• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.21-32
• /
• 2016

Studies have observed various phenomena regarding the effect of the interaction between type, price, and brand image of a product on consumers' purchase intent and product quality perception. Yet, few have studied the effect of the interaction between product type and manufacturing method on these factors. However, the advent of three-dimensional (3D) printers added a new manufacturing method, 3D printing, to the traditional methods of handicraft and automated machine-based production, and research is necessary since this new framework might affect consumers' purchase intent and product quality perception. Therefore, this study aimed to verify the effects of the interaction between product type and manufacturing method on purchase intent and product quality perception. To achieve this, in our experiment 1, we selected product types with different characteristics (drone vs. violin vs. cup), and measured whether consumers preferred different manufacturing methods for each product type. The results showed that consumers preferred the 3D printing method for technologically advanced products such as drones, the handmade method for violins, and the automated machine-based manufacturing method, which allows mass production, for cups. Experiment 2 attempted to verify the effects of the differences in manufacturing method preferences for each product type on consumers' purchase intent and product quality perception. Our findings are as follows: for drones, the purchase intent was highest when 3D printing was used; for violins, the purchase intent was highest when the violins were handmade; for cups, the purchase intent was highest when machine-based manufacturing was used. Moreover, whereas the product quality perception for drones did not differ across different manufacturing methods, consumers perceived that handmade violins had the highest quality and that cups manufactured with 3D printing had the lowest quality (the purchase intent for cups was also lowest when 3D printing was used). This study is anticipated to provide a wide range of implications in various areas, including consumer psychology, marketing, and advertising.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.337-343
• /
• 2012

The objective of this study was to characterize three different commercial (A, B and C) and two handmade (HM-AP, atmospheric pressure; HM-RP, reduced pressure) strawberry jams in relation to soluble solids, pH, total acid, total polyphenol, anthocyanin, color values, texture properties, and sensory evaluation. The soluble solid contents varied from 62.33 to 68.33 $^{\circ}Brix$, and the pH ranged from 3.59 to 3.70. The color L and a values were the highest in the HM-RP strawberry jam (p<0.05). The total polyphenol contents of commercial jams A, B, and C were 56.10, 97.59, and 105.85 mg GAE/100 g, respectively, and those of the HM-AP and HM-RP of handmade jams were 156.13 and 189.94 mg GAE/100 g. The anthocyanin contents of A, B, and C commercial jams were 1.51, 0.95, and 0.80 mg/100 g, respectively, and those of the HM-AP and HM-RP handmade jams were 2.64 and 9.16 mg/100 g. The phenolic contents of the HM-RP jam were significantly much higher than those of the other jams. The hardness ranged from $5.67{\times}10^3$ (HM-AP jam) to $41.91{\times}10^3$ (jam B) dyne/$cm^2$, the jelly strength ranged from 40.08 (HM-AP jam) to 180.33 (jam B) dyne, and the strength ranged from 83.84 (jam C) to 302.93 (jam B) g. The sensory evaluation of the color, flavor, sweetness, sourness, viscosity and overall acceptability of the HM-RP jam showed higher values than those of the other jams. Especially, the highest value of the color score was found in the HM-RP jam. The electon donating abilities of jams A, B, and C and of the HM-AP and HM-RP jams were 44.27, 41.70, 53.06, 69.08, and 73.21%, respectively. These results indicated that the HM-RP strawberry jam prepared with reduced pressure using micro-oxygen technology was a good source of phenolic compounds, total polyphenols and anthocyanin, and had a high level of antioxidant activity.

• Journal of the korean Society of Automotive Engineers
• /
• v.25 no.4
• /
• pp.74-82
• /
• 2003

Future emission legislation requirements especially the need for CO$_2$ reduction lead to more complex powertrain concepts with an increasing number of independent parameters to be calibrated. For gasoline engines concepts with variable valve timing, direct injection or variable charge motion are in development or already on production. Diesel engines with common rail systems offer a wide range of new injection strategies, the application of new exhaust aftertreatment systems leads to additional complexity. Furthermore a clear trend to highly sophisticated transmission concepts requires a perfect interaction of all powertrain components. While the higher complexity requires increasing test and development effort, the development duration is reduced significantly. Consequently, the potential of such systems cannot be fully utilised by traditional development and calibration approaches within the given timeframe. By introduction of intelligent methodologies f3r the calibration of modem powertrains the development becomes more efficient, faster and better in quality. However, even with standardised and automated calibration methods a differentiated brand-specific powertrain character has to be maintained comparable to a "handmade" calibration performed by highly experienced experts.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1534-1538
• /
• 2005

In this paper, we propose a method to detect contours of a face, eyes, and a mouth of a person in the color image in order to make an avatar automatically. First, we use the HSI color model to exclude the effect of various light conditions, and find skin regions in the input image by using the skin color defined on HS-plane. And then, we use deformable templates and genetic algorithm (GA) to detect contours of a face, eyes, and a mouth. Deformable templates consist of B-spline curves and control point vectors. Those represent various shapes of a face, eyes and a mouth. GA is a very useful search algorithm based on the principals of natural selection and genetics. Second, the avatar is automatically created by using GA-detected contours and Fuzzy C-Means clustering (FCM). FCM is used to reduce the number of face colors. In result, we could create avatars which look like handmade caricatures representing user's identity. Our approach differs from those generated by existing methods.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.110-115
• /
• 2005

This paper proposes the method to detect contours of a face, eyes and a mouth in a color image for making an avatar automatically. First, we use the HSI color model to exclude the effect of various light condition, and we find skin regions in an input image by using the skin color is defined on HS-plane. And then, we use deformable templates and Genetic Algorithm(GA) to detect contours of a face, eyes and a mouth. Deformable templates consist of B-spline curves and control point vectors. Those can represent various shape of a face, eyes and a mouth. And GA is very useful search procedure based on the mechanics of natural selection and natural genetics. Second, an avatar is created automatically by using contours and Fuzzy C-means clustering(FCM). FCM is used to reduce the number of face color As a result, we could create avatars like handmade caricatures which can represent the user's identity, differing from ones generated by the existing methods.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.134-143
• /
• 2002

According to the result of the experiment, except that Oebal Hanji making, which does not consider the fiber orientation, has a smaller difference between its strength of width and length direction than of Ssangbal Hanii making, there is not a significant difference between Oebal Hanji making and Ssangbal Hanji making. In addition, even though Oebal Hanji making produced indigenous technique is generally felt sturdy because its absolute strength is enhanced by applying fine materials and overlaying several sheets of paper, its relative strength, which is expressed in an index, is not far beyond that of Ssangbal Hanji making Study on the effect of Dochim revealed that Dochim improves remarkably folding endurance and enhances breaking length and the burst strength. Especially, Dochim increase tensile strength. It was also revealed that, indigenous Oebal Hanji making, the higher the number of sheets of paper overlaid is, the higher the tear strength is the increase relatively higher than those of other types of strength. Consequently, Dochim treatment greatly reinforces the imperfect strength of indigenous Hanji. We consider that if we apply Dochim treatment to Ssangbal Hanji making it may bring about abnormal imbalance of strength. We can benefit from the characteristic strength of Oebal Hanji making only when performing paper making and Dochim considering fiber orientation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.322-322
• /
• 2017

To avoid drought stress under rainfed upland conditions, it is important for rice to efficiently utilize water at shallow soil layers supplied by rainfall, and access to water retained in deer soil layers. The root developmental characteristics of rice, which play important role in the adaptability to drought conditions, vary depending on the variety. Moreover, water availability for plant differs depending on the soil types that have different physical properties such as water holding capacity, permeability, capillary force, penetration resistance, etc. In this study, we evaluated growth and yield responses of rice varieties to various soil water deficit conditions under three different soil types. The experiment was conducted in a plastic greenhouse at the Kenya Agricultural and Livestock Research Organization-Mwea from October 2016 to January 2017. Two upland varieties (NERICA 1 and 4) and one lowland variety (Komboka) were grown in handmade PVC pots (15.2 cm diameter and 85.0 cm height) filled with three different types of soil collected from major rice-growing areas of the country, namely black cotton (BC), red clay (RC), and sandy clay (SC). Three watering methods, 1) supplying water only from the soil surface (W1), 2) supplying water only from the bottom of the pots (W2), and 3) supplying water both from the soil surface and the bottom of pots (W3), were imposed from 40 days after sowing to maturity. Soil water content (SWC) at 20, 40, and 60 cm depths was measured regularly. At the harvesting stage, aboveground and root samples were collected to determine total dry weight (TDW), grain yield, and root length at 0-20, 20-40, 40-60, and 60-80 cm soil layers. Irrespective of the watering methods, the greatest root development was obtained in RC, while that in BC was less than other two soils. In BC, the degree of yield reduction under W1 was less than that in RC and SC, which could be attributed to the higher water holding capacity of BC. In RC, the growth and yield reduction observed in all varieties under W1 was attributed to the severe drought stress. On the other hand, under W2, SWC at the shallow soil depth in RC was maintained because of its higher capillary force compared with BC and SC. As the result, growths and yields in RC were not suppressed under W2. In SC, deep root development was not promoted by W2 irrespective of the varieties, which resulted in significant yield losses. Under W1, the rice growth and yield in SC was decreased although shallow root development was enhanced, and the stomatal conductance was maintained higher than RC. It was suspected that W1 caused nutrients leaching in SC because of its higher permeability. Under rainfed conditions, growth and yield of rice can be strongly affected by soil types because dynamics of soil water conditions change according to soil physical properties.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.3
• /
• pp.185-190
• /
• 2010

This study was focused to make a wooden plate that is engraved with writings or pictures on the medium density fiberboard (MDF), and then to produce a calligraphy-carving artwork by carbonization of the carved MDF. The external appearances and anatomical changes were investigated on the carbonized MDF and aesthetic characteristics was also discussed. No split and no twist were found after the carbonization (at $850^{\circ}C$) of the calligraphy-encarved MDF, shrinkages of the MDF were observed with portions of 21.8% in length, 18.8% in width and 43.5% in thickness, and 69.2% of weight loss with density decrease of 14.8% were observed as well. From the observation of the carbonized board by a scanning electron microscope, specific phenomena were found: the adhesives, surrounding the fiber's surface and pits, were carbonized, the woody fibers were changed smoothly, the pits were opened, the fiber' size was uniformized, and the organization was compacted. By the combination of handmade calligraphy-woodcarving and crack-free carbonizing methods, it was able to find a new method for manufacture carbonized calligraphy-woodcarving artwork. It is concluded that the calligraphy-woodcarving artwork using carbonized board can be a new access for the eco-friendly art that has the advantage of the functionality of charcoal and the aesthetic of calligraphy-woodcarving simultaneously.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.45-55
• /
• 2005

Purpose : To evaluate the usefulness of the handmade patient immobilization device and to report the clinical results of it. Materials and methods : We made two fusion images and analyzed those images. One image is made with diagnostic MR image and CT image, the other with therapeutic planning MR image and CT image. With open head holder, we measured the skin dose and attenuation dose. Also, we made the planning CT couch plate with acrylic plate and styrofoam and compared artifact. Results : We could get more accurate fusion image when we use MR head holder(within 2mm error). The skin dose was reduced 2 times and the attenuation dose was reduced more than $20\%$ when open head holder used. The planning CT couch plate was more convenient than conventional board and reduced artifact remarkably. Conclusion : We could verify the localization point in the MR image which is taken with MR head holder. So we could fuse the image more accurately. The same method could be applied to PET and US image, if the alike immobilization device used. With open head holder, the skin dose and the attenuation dose was reduced. And those above devices could substitute for expensive foreign device, if those are manufactured adequately.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.43-51
• /
• 2006

Purpose: To resolution of A hospital-handmade modification double tilt angle immobilization system (DTAB immobilization system) and to report the clinical results of it. Material and Methods: It was developed in conjunction with the breast board for patients unable to achieve and maintain the desired uncomfortable respiration and position of set-up needed in the treatment of RT (This custom design provides an alternative to accomplishing this desired head angle needed to relax position treatment area, realizing that the lenses totally protected eye-ball out) By using the angled breast board and SBDD(small bowel device), reproducibility of set-up and patient comfort were addressed throughout the simulation, computed tomography planning and treatment process. Results: Usually patients the error range-within 5 mm. When use of Aqua patients error range-within 3 mm. Conclusion: It was constructed in tandem with a unique custom-built double tilt angle board (DTAB). It was designed to eliminate clinical set-up problems with head immobilization and instability during treatment, thus providing for a more comfortable head rest for the patient.