• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.339-342
• /
• 2005

In this paper, a hand-operating method (tiled test method) of the wool-blending sample is made out, and make use of the method, the test of wool-blending bundle in different blending ratio is accomplished. According to the test data, the synthesis method of the stretch curve is worked out and the synthesis software for the typical stretch curve of wool-blending bundle is designed. Through laboratory hand-operating method, the blending fasciculus applying to fiber bundle test can be obtained in a short time. Calculation for sampling is accomplished in the article. We bring up 9 new signs to describe the characteristics of the curve behind peak for the first time: elongation behind peak (HE), elongation percentage behind peak (HEP), relative elongation rate behind peak (RHE), total break work $(W_a)$, break work behind peak (HW), break work coefficient behind peak (HWC), elongation percentage of half-load behind peak (HEL), load percentage of half-elongation behind peak (HLE), break efficiency behind peak (HEC).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1424-1434
• /
• 2009

DNA computing-inspired pattern classification based on the hypernetwork model is a novel approach to pattern classification problems. The hypernetwork model has been shown to be a powerful tool for multi-class data analysis. However, the ordinary hypernetwork model has limitations, such as operating sequentially only. In this paper, we propose a efficient implementing method of DNA computing-inspired pattern classifier using GPU. We show simulation results of multi-class pattern classification from hand-written digit data, DNA microarray data and 8 category scene data for performance evaluation. and we also compare of operation time of the proposed DNA computing-inspired pattern classifier on each operating environments such as CPU and GPU. Experiment results show competitive diagnosis results over other conventional machine learning algorithms. We could confirm the proposed DNA computing-inspired pattern classifier, designed on GPU using CUDA platform, which is suitable for multi-class data classification. And its operating speed is fast enough to comply point-of-care diagnostic purpose and real-time scene categorization and hand-written digit data classification.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.7
• /
• pp.1-8
• /
• 1998

In this paper, the radiation characteristics of a bar-type tranceiver are analyzed by using FDTD method and the effectiveness of the analysis method is verified by comparing the calculated data with experimental data. The effects of human head and hand on the radiation characteristics of fold-type transceiver are analyzed. In order to observe the effects of human head and hand on the input impedance and far-field radiation pattern, a fold-type transceiver with .lambda./4 monopole antenna wrapped by human hand operating in the proximity of hea dis modeled an analyzed.

• Journal of Sasang Constitutional Medicine
• /
• v.19 no.1
• /
• pp.60-77
• /
• 2007

1. Objectives This is the comparative study with hand-operated measurement method and Automatic measurement method, in order to convert the automatic measurement method. 2. Methods We measured the body of patients(hand-operated Width 5 Places and hand-operated circumference 8 place,Automatic Width 5 and automatic circumference 8 place by 3D body measuring instrument) and analyzed the anthropometric data divding into sex&age. 362 patient's data are used in the analysis. 3. Results and Conclusions 1) 1th circumference variable which standing was not a sasang constitutional difference. 2) Diagnostic accuracy rate of the body measurement was 50-80%. 3) Diagnostic accuracy rate of man is higher than Diagnostic accuracy rate of women 4) Diagnostic accuracy rate of Automatic & hand-operated measuring was not a big difference.

• Journal of Korean Academy of Nursing
• /
• v.34 no.6
• /
• pp.924-933
• /
• 2004

Purpose: This study was to examine the effects of hand massage and hand holding as nursing interventions on the anxiety in patients with local infiltration anesthesia. Method: The design of this study was a nonequivalent, control group, non- synchronized design. The subjects of this study consisted of 15 patients for the hand massage group, 15 patients for the hand holding group and 17 patients for the control group awaiting surgery in the operation room of a general hospitalin Daegu. As an experimental treatment, hand massage was carried out by the Hand Massage Protocol developed by Snyder(1995) and interpreted by Cho(1998) and hand holding developed by Cho(1998). The data were analyzed by SPSS/WIN, T-test, ANOVA, Cronbach's a, and the Scheffe test. Results: The hand massage group and hand holding group were more effective than the control group in reducing anxiety, VAS score, systolic blood pressure and pulse rate. Conclusion: Hand massage and hand holding are effective nursing interventions that alleviates the psychological and physiological anxiety of patients with local infiltration anesthesia. In particular, the simple contact of hand holding is regarded as an effective and easily accessible nursing intervention in the operating room.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.6
• /
• pp.688-694
• /
• 2002

Several methods were developed for on-line measuring oil consumption in gasoline engine using an oil consumption meter. The oil consumption meter indicates the oil quantity by real-time-measuring the oil level in the sump. In order to measure the oil consumption, the oil consumption meter proposed in this paper requires shorter time, less additional procedures, and shows better results than the traditional drain method. Under steady-state engine-operating conditions, the results obtained through the regression or the difference method show an good agreement with those through the drain method. Under transient engine-operating conditions, on the other hand, good results can be obtained through the reference method.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.163-168
• /
• 2011

A Fabry-Perot cavity (FPC) antenna producing both high-gain and circularly-polarized (CP) behavior is proposed. To increase antenna gain and obtain CP characteristics, a superstrate composed of square patches with a pair of truncated corners is placed above the linearly polarized patch antenna with an approximately half-wavelength distance from the ground plane at the operating frequency. The proposed antenna has the advantages of high gain, a simple design, and an excellent boresight axial ratio over the operating frequency bandwidth. Moreover, used in an FPC antenna, the proposed superstrate converts a linear polarization produced by a patch antenna into a circular polarization. In addition, the cavity antenna produces left-hand circular-polarization and right-hand circular-polarization when a patch antenna inside the cavity generates x-direction and y-direction polarization, respectively. The measured and simulated results verify the performance of the antenna.

• Journal of the Korean Society of Combustion
• /
• v.16 no.3
• /
• pp.1-11
• /
• 2011

The main objective of this paper is to investigate characteristic of steam reformer at various geometries and operating conditions. In this paper, the steam reforming is studied by a numerical method and three dimensional simulations were used for effective analytical study. User - Defined Function (UDF) was used to simultaneously calculate reforming and combustion reaction. And the numerical model is validated with experimental results at the same operating conditions. In order to understand the relationship between operating conditions such as gas hourly space velocity(GHSV), mass flow rate of combustor inlet, various numerical investigations are carries out for various geometries. Numerical results show that cylindrical geometry is more effective than rectangular geometry for heat transfer to reactors and reforming efficiency. As mass flow rate of combustor inlet increase, reaction occurs more faster and temperature increase with each geometry. On the other hand, reaction and hydrogen conversion decrease as mass flow rate of reactor decreases.

• Korean Journal of Occupational Health Nursing
• /
• v.14 no.2
• /
• pp.164-170
• /
• 2005

Purpose: The present study attempted to find subjective musculoskeletal symptoms of operating room nurses (OR nurses) and then to use them as basic data for prevention and management of musculoskeletal symptoms of OR nurses. Method: This study was an exploratory research, and data were collected from OR nurses working in 8 polyclinics in Korea from July 26 to August 19, 2004, using a self-report questionnaire. The questionnaire contains items concerned with subjective musculoskeletal symptoms include ones with the presence of symptoms and with the degree of discomfort, in the joints such as neck, shoulder, arm/elbow, hand/wrist/finger and waist. For data collection, the aim of the study was explained to the operating room managers to obtain their help, and these questionnaires were sent to hospitals, and were retrieved by post. 271(90.3%) questionnaires were returned among those sent to 300 nurses. 249 questionnaires excluding 22 insufficient ones such as no response were used for data analysis. Data were analyzed using SPSS WIN 12.0. Subjective musculoskeletal symptoms were analyzed in the number and percentage. Result: 187(75.1%) nurses said they 'had' subjective musculoskeletal symptoms and 62 (24.9%) said they had 'nothing'. 130(52.2%), 125 (50.2%), 113 (45.4%), 86(34.5%), and 42 (16.9%) nurses had subjective musculoskeletal symptoms in waist, shoulder, hand/wrist/finger, neck, and arm/elbow, respectively. 51(27.3%) and 136 (72.7%) nurses complained of the pain in one site, and in two or more sites, respectively. In particular, 51% and 47.4% nurses said that they were 'discomforted' due to the pain in waist and in shoulder, respectively. Conclusion: Subjective musculoskeletal symptoms which OR nurses complained of were significant. This may cause difficulty in nursing tasks in the operating room. So various arrangements have to be made for OR nurse with subjective musculoskeletal symptoms at an early stage.

• Journal of Information Technology Applications and Management
• /
• v.19 no.2
• /
• pp.217-231
• /
• 2012

In the past, companies should make enormous facility investment and acquire a right to do business in order to join communication markets, but now they can do business without important facilities, such as communication networks. Such a movement to ease regulations about companies which want to newly join the communication industry is expected not only to change a competition frame of the mobile communication market but also to greatly affect the entire communication industry. Through this study aiming to look into a way to calculate a reasonable wholesale price related to the government's introduction of the Mobile Virtual Network Operator (MVNO) system, I came up with a following result. I applied the operating profit percentage and the ratio of operating gain to cost to the cost plus model and retail minus model, respectively, to calculate the wholesale price and found that when I calculated with the cost plus model applying the operating profit percentage, I could get the highest wholesale price. On the other hand, I got the lowest wholesale price with the retail minus model by applying the operating profit percentage. Division of expenses and calculation of profit percentage are important factors in calculating the wholesale price and such results are expected to help accurate calculation of the MVNO wholesale price.