 year drought frequency rainfall multiplied by recharge coefficient is adopted. Cell based SDYGs are computed and summed for 143 sub-watersheds and administrative districts. When these SDYGs are combined with groundwater usage data, the groundwater usage rate (total usage / SDYG) shows wide local variations (7.1~108.8%) which are unseen when average rate (24%) is only evaluated. Also, it is expected that additional SDYGs in any small district could be estimated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.155.2-155.2
• /
• 2013

Strain-relaxed SiGe layer on Si substrate has numerous potential applications for electronic and opto- electronic devices. SiGe layer must have a high degree of strain relaxation and a low dislocation density. Conventionally, strain-relaxed SiGe on Si has been manufactured using compositionally graded buffers, in which very thick SiGe buffers of several micrometers are grown on a Si substrate with Ge composition increasing from the Si substrate to the surface. In this study, a new plasma process, i.e., the combination of PIII&D and HiPIMS, was adopted to implant Ge ions into Si wafer for direct formation of SiGe layer on Si substrate. Due to the high peak power density applied the Ge sputtering target during HiPIMS operation, a large fraction of sputtered Ge atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed Ge plasma, the ion implantation of Ge ions can be successfully accomplished. The PIII&D system for Ge ion implantation on Si (100) substrate was equipped with 3'-magnetron sputtering guns with Ge and Si target, which were operated with a HiPIMS pulsed-DC power supply. The sample stage with Si substrate was pulse-biased using a separate hard-tube pulser. During the implantation operation, HiPIMS pulse and substrate's negative bias pulse were synchronized at the same frequency of 50 Hz. The pulse voltage applied to the Ge sputtering target was -1200 V and the pulse width was 80 usec. While operating the Ge sputtering gun in HiPIMS mode, a pulse bias of -50 kV was applied to the Si substrate. The pulse width was 50 usec with a 30 usec delay time with respect to the HiPIMS pulse. Ge ion implantation process was performed for 30 min. to achieve approximately 20 % of Ge concentration in Si substrate. Right after Ge ion implantation, ~50 nm thick Si capping layer was deposited to prevent oxidation during subsequent RTA process at $1000^{\circ}C$ in N2 environment. The Ge-implanted Si samples were analyzed using Auger electron spectroscopy, High-resolution X-ray diffractometer, Raman spectroscopy, and Transmission electron microscopy to investigate the depth distribution, the degree of strain relaxation, and the crystalline structure, respectively. The analysis results showed that a strain-relaxed SiGe layer of ~100 nm thickness could be effectively formed on Si substrate by direct Ge ion implantation using the newly-developed PIII&D process for non-gaseous elements.

• Journal of Yeungnam Medical Science
• /
• v.18 no.1
• /
• pp.85-93
• /
• 2001

Background: The number of glomerulus has been considered one of the etiologic factors especially for focal segmental glomerulosclerosis. However, glomeruli are too many to calculate them correctly. Although the fractionator method has became convinced, in which they used selected sections, not whole kidney sections, with same intervals, it is also very hard to get good results. Because it is still very time-consuming and laborous work which leads to make big observers' biases. Methods and Materials: We designed the index for glomerular number to estimate the tendency of increase or decrease of the number of it in different kidneys and which was evaluated by other conventional methods including fractionator method. Index was based upon the theory by Nyengaard; "the number of glomerulus correlates with the weight of kidney, which is positively correlated with body weight". Calculating formula is the number of glomeruli/surface areas of cortices, which contain calculated glomeruli multiplies by kidney weight/body weight. Results: We applied this index to kidneys of FGS/Kist mouse and those of RFM/Nga mouse. The former is spontaneous glomerulosclerosis model with heavy protein uria and renal failure and the latter is the mother side of FGS/Kist mouse but has no glomerular disease or protein uria. The number of glomerulus of FGS/Kist mouse was decreased by 30% to those of RFM/Nga mouse. Conclusion: This index was useful and reliable for estimating the relative glomerular number between two groups.

• Cross-Cultural Studies
• /
• v.34
• /
• pp.7-41
• /
• 2014

This article examines magical realism in contemporary european film, which is considered to be one of the most popular styles in the present culture, with regards to Antonio Negri's theory of art. Magical realism is "alternative approach to reality" (Maggie Ann Bowers, Magic(al) Realism) and defined as "a fictional technique that combines fantasy with raw physical reality or social reality in a search for truth beyond that available from the surface of everyday life" (Joan Mellen, Magic Realism). The term of Magic Realism was coined in 1923 by Franz Roh, German art historian, as the concept for the post-expressionist painting in Germany. It has flourished in the Latin-American literature during the 1950s to 1980s and spread worldwide. Since 1980s magical realism is considered to be a universal artistic mode. Since 1990s magical realism is to find in the various novels, and since 2000 one encounters magical realism in the cinema very often. Antonio Negri writes about the relationship between life, imagination, art and the political in his book Art et Multitude. According to Negri, the hard life of people in the present society liberates the imagination and this creates the art as "the excess of the existence". In this process the aesthetic becomes to the political. Negri calls this space of art as "magical time and space". Claire Denis' film Vendredi Soir is analyzed as a contemporary magic realist text, which realizes Negri's concept of art: vendredi soir (friday night) in Vendredi Soir is the magical time, when the impossible becomes the possible, and paris in the public transportation strike is the magical space, where the individuals meet the other in a new situation. The film analysis associates itself with Negri's theory of art: in Vendredi Soir, it is to see, that the excess of the existence liberates imagination and creates the magic reality both in the movements of things and the human relationship. The phenomenon of magical realism in contemporary culture can be understood as the symptom of the emotional and existential pains of contemporary people in the current world. The contemporaneity of the magical realism can be read in the film as "the metaphor for contemporary thought" (Alain Badiou, Cinema). As Antonio Negri writes, art can become "the aesthetic redemption" (Negri, Art et Multitude) for us. At the same time "(t)his is where aesthetics can be transformed into the political." (Lee, "Communism and the Void")

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.243-254
• /
• 2019

In this study, problems of the waterproofing methods in which water leakage occurs in the upper slab of the underground parking lot of apartment houses and the requirements considering the characteristics of the upper slab, and selected the appropriate performance(proposal) for the composite polyurea process are reviewed. As a result of the study, it is necessary to review performance such as responsiveness to upper slab of the multi-unit underground parking lot that is comprised of (1) crack and behavior responsiveness, (2) surface integrity, (3) vertical watertight stability, (4) pressure layer construction, (5) impact and pressure response and (6) vehicle moving load. As a result of evaluating 5 items corresponding to the requirements for the soft and hard complex polyurea, all of them were found to meet the conditions, and each materials were improved by compounding the materials that had problems when applying a single-ply method, thereby clarifying the advantages and disadvantages of the material property. However, in order to apply to the actual site, additional evaluation on site applicability such as mock-up evaluation should be conducted, and subsequent studies on the applicability of the market through review of economic feasibility and maintenance is required.

• The Korean Journal of Malacology
• /
• v.27 no.2
• /
• pp.99-105
• /
• 2011

This study was conducted to compare the species composition of sessile organisms on the artificial substrates of PVC submerged at different time intervals and duration in Jangmok Bay, Geoje Island, southern coast of Korea. Three PVC plates were submerged at one month interval from March to October and retrieved in November, 2007. A mussel, Mytilus galloprovincialis exclusively occupied the artificial substrates submerged from March to April and occurred as a dominant species to July. An ascidian, Styela plicata occurred as a dominant sessile species from May to August. Balanus amphtrite, Bugula sp., and hydrozoans occurred as dominant species on the plates submerged from July to September. There was a mis-match between the peak time of settlement and dominance of sessile organisms due to the interspecies competitions when the PVC plates were retrieved in November. There was no clear relationship between submerged duration and the abundance of sessile organisms due to the different settlement period. M. galloprovincialis seemed to be a strong competitor which could exclude the previous recruiters of macroalgae by overgrowth and occupy the substrate surface and maintain its high population density by preventing the settlement of other species until late autumn. These results suggested that the composition of sessile organisms in vacant hard substrates could be determined by the combined effects of supply-timing of larvae and post-settlement competitions.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.485-489
• /
• 2018

A mungbean cultivar "Munpyeong" (Vigna radiata (L.) Wilczek) was derived as a cross between "Keumseong" and "IT163157" at the Jeollanamdo Agricultural Research and Extension Services (JARES) in 2013. "Munpyeong" has an erect growth habit, heart leaflet, green hypocotyls, black and straight pods when matured, and a dull green seed surface. The stem length of "Munpyeong" was 60 cm, which was 6 cm shorter than that of the control cultivar "Owool." The pod number per plant was 25, which was 3 more than that of the control cultivar. The 1000 seed weight of "Munpyeong" was 45 g, which was 4 g lighter than that of the control cultivar "Owool." Its field resistance to mungbean mottle virus, cercospora leaf spot, and powdery mildew are similar to the control cultivar, whereas its field resistance to lodging was slightly stronger. The hard seed rate of "Munpyeong" was 3.2%, which was similar to that of the control cultivar. The sprout yield ratio was 7.54 times, which was 9% more than that of the control cultivar. The average yield of "Munpyeong" was 1.93 ton/㏊, which was 21% more than that of the control cultivar "Owool" (Cultivar registration number: 5878).