• Journal of the Korean Society of Clothing and Textiles
• /
• v.8 no.2
• /
• pp.47-57
• /
• 1984

Effect on the hand value and mechanical properties of blend ratio and weight had been investigated Oil summer suits for men. Relation between the mechanical properties and the deformation in behavior was also studied. The mechanical properties which influence the hand values and total hand value had been discussed and the relation between mechanical properties, hand values and fabric count had, too. As result, the following conclusions had been obtained. 1) The values of tensile properties increased with the increase of blend ratio of wool. The values of surface properties increased according to the increase of blend ratio of polyester. 2HB(bending properties) of polyester/wool blend showed higher value than that of $100\%$ wool, but there was no change in the shearing properties according to the blend ratio. The values of stiffness, crispness and anti-drape stiffness of blend fabric showed higher values than those of $100\%$ wool fabric. The value of fullness (including softness) of blend fabric showed lower value than that of $100\%$ wool fabric. 2) The correlation between hand values and mechanical properties showed following order. in stiffness : bending properties>surface properties in crispness: surface properties>bending properties in anti-drape stiffness: bending properties>surface properties>shearing properties.

• Korean Journal of Veterinary Research
• /
• v.41 no.4
• /
• pp.565-570
• /
• 2001

The diagnosis of swine sarcoptic mange (Sarcoptes scabiei var. suis) was investigated by ELISA in order to replace current diagnostic methods such as skin scraping, scratching index, or lesion score of dermatitis. The current methods need many efforts and much times and cost much. They can not handle many samples simultaneously. Therefore, in this research we developed ELISA that can handle many samples at a time. The antigens of swine sarcoptic mite were isolated and examined by 12.5% SDS-PAGE and silver staining. The antigenicity of antigen was confirmed by Western blotting using the swine from the artificailly-infested swine with swine sarcoptic mite. The optical density (OD) values of the artificailly-infested positive sera and the naturally-infested positive sera of sows were measured and read in order to confirm the stability of antigens, the reproducibility and validity (sensitivity and specificity) of the manufactured ELISA of swine sarcoptic antigens. In above results, the developed ELISA would be possible to use the diagnostic tool of sarcoptic mange if OD values of piglets, fattening pigs and sows are interpreted reasonably and classified as mange-free and infested.

• Journal of Biosystems Engineering
• /
• v.31 no.6 s.119
• /
• pp.500-505
• /
• 2006

Jujube is one of korean most favorite fruits. Harvesting operations of the jujube farming, however, completely depend on hand labor. Especially, collecting operation requires about three times of hand labor compared with separate operation by impacting or shaking of twigs in the hand-harvesting system of jujube fruits. Consequently, jujube farmers sincerely demand the mechanization of the collecting operation of jujube fruits in the harvesting operation. A new collecting system was designed and constructed five parts-collecting pad, guide ring system, sorting system, frame with driving system, and handle with operation levers, which performed collecting operation of jujube fruits without missing fruits in five part functions, however, an extra future more deliberate study would need how to handle conveniently the collecting pad of the prototype in the narrow space of row of the jujube farm.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.5 s.72
• /
• pp.57-62
• /
• 2006

The most important thing in acontainer terminal is to handle the cargo effectively in the limited time available. To achieve this objective, many strategies have been introduced and applied. To create an automated container terminal, it is necessary for the cargo handling equipment to be equipped with more intelligent control systems. From the middle of the 1990's, automated rail-mounted gantry cranes (RMGC) and rubber-tired gantry cranes (RTG) have been widely used to handle containers in yards. Recently, many pieces of equipment, like CCD cameras and sensors, have beenmounted in these cranes to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes, which allow for more effective cargo handling in yards. For this purpose, the modeling, tracking control, anti-sway system design, skew motion suppressing, and complicated motion control and suppressing problems must be considered. Especially, in this paper, the system modeling and a new tracking control approach are discussed, and an experimental study is performed based on a two-degree-of-freedom (2DOF) servosystem design.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.60-66
• /
• 2014

In case of DC railway, value of ESS(Energy Storage System) is already approved. Whereas AC railway system, there are a lot of differences such as system design and operation pattern. Therefore there is doubt about AC ESS usefulness. Especially, regenerative energy can return to the source. So in case of AC 25kV system, it is necessary to consider different operation algorithm compare to DC railway system. In this paper ESS which is installed in AC high-speed railway was introduced. Power consumption pattern of High speed trains were analyzed, proper storage material was reviewed and operation algorithm was suggested. Super capacitor and Battery was used with hybrid type. Super capacitor was used to handle short term energy movement because of its prompt response and battery was used to handle long term energy movement because of its high energy density. Also in case of operation algorithm, phase control method was upgraded compare to voltage magnitude detection method.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3019-3028
• /
• 2000

One of the most frequently used spline scheme in CAD and graphics package is Bezier curve. Although simple and easy to implement, it supports diverse kinds of curves and surfaces. In view of the design convenience, the main advantage of the Bezier curves is that they observe user-specified slope conditions at both endpoints while maintaining smoothness. This paper expands the advantage by deriving equations for generalized Bezier curves, and applying the equation to observe additional slope condition at midpoint. This is possible by decomposing and analyzing the user-specified midpoint slope, and reflecting the result back into the Bezier basis matrix in parametric form. Consequently, users can control the curve shapes not only by the endpoint slope handles but also at the midpoint slope handle, which helps them to be able to apply more accurate control over the conventional Bezier curve shapes.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.57
• /
• pp.3-34
• /
• 2013

In the international sales contract, long-term contracts often face hardship in fulfilling the original contract terms by relevant parties due to rapid change and uncertainty of political and economic circumstance. In this case, party who faces hardship of fulfillment terminates contract or demands adaptation to contract condition but if opponent doesn't accept this, it proceeds to commercial dispute needing legal interpretation. Generally it is wise to set forth governing law in contract between parties in the case of international contract, for legal stability. One of universal governing law which relevant parties select by agreement to solve economical hardship of fulfillment is PICC. PICC defines the hardship in detail for renegotiation on following hardship of fulfillment unexpected. In the case of failing renegotiation, Court(arbitral tribunal) conducts termination to contract or adaptation to contract condition through arbitration or mediation. In conclusion, when signing international long-term contract, it is desirous to handle dispute effectively by inserting provisions which can deal with economical hardship in contract or defining PICC as governing law in the case of hardship incurred. It is because it is realistic to handle dispute smoothly to the extent that both parties can be satisfied in the case of hardship incurred, though international contract should be fulfilled.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.155-160
• /
• 2011

IPTV functions not only as media player that does play the broadcasting industry's contents, also as the gateway is guaranteed of QoS(Quality of Service). This is for free contents-sharing that device stores contents using home network circumstance, and is for watching with seamless network service. Also this have required next QoS model that can handle stably as it may contain more data of the small computing device in next generation home system. We need ubiquitous-oriented QoS's design and development project that focuses on internal and external media service, not the existing QoS nor one-sided QoS of media sevice industry. This paper focuses on network module development. This supports IPTV in media industry and two-way capability of QoS highlighting multimedia service in network industry. In additional, this can handle stably the multiplex signal of USN/RFID as the representative ubiquitous and home network that services high-speed wire and wireless interface, and support the seamless u-QoS.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.6
• /
• pp.555-561
• /
• 2010

Predicted noise level has been used to assess the annoyance response since noise map was generalized and being the normal method to assess the environmental noise. Unfortunately using predicted noise level to derive the annoyance prediction curve caused some problems. The data have to be grouped manually to use the annoyance prediction curve. The aim of this paper is to propose the method to handle the predicted noise level and the survey data for annoyance prediction curve. This paper used the percentage of persons annoyed(%A) and the percentage of persons highly annoyed as the descriptor of noise annoyance in a population. The logistic regression method was used for deriving annoyance prediction curve. It is concluded that the method of dichotomizing data and logistic regression was suitable to handle the predicted noise level and survey data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5512-5526
• /
• 2019

In sports video games, especially ball games, motion capture techniques are used to reproduce the ball-driven performances. The amount of motion data needed to create different situations in which athletes exchange balls is bound to increase exponentially with resolution. This paper proposes how avatars in virtual worlds can not only imitate professional athletes in ball games, but also create and edit their actions effectively. First, various ball-handling movements are recorded using motion sensors. We do not really have to control an actual ball; imitating the motions is enough. Next, motion is created by specifying what to pass the ball through, and then making motion to handle the ball in front of the motion sensor. The ball's occupant then passes the ball to the user-specified target through a motion that imitates the user's, and the process is repeated. The method proposed can be used as a convenient user interface for motion based games for players who handle balls.