• 한국항공운항학회지
• /
• 제27권4호
• /
• pp.65-72
• /
• 2019

There is concern about the increased risk of accidents from manual investments due to ground handling service operators, aging equipment and manpower shortages. Therefore, it is necessary to improve the quality of ground treatment services and safety management at the airport. Therefore, this study analyzed the domestic and overseas ground operation status and the license handling procedure of aircraft handling business. In addition, a case study on the evaluation system of international organizations examined the applicability of the certification body to the Korean situation. It is practical in that it provides policy implications for improving the quality of groundwork not covered in previous studies. This is expected to improve the constitution, improve quality, improve airport operations, and operate safely.

• 한국의료질향상학회지
• /
• 제29권2호
• /
• pp.85-93
• /
• 2023

Purpose: The predominant approach for mitigating inadequate sampling rates has primarily involved bolstering the volume of education. This study aimed to curtail inadequate sampling rates through the implementation of continuous quality improvement (CQI) activities, tailoring effective methods to the unique needs of each institution. Methods: We developed a sample handling guidebook and implemented QI activities to address this issue. Results: These measures resulted in a 4.7% decrease in inadequate sampling rates, concurrently improving knowledge of sample handling and overall nurse satisfaction. We addressed the root causes of inadequate sampling before laboratory pre-processing by: 1) focusing on systematic rather than erratic errors through CQI activities, 2) revising the sample handling guide, and 3) delivering face-to-face education based on the specific needs of the nursing department. These changes resulted in an additional 0.6% decrease in the inadequate sampling rate. Conclusion: This study demonstrates that the implementation of CQI activities based on evidence derived from a multifaceted causal analysis significantly reduced the inadequate sampling rate compared to previous studies.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.378-387
• /
• 2017

The combined model following control (MFC)-decoupler system is employed for a full authority fly-by-wire utility helicopter to enhance handling qualities. The MFC, which governs the vehicle to follow the prescribed model, is widely employed for modern helicopters. However, it may not be sufficient as helicopters often suffer significant cross coupling. The coupled responses between control axes of a helicopter increase the pilot's work load and may degrade handling qualities. As the decoupler is introduced to the MFC, the combined MFC-decoupler effectively solves the coupling problems and enhances handling qualities. The proposed system is verified via the handling qualities prediction using the mathematical dynamics model. The analysis results are confirmed through the piloted simulation.

• 한국항공우주학회지
• /
• 제44권6호
• /
• pp.530-536
• /
• 2016

고-신뢰도 모델을 이용한 조종성 평가 시뮬레이션 환경은 비행제어시스템의 설계/평가에 필수적으로 요구된다. 한국항공우주산업(주)에서는 소형민수헬기 핵심기술 개발과 관련하여 자동비행조종장치 소프트웨어 개발과제를 수행 중에 있으며 제어법칙 설계를 위한 비행동역학 모델 및 해석을 위해 상용 도구인 FLIGHTLAB을 이용하고 있다. 본 연구에서는 기존에 개발된 레거시 시뮬레이터를 FLIGHTLAB 모델과 연동하고 이를 조종성 평가에 활용한 내용을 다루었다. 본 논문에서는 외부 연동을 위한 FLIGHTLAB 모델의 설정, 연동 프로그램 개발 및 연동 방안에 대한 내용을 수록하였다. 또한 본 논문에서는 레거시 시뮬레이터와의 연동을 통해 ADS-33E-PRF의 호버 및 pirouette MTE 기동비행을 수행하고 평가 결과를 수록하였다.

• International Journal of Quality Innovation
• /
• 제5권2호
• /
• pp.70-78
• /
• 2004

Client-supplier collaboration in new product development (NPD) has been a strategy in response to fierce global competition. Traditionally, Hong Kong suppliers collaborate with worldwide clients through original equipment manufacturing (OEM) arrangement in which suppliers manufacture products according to clients' design. In recent years, a growing number of Hong Kong suppliers have transformed to original design manufacturing (ODM) in which they are assigned a design responsibility other than manufacturing products. The ODM arrangement necessitates a close interaction between clients and suppliers, which brings about intense conflict. Conflict has been recognized as an important factor affecting NPD performance including product quality. This paper studies the conflict handling practices of Hong Kong ODM suppliers based on 87 survey data. The results show that the suppliers frequently adopt effective conflict handling practices by which they can develop products of good quality through better design decisions. The results also suggest that the use of ineffective conflict handling behaviors, particularly avoiding, should be reduced for better product quality.

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.116-122
• /
• 2018

Due to the opening of Incheon International Airport Terminal 2, the operation range of ground operators is expanding and the workload is increased, which may cause a deterioration of the operation quality. Airline and airport corporations are concerned about safety delays as well as delays in flight due to delays in operations. Air traffic demand at Incheon International Airport is expected to increase steadily in the future. Therefore, this study intends to derive quality improvement plan by investigating the perception of stakeholders about the status of fishing service in order to improve service quality of Incheon airport ground handling company. The results of the analysis are expected to be used as basic data for improving quality of service.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권2호
• /
• pp.244-252
• /
• 1999

Intensive selection for muscle development and against fat deposition in pigs during the last 50 years has contributed to the increased incidence of porcine stress syndrome (PSS) and pale soft exudative pork (PSE). Genetics, nutrition and management, preslaughter animal handling, stunning, dehairing and carcass chilling influence the incidence and magnitude of the PSE condition. The normal incidence of PSE has been reported to range from 10 to 30%, but in some isolated instances is up to 60%. The elimination of halothane-positive pigs in breeding programs has reduced PSS and PSE. Further improvements in meat quality by terminal sire evaluation and selection can be achieved within halothane-negative populations because around 20% of the variation in meat color and water binding capacity seems to be genetically related. Pre-slaughter handling on the farm, during transit to the packing plant and at the packing plant can greatly influence the meat quality, contributing 10 to 25% of the variation. An effective stunning method, skinning instead of scalding/dehairing and rapid post-slaughter chilling further reduce the incidence of PSE pork. In addition to proper care and handling a carcass-merit based marketing system, that reflected the value differential between desirable and undesirable meat quality in the pricing system for pigs, would provide a great incentive to change pork production systems in order to improve meat quality, thus improving the image and usefulness of pork as food.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.591-596
• /
• 2008

The present study has been conducted to study the performance of dedicated outdoor air handling unit in central and personal air-conditioning. With conventional central and personal air-conditioning systems which are designed according to the maximum load, humidity increase above comfort level can not be avoided as the cooling load decreases. The adoption of dedicated outdoor air handling unit, however, can solve this problem. Moreover, the dedicated outdoor air handling unit has the characteristics of anti-bacteria due to dry coil, energy saving and good indoor air quality. During cooling seasons, dedicated outdoor air handling unit can save energy up to 30% than the conventional cooling+reheating system for controlling both temperature and humidity.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.102-109
• /
• 1998

As the fundamental study of an active suspension system, computer simulation is performed using a quarter model. Design data for the development of active suspension system are presented through performance estimation of active control laws in the time and frequency domain. The verification of compromise between ride quality and handling characteristics is carried out.

• 제어로봇시스템학회논문지
• /
• 제7권7호
• /
• pp.574-581
• /
• 2001

In this paper we design and evaluate the longitudinal nonlinear N(aub)z-CSAS(Command and Stability Augmentation System) flight control law in \"DMI(Dynamic Model Inversion)-method\" and classical \"Gain Scheduling-method\", respectively, to meet the handling quality requirements associated with push-over pull-up maneuver. It is told that the flight control law designed in \"DM-method\" is adequate to the full flight regime without gain scheduling and is efficient to produce the time response shape desired to the handling quality requirements. On the contrary, the flight control law designed in \"Gain Scheduling-method\" is easy to be implemented in flight control computer and insensitive to variation of the actuator model characteristics.n of the actuator model characteristics.