• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.190-191
• /
• 2014

마그네슘 합금을 생체재료로 사용되는데 두가지 중요한 문제점을 가지고 있다. 매우 빠른 부식을 가지고 있으며, 초기 빠른 부식으로 수소기체를 발생하여 인체 내 피부나 골조직의 괴사를 동반한다. 이러한 문제점을 해결하기 위해 생체적합성이 뛰어난 아노다이징 방법을 개발 하였으며, 새롭게 개선된 방법의 특징을 비교하기 위해 이번 실험에서는 불화물이 포함된 전해액으로 아노다이징 처리한 샘플을 제조하여 형태학 분석을 진행 하였고, Hank's solution(생체모사용액)을 사용하여 부식 특성을 분석하였다. 또한 L929 세포를 이용하여 세포독성 평가를 진행하였다. 새롭게 제조한 방법은 기존의 방법과 비교하였을 때, 부식 성능은 비슷하고 생체적합성이 높아 생분해성 금속의 표면처리에 적합하다고 판단된다.

• Corrosion Science and Technology
• /
• 제15권2호
• /
• pp.43-53
• /
• 2016

In this study, electrochemical impedance spectroscopy (EIS) was used to examine the changes in the electrochemical properties of biodegradable pure magnesium implanted into Sprague-Dawley rats for three days. The in vivo test results were compared with those of the in vitro tests carried out in Hank's, dilute saline and simulated body fluid (SBF) solutions. The in vitro corrosion rates were 20~1700 fold higher, as compared to the in vivo corrosion rates. This discrepancy is caused by biomolecule adsorption on the surface, which prevents the transport of water into the magnesium surface on in vivo testing. Among the in vitro experimental conditions, the corrosion rate in SBF solution had the least difference from the in vivo implanted specimen.

• 한국동물위생학회지
• /
• 제22권2호
• /
• pp.129-134
• /
• 1999

A preservation test of Toxoplasma gondii tachyzoites for considerable time was tried to obtain simple and economical methods using various suspending media at $4^{\circ}C$ rather than serial passage of the parasite in mice. The preservation period was a term that the tachyzoites were detected from the peritoneal fluid of mice after inoculation of 2$\times$$10^5$ organisms preserved according to the lapse of time. The numbers of tachyzoite per 1\textrm{mm}^3$ of the peritoneal fluid with 2$m\ell$ of the saline solution taken in 4days after inoculation were presented as percentage in proportion to the control. The numbers. of tachyzoite per 1\textrm{mm}^3$ of the peritoneal fluid of the control were consisted of the average number of the tachyzoites of 10 mice inoculated with 2$\times$$10^5$ organisms by serial mouse passage. The tachyzoites could be preserved for 26 days in the suspending medium of saline solution at $4^{\circ}C$ Ringer's solution for 18 days, Hank's solution for 28 days, and egg-glycerine solution for 50 days.

• 한국임상수의학회지
• /
• 제22권4호
• /
• pp.322-327
• /
• 2005

보체의존성 세포독성반응(CDC)을 이용한 DLA class I교차 반응의 실험방법을 정립함으로써 개의 동종 신장이식 후 초기에 발생되는 초급성 거부반응을 억제하는데 응용하고자 븐 실험을 실시하였다. 체중(약 5kg)과 연령(약 1년령)이 유사한 잡종견을 대상으로 적혈구 교차 반응을 실시하여 상호 음성인 7마리를 실험에 사용하였다. 혈액형이 동일한 개체를 대상으로 CDC검사를 실시하였으며, Anti-dog serum, Hank's balanced salt solution (HBSS), 그리고 자가 혈청을 각각 양성 음성 그리고 자가 대조 혈청으로 이용하였다. Class I보체와 반응시킨 후 에오신으로 염색하여 고정한 다음 위상차 현미경 100배율에서 조사하였다. 국제 Cytotoxicity scoring system에 의하려 죽은 세포가 $20\%$ 이상이면 양성으로 평가하였다. CDC 결과 동일 혈액형 군에서 상호 음성이 나온 경우를 대상으로 상호 동종이식을 실시하여 초급성 거부반응의 발생 정도를 평가하였다. 혈액형이 1.2 B인 4두 중 1두는 자가항체를 가지고 있었다. CDC 결과 동일 혈액형 군에서 각각 1쌍이 상호 음성을 나타내었고, 혈액형이 다른 1쌍에서도 상호 음성이 관찰되었다. 혈액형이 동일하고 CDC음성인 2쌍 4두를 대상으로 상호 신장 이식을 한 결과 4마리 모두 초급성 거부반응이 나타나지 않았다. 이 실험에서 확립한 DLA교차 방법은 동종 이식에서 초급성 거부반응을 억제하는데 효과적인 방법이며, 향후 개의 동종 장기 이식에서 조직적합성 평가를 위해 응용될 수 있을 것이라 사료된다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권2호
• /
• pp.93-99
• /
• 2006

In this paper, we fabricated and evaluated polydimethylsiloxane(PDMS)-based flexible and implantable micro electrodes. The electrode patterning was carried out with the photolithography and chemical etching process after e-beam evaporation of 100 ATi and 1000 A Au. The PDMS substrate was treated by oxygen plasma using reactive ion etching(RIE) system to improve the adhesiveness of PDMS and metal layers. The minimum line width of fabricated micro electrode was 20 $\mu$m. After finished patterning, we did packaging with PDMS and then brought up the electrode's part about 40 $\mu$m with gold electroplating. The Hank's balanced salt solution(HBSS) test was carried out for 6 month for endurance of fabricated micro electrode. We carried out in-vivo test for the evaluation of biocompatibility by implanting electrodes under the ICR mouse skin for 42 days.

• 한국재료학회지
• /
• 제14권12호
• /
• pp.876-884
• /
• 2004

This study was to investigate whether the bioactivity of the anodized and hydrothermally treated Ti-6Al-7Nb alloy were affected by the time of hydrothermal treatment. Anodizing was performed at current density 30 $mA/cm^2$ up to 300 V in electrolyte solutions containing $DL-{\alpha}-glycerophosphate$ disodium salt hydrate $(DL-{\alpha}-GP)$ and calcium acetate (CA). Hydrothermal treatment was done at $300^{\circ}C$ for 30 min, 1 hr, 2 hrs, and 4 hrs to produce a thin film layer of hydroxyapatite (HA). The bioactivity was evaluated from HA formation on the surfaces in a Hanks' solution with pH 7.4 at $36.5^{\circ}C$ for 10, 20, and 30 days. Anodic oxide films were porous with pore size of $1\sim4{\mu}m\;and\;3\sim4{\mu}m$ thickness. The anodic oxide films composed with strong anatase peak with presence of rutile peak, and showed the increase in intensity of anatase peak after hydrothermal treatment. It was shown that the intensity of anatase peak increased with increasing the time of hydrothermal treatment but was no difference in rutile peak. The corrosion voltage was the highest in the group of hydrothermal treatment for 2 hrs (Ecorr: -338.6 mV). The bioactivity in Hank's solution was accelerated with increasing the time of hydrothermal treatment.

• 한국결정성장학회지
• /
• 제20권5호
• /
• pp.237-242
• /
• 2010

Mg-BCP(Mg Substituted BCP)를 제조하기 위하여 $Ca(NO_3)_2{\cdot}4H_2O$(Katayama chemical, Japan)과 $(NH_4)_2{\cdot}HPO_4$ (Junsei chemical, Japan), $Mg(NO_3)_2{\cdot}6H_2O$(Junsei chemical, Japan)를 출발물질로 공침법(co-precipitation process)을 이용하여 합성하였다. 제조된 분말의 마그네슘의 첨가에 따른 분말의 분광학적 특성은 FT-IR(MAGNA-IR 560, Nicolet)을 통하여 분석하였으며, SEM(S-4200, Hitachi)을 통하여 미세구조를 분석하였다. XRD 회절피크의 면적적분강도를 Integral Analysis (Rigaku, Japan)를 이용하여 HAp와 ${\beta}$-TCP의 비율을 확인하였다. 1.0 wt% 마그네슘이 첨가된 BCP 샘플의 경우 Hank's solution에서의 2주 침적 후 표면에 침상의 HAp로 추정되는 결정이 성장하였다. 이러한 미세구조의 변화는 생활성을 가지는 마그네슘의 첨가가 BCP 조직 내에서 표면의 활성을 증가시켜 결정의 성장을 촉진시킨 것으로 판단된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.213-214
• /
• 2009

A thin film hydroxyapatite (HA) films was deposited on anodized titanium by RF sputtering method. The anodized titanium enhanced the biocompatibility of the Ti and the bioactivity was improved further by the HA deposited on the anodized Ti. $TiO_2$ layer with $0.2{\sim}0.5{\mu}$ diameter pore size was formed on the Ti surface by anodization. Anodized $TiO_2$ layer analysis HA film deposited, oxide pore size and number decreased compared with non-HA deposited surface. The corrosion resistance of HA deposited/anodized Ti was higher than that of the non-treatment Ti alloy in Hank's solution, indicating better protective effect. From the results of cell culture using MTT assays, the best cell proliferation showed in HA deposited surface after anodization of Ti surfaces compared with another surface treatment.

• 대한소아치과학회지
• /
• 제34권1호
• /
• pp.36-42
• /
• 2007

외상성 손상 후 치아 탈구 시 치아를 저장하는 저장용액의 종류와 온도가 치주인대세포의 생존율에 어떠한 영향을 미치는지 연구하기 위하여 치주인대세포를 10% fetus bovine serum(FBS) 함유 ${\alpha}-minimal$ essential medium$({\alpha}-MEM)$에서 $37^{\circ}C$ 5% $CO_2$ 공기 혼합 배양기에서 배양하고 4 25, $37^{\circ}C$의 Hank's balanced salt solution(HBSS) 과 ${\alpha}-MEM$, 우유(S회사, P회사), tap water에 저장하고 60분이 지난 후 각 군에 대해 치주인대세포의 생존율을 측정하기 위하여 MTT assay를 시행하여 다음과 같은 결과를 얻었다. 1. $4^{\circ}C$ 저장용액의 치주인대세포의 생존율은 ${\alpha}-MEM$과 P회사우유에서 가장 높았고 HBSS, S회사우유, tap water 순으로 낮았다. 2. $25^{\circ}C$ 저장용액의 치주인대세포의 생존율은 ${\alpha}-MEM$에서 가장 높았고 P회사우유, HBSS, S회사우유, tap water 순으로 낮았다. 3. $37^{\circ}C$ 저장용액의 치주인대세포의 생존율은 ${\alpha}-MEM$과 P회사우유, HBSS, S회사우유에서 높았고 tap water에서 가장 낮았다. 4. ${\alpha}-MEM$의 치주인대세포의 생존율은 $4^{\circ}C$에서 가장 높았고 $25^{\circ}C$와 $37^{\circ}C$순으로 낮았으며 HBSS에서는 $4^{\circ}C$에서 높았고 $25^{\circ}C$와 $37^{\circ}C$에서 낮았다. 5. S회사와 P회사우유에서 치주인대세포의 생존율은 $4^{\circ}C$와 $25^{\circ}C$에서 높았고 $37^{\circ}C$에서 낮았다. 이상의 결과를 종합해볼 때 외상으로 인해 치아가 탈구되었을 때 탈구된 치아의 저장용액으로 HBSS용액이 추천되고 있으나 이 연구에서 $4^{\circ}C$와 $25^{\circ}C$ 우유에서 치주인대세포의 생존율이 높았으므로 사고 현장에서 쉽게 구할 수 있고 치주인대세포의 생활력 보존에도 유리한 낮은 온도의 우유에 탈구된 치아를 보존하는 방법도 좋을 것으로 생각된다.

• Journal of Periodontal and Implant Science
• /
• 제30권1호
• /
• pp.187-203
• /
• 2000

The precipitation of calcium phosphate on implant surface has been known to accelerate osseointegration and to enhance osseous adaptation. The present study was performed to examine whether the precipitation of calcium phosphate on Ti-6Al-4V alloy could be affected by the immersion in NaOH solution and heat treatment. Ti-6Al-4V alloy plates of $15{\times}3.5{\times}1mm$ in dimension were polished sequentially from #240 to #2,000 emery paper and one surface of each specimen was additionally polished with $0.1{\mu}m$ alumina paste. Polished specimens were soaked in various concentrations of NaOH solution(0.1, 1.0, 3.0, 5.0, 7.0, 10.0 M) at $60^{\circ}C$ for 24 hours for alkali treatment, and 5.0 M NaOH treated specimens were heated for 1 hour at each temperature of 400, 500, 600, 700, $800^{\circ}C$. After the alkali and heat treatments, specimens were soaked in the Hank's solution with pH 7.4 at $36.5^{\circ}C$ for 30days.The surface ingredient change of Ti-6Al-4V alloy was evaluated by thin-film X-ray diffractometer(TF-XRD) and the surface microstructure was observed by scanning electron microscope(SEM), and the elements of surface were analyzed by X-ray photoelectron spectroscopy(XPS). The results were obtained as follows ; 1. The precipitation of calcium phosphate on Ti-6Al-4V alloy was accelerated by the immersion in NaOH solution and heat treatment. 2. In Alkali treatment for the precipitation of calcium phosphate on Ti-6Al-4V alloy, the optimal concentration of NaOH solution was 5.0 M. 3. In heat treatment after alkali treatment in 5.0 M NaOH solution, the crystal formation on alloy surface was enhanced by increasing temperature. In heat treated alloys at $600^{\circ}C$, latticed structure and prominences of calcium phosphate layer were most dense. On heat treated alloy surface at the higher temperature(${\geq}700^{\circ}C$), main crystal form was titanium oxide rather than apatite. The above results suggested that the precipitation of calcium phosphate on the surface of Ti-6Al-4V alloy could be induced by alkali treatment in 5.0 M-NaOH solution and by heat treatment at $600^{\circ}C$.