• Transactions of Materials Processing
• /
• v.15 no.6 s.87
• /
• pp.459-466
• /
• 2006

Trimming line design plays an important role in obtaining accurate edge profile after flanging. Compared to the traditional section-based method, simulation-based method can produce more accurate trimming line by considering deformation mechanics. Recently, the use of a finite element inverse method is proposed to obtain optimal trimming line. By analyzing flanging inversely from the final mesh after flanging, trimming line can be obtained from initial mesh on the drawing die surface. Initial guess generation fer finite element inverse method is obtained by developing the final mesh onto drawing tool mesh. Incremental development method is adopted to handle irregular mesh with various size and undercut. In this study, improved incremental development algorithm to handle complex shape is suggested. When developing the final mesh layer by layer, the algorithm which can define the development sequence and the position of developing nodes is thoroughly described. Flanging of front fender is analyzed to demonstrate the effectiveness of the present method. By using section-based trimming line and simulation-based trimming line, incremental finite element simulations are carried out. In comparison with experiment, it is clearly shown that the present method yields more accurate edge profile than section-based method.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.134-141
• /
• 2006

Surface deflections have a great effect on the external appearance of automobiles. Usually, they are occurred on large flat panels containing sudden shape changes and of very small size about $\pm$30$\sim$300$\mu$m. Since the current numerical method is not sufficient for predicting these defects, the correction of these defects still depends on trial and error, which requires a great deal of time and expense. Consequently, developing the numerical method to predict and prevent these defects is very important far improving cosmetic surface qualities. In this study, an evaluation system that can analyze surface deflections using numerical simulation and a visualization system are reported. To calculate the surface deflections numerically, robust algorithms and simulation methodologies are suggested and to visualize them quantitatively, the curvature variation algorithm is proposed. To verify the developed systems, the experimental die of the handle portion of exterior door is analyzed. The results showed that the experimental and simulational visualization are in good agreement. Compensation methods to correct the surface deflections are also tested. The evaluation system proposed in this paper could be used to predict and minimize the occurrence of surface deflections in die manufacturing.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.11-19
• /
• 2015

Due to recent development in mobile devices, the mobile device utilization and many related applications have been increasing. Most of initial applications on mobile devices just showed simple information, but now they processes huge data. However, smart devices have certain limitations in processing massive data. Especially, if the size of data increases, the speed of data processing adversely decreases, so the performance of programs also decreases. If hardware specification of the mobile devices is not enough to handle it, response time will be drastically delayed. To overcome these drawbacks, most of application running on mobile devices communicate with their servers to manage data. XML is a proper language for data communication to send and receive data between servers and mobile devices, because it defines rules of document's format and it is a textual data format and small-sized language. However, mobile devices have limitation such as memory, CPU and wireless network to process huge data and XML also takes a lot of time to communicate with servers and devices and handle data, so it could be overhead in service time. Binary XML is an alternative of performance improvement in data processing, which has XML's benefits and minimizes the XML size by binary coding. However, most of binaryXML which are used on applications don't fit on mobile applications. In this paper, we surveyed many kinds of binaryXML, compared merits and demerits to find a binaryXML for mobile applications. We propose how to use binary XML and implemented an electronic attendance system using binary XML to overcome the limitation of XML and to reduce the load of data communications between servers and devices.

• MALSORI
• /
• no.52
• /
• pp.111-120
• /
• 2004

This paper focuses on the DSP implementation of an HMM-based speech recognizer that can handle several hundred words of vocabulary size as well as speaker independency. First, we develop an HMM-based speech recognition system on the PC that operates on the frame basis with parallel processing of feature extraction and Viterbi decoding to make the processing delay as small as possible. Many techniques such as linear discriminant analysis, state-based Gaussian selection, and phonetic tied mixture model are employed for reduction of computational burden and memory size. The system is then properly optimized and compiled on the TMS320C6711 DSP for real-time operation. The implemented system uses 486kbytes of memory for data and acoustic models, and 24.5 kbytes for program code. Maximum required time of 29.2 ms for processing a frame of 32 ms of speech validates real-time operation of the implemented system.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1214-1221
• /
• 2011

It is an well-known fact that dynamic properties should be considered in design and maintenance of civil structures undergoing dynamic force such as rail track. For designing of the rail tack structures, dynamic properties of track bed soil such as shear modulus (G) and damping coefficients(D) obtained in small to medium range of shear strain must be known. In general, small size sample of D=5 cm and H=10cm has been used mostly for test convenience. However, ratio of largest particle diameter of the soil to sample diameter is very important and affects to the values of dynamic soil properties in track bed. In this study, an RC/TS test apparatus was built and was run for testing a medium size soil sample that can handle with compacted soil sample up to 10 cm diameter and 20 cm height.

• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.189-196
• /
• 2015

In this paper, we present a rotating auto-zeroing offset cancellation technique, which can improve the performance of touch screen sensing circuits. Our target touch screen detection method employs multiple continuous sine waves to achieve a high speed for large touch screens. While conventional auto-zeroing schemes cannot handle such continuous signals properly, the proposed scheme does not suffer from switching noise and provides effective offset cancellation for continuous signals. Experimental results show that the proposed technique improves the signal-to-noise ratio by 14 dB compared to a conventional offset cancellation scheme. For the realistic simulation results, we used Cadence SPECTRE with an accurate TSP model and noise source. We also applied an asymmetric device size (10% MOS size mismatch) to the OP Amp design in order to measure the effectiveness of offset cancellation. We implemented the proposed circuit as part of a touch screen controller system-on-chip by using a Magnachip/SK Hynix 0.18-µm complementary metal-oxide semiconductor (CMOS) process.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.75-80
• /
• 2017

Nowadays, smart phone is being popularly used for communication, entertainment, and information retrieval. While demands on video traffic over mobile networks increases sharply, the wireless link capacity is often limited to fully support the traffic demand. Therefore, the size of video data needs to be reduced to provide high quality video with limited capacity. To handle this issue, we propose a video editing system using the ffmpeg library. The proposed system can provide a high quality video with a relatively small data size, thereby facilitating the mobile streaming services and live-video games.

• The Journal of Information Technology
• /
• v.5 no.2
• /
• pp.27-34
• /
• 2002

The KVM garbage collector implemented in CLDC was generally based on the simple mark-sweep algorithm, but it is difficult to handle objects of varying size without fragmentation of the available memory. In this paper, we have designed and implemented a memory allocator based on the mark-sweep algorithm that minimizes the fragmentation by the method that determines the allocation position of free-space list according to object size. The experimental result shows that our algorithm reduce the fragmentation and improve the execution time than the existing algorithm.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.217-223
• /
• 2010

The research proposes the complementary methodology using integrated hypothesis testing and confidence interval models that can be identified the statistical difference and practical equivalence. The models developed in this study can be used in the quality improvement processes such as QC story 15 steps. For the expressions of CI4LSD(Confidence Interval for Least Significant Difference) and CI4TOST(Confidence Interval for Two One-Sided Tests) are simple, quality practioners can efficiently handle them. CI4TOST models as a complement can be applied when CI4LSD models are influenced by sample size and precision.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.726-729
• /
• 2013

For secure multimedia communications, existing encryption techniques use an online session key for the key exchange, for which key size is limited to less than 10 digits to accommodate the latency condition caused by user devices only being able to handle low computational loads. This condition results in poor security of recorded encrypted data. In this letter, we propose a packet key scheme that encrypts real-time packets using a different key per packet for multimedia applications. Therefore, a key of a relatively small size can provide after-transmission confidentiality to data of a real-time session.