• Journal of Fashion Business
• /
• v.2 no.2
• /
• pp.77-84
• /
• 1998

As a result of surveying the process for sewing, the problems involving the outlook of sewn apparels were error off the standard dimensions and uneven sizes, which verifies the need for urgent technological guidance and development. On the other hand, the majority of the businesses were operating their sewing machines at the speed of 2,000 rpm or higher. Such a conventional working method may not well reflect the properties of the stretch fabrics, causing poorer quality products. Moreover, most of the businesses were using the ball-point needles which should be replaced with appropriate ones for stretch fabric. The types of feed dog which were used most were Drop feed, Union feed, Confound feed, Differential feed in their oder. Anyway, the automatized dog should urgently replace these inefficient ones for stretch fabric. Meanwhile, the types of presser foot which were used most were Plain foot, Teflon foot, Roller foot, Ring foot in their order, which also necessitates their replacement which Teflon foot. 2. As a result of surveying the process for finishing and inspection, while the causes scores less than 3 points, those due to pressers scored more than 3 points. This results suggests that a technological guidance is needed for the pressing work. Lastly, the causes of defect due to poor outlook attributable to such notions as button or zipper and those due to the uneven sizes scored more than 3 points, which suggests that the entire of needle works should be reformed through scientific research and technological guidance.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.2
• /
• pp.157-164
• /
• 2011

This work is devoted to the technique application of lock-in infrared Thermography in the shipbuilding and ocean engineering industry. For this purpose, an exploratory study to find the optimized test conditions is carried out by the design of experiments. It has been confirmed to be useful method that the phase contrast images were quantified by a reference image and weighted by defect hole size. Illuminated optical intensity of lower or medium strength give a good result for getting a phase contrast image. In order to get a good phase contrast image, lock-in frequency factors should be high in proportion to the illuminated optical intensity. The integration time of infrared camera should have been inversely proportional to the optical intensity. The other hand, the difference of specimen materials gave a slightly biased results not being discriminative reasoning.

• Archives of Reconstructive Microsurgery
• /
• v.16 no.1
• /
• pp.39-47
• /
• 2007

With the advent of microsurgery, perforator free flap is nowadays considered the first choice for reconstruction of the extensive defect of the extremities because of their moderate thickness. Among them, anterior (anterolateral and anteromedial) thigh perforator free flaps provide the first choice for reconstruction of various soft tissue defects of the extremities with many advantage such as its large, uniform thickness, long vascular pedicle with proper vessel size and minimal donor site morbidity. But, it has still some criticism of unreliable perforators which makes us very careful in elevating the flap. Between March of 2006 and February of 2007, we treated 7 patients of soft tissue defects in the hand and lower extremities with anterior thigh perforator free flap at Hallym and DongGuk University Hospital. We performed 6 anterolateral thigh perforator free flaps based on the descending branch of lateral circumflex femoral artery (LCFA) and 1 anteromedial thigh perforator free flap based on the innominate branch of the LCFA. While approaching for the anterolateral thigh free flap, we happen to meet the cases which we should change into the anteromedial thigh free flap uneventfully on the operating field. In contrast to the original design of anterolateral thigh free flap, we had to harvest the anteromedial thigh perforator free flap in 1 case. All the anterior thigh perforator free flaps survived completely except 1 case of partial necrosis due to venous congestion. Donor sites were closed primarily and healed uneventfully within 2 weeks. Patients were satisfied with the functionally and aesthetically acceptable results. Although doppler sonography is strongly recommended preoperatively in planning the anterior thigh perforator free flaps, we should always remember the variation in vascular anatomy and be ready to change the flap choice from the anterolateral to anteromedial intraoperatively. we provide a review of the literature and present our series of anterior thigh perforator free flaps for reconstruction of the extremities.

• Clinical and Experimental Pediatrics
• /
• v.52 no.12
• /
• pp.1388-1391
• /
• 2009

Poland syndrome is characterized by unilateral absence or hypoplasia of the pectoralis muscle and variable degree of ipsilateral hand anomalies. Mobius syndrome is a congenital neurological disorder characterized by complete or partial facial paralysis. Although the pathogeneses of these diseases are not well-characterized, diminished blood flow to the affected side is thought to play a role. A male infant weighing 2.670 g was born at 38+3 weeks of gestation with left facial paralysis, left chest wall defect with dextrocardia, and symbrachydactyly between the second and third fingers. The combination of Poland-Mobius syndrome is rare, and only 2 cases associated with dextrocardia have been reported worldwide. Here, we report the first case of Poland-Mobius syndrome associated with dextrocardia in Korea.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.69-80
• /
• 2017

In or To use, manage, and preserve sustainable water resources for the current and future generations amid the threat of abnormal climate, it is necessary to establish a smart water grid system, the next-generation intelligent water management system. In this study, sensors, which make use of the five senses to watch, listen, and detect machine vibration, bearing temperature, machine operation sounds, current, voltage, and other symptoms that cannot be verified when the irrigation facilities are running, are used to establish various decision-making criteria appropriate to on-site situations. Based on such criteria, the unmanned conditions in the facilities were verified and analyzed. Existing technologies require on-site workers to check any defects caused by overloading of machines, which is the biggest constraining factor in the application of an unmanned control system for irrigation facilities. The new technology proposed in this study, on the other hand, allows for the unmanned analysis of the existence of machine vibration. This controls the decision-making process of any defect based on the analysis results, and necessary measures are taken automatically, resulting in improved reliability of the unmanned automation.

• Korean Institute of Interior Design Journal
• /
• v.21 no.2
• /
• pp.174-185
• /
• 2012

The purpose of this study is to suggest planning strategy of tenant mix for UEC based on the final result of tenant mix analysis of five different research cases. The following is the comprehensive explanation about the result of tenant mix planning strategy for UEC currently in operation and when planning a new facility. First, overall research cases in this study show the tendency of following an old tradition, which stresses direct sales focusing on retail and dining adaptation. In order to compensate the defect, it is suggested to adopt new type of tenants with the functional mix of retail and dining with entertainment rather than decreasing the proportion of retail and dining tenant and increasing it of entertainment tenant. Second, the floorplan of UEC should adopt racetrack or circuit form that can stimulate shoppers' circular movement so to expose them to as much tenants as possible. Service consumption mode related tenants are required to place on the side or the edge of UEC, while retail consumption mode related tenants should be planned in the center. Among dining consumption mode related tenants, impulse dining tenants like a coffee shop should be placed at the turning point or at the end of the pathway, destination tenants like a restaurant and a food court, on the other hand, is needed to be placed in the center of the space. In case of Entertainment related tenants, destination tenants like bookstore or multiplex should also be placed at the end of the pathway, and on the way to those tenants, it is required to place general tenants that can share target customers with them. On the contrary, game center or record shop like tenants that can stimulate impulse sales should be placed on the visitor's main move or near the other destination tenants. Third, anchor tenants play an important role in gathering people to the UEC, and then induce them to visit the other tenants that are located near the anchors. Thus it is suggested to plan to place general tenants on the same floor as anchor tenants are placed so they can share the characteristics of target customers which create synergy effect.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.471-476
• /
• 2019

Additively manufactured metallic components contain high surface roughness values, which lead to unsatisfactory high cycle fatigue resistance. In this study, high cycle fatigue properties of selective laser melted Ti-6Al-4V alloy are investigated and the effect of dry-electropolishing, which does not cause weight loss, on the fatigue resistance is also examined. To reduce the internal defect in the as-built Ti-6Al-4V, first, hot isostatic pressing (HIP) is conducted. Then, to improve the mechanical properties, solution treatment and aging are also implemented. Selective laser melting (SLM)-built Ti64 shows a primary α and secondary α+β lamellar structure. The sizes of secondary α and β are approximately 2 ㎛ and 100 nm, respectively. On the other hand, surface roughness Ra values of before and after dry-electropolishing are 6.21 ㎛ and 3.15 ㎛, respectively. This means that dry-electropolishing is effective in decreasing the surface roughness of selective laser melted Ti-6Al-4V alloy. The comparison of high cycle fatigue properties between before and after dry-electropolished samples shows that reduced surface roughness improves the fatigue limit from 150 MPa to 170 MPa. Correlations between surface roughness and high cycle fatigue properties are also discussed based on these findings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6047-6052
• /
• 2013

A cosmetic manufacturing process requires a mold that is inevitable for mass production. Cosmetic containers are one of major factors affecting the customer's purchase decision. In addition, the manufacturing cost in cosmetic container comprises a large portion of the entire product cost. Therefore, a mold satisfying the economical feasibility, aesthetics and functionality is necessary. Among the cosmetic containers, square shape containers have a tendency of having a short shot defect product. The square shaped cosmetic containers are mostly produced as a side gate shape on the two-plate molds. On the other hand, there are two disadvantages, such as gate trace and post processing requirement. The overlap-gateproposed in this study has the characteristics of intaglio gate cutting and no need for post processing. The delivery system of the overlap gate was simulated and compared with the side gate via Moldflow. The improvement in flow, frozen rate, density, and Air trap was confirmed. Based on the simulation results, the mold and performed injection molding was fabricated. In this study, the possibility of the mass production of high aesthetic and functionality cosmetic containers was verified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2037-2042
• /
• 2017

The manufacturing facility is generally operated by a pre-set program under the existing factory automation system. On the other hand, the manufacturing facility must decide how to operate autonomously in Industry 4.0. Determining the operation mode of the production facility itself means, for example, that it detects the abnormality such as the deterioration of the facility at the shop-floor, prediction of the occurrence of the problem, detection of the defect of the product, In this paper, we propose a manufacturing process modeling using a queue for detection of manufacturing process abnormalities at the shop-floor, and detect abnormalities in the modeling using SVM, one of the machine learning techniques. The queue was used for M / D / 1 and the conveyor belt manufacturing system was modeled based on ${\mu}$, ${\lambda}$, and ${\rho}$. SVM was used to detect anomalous signs through changes in ${\rho}$.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.73-80
• /
• 2008

ALINEA algorithm, which is one of the best on-ramp metering algorithms, was designed to control the traffic volume from on-ramp in order to maintain the optimal occupancy rate of the detectors installed downstream of the merge area. But, the reliability of occupancy rate estimated from the loop detectors, which are used most commonly in Korea, is relatively lower than other parameters such as speed and volume. Moreover, because occupancy rate depends on the length of loop detectors and site, lots of calibration work is required whenever they are installed in order to estimate the occupancy rate. Therefore, there exists room for improvement of ALINEA algorithm because only occupancy rate having some problems is considered as a control parameter in ALINEA algorithm. Practically it is difficult to measure or perceive the occupancy rate for traffic engineers and drivers. On the other hand, speed can be good alternative which can overcome the defect induced by using occupancy. In this study, occupancy based ALINEA algorithm is converted to speed based ALINEA assuming the linear relationship between density and speed.