• Archives of Reconstructive Microsurgery
• /
• v.9 no.2
• /
• pp.172-178
• /
• 2000

With esthetic concern in the reconstruction of skin and soft tissue defects of face, the use of local flap has been the method of choice. However, when there is extensive tissue loss in the face, local flaps do not provide satisfactory results. The amazing development of microsurgical technique has decreased the percentage of free flap failure, thus making free flap use in reconstruction of facial soft tissue defects. Many free flaps has been applied for reconstruction of face defects. Especially, the radial forearm flap has numerous advantages with which facial reconstruction is made possible. But, its disadvantages are ; the sacrifice of one major artery supplying the hand and donor site complications. In order to circumvent these disadvantages, we employed posterior interosseous artery(PIA) forearm free flap for the reconstruction of the face defects. The posterior interosseous forearm island flap was first described by Zancolli and Angrigiani(1985). Currently, the PIA island flap and free flap have been used for hand reconstructions. The disadvantages of the PIA flap are ; the small caliber of the pedicle, different locations of the perforating branches, and the proximity of the motor branch of the radial nerve. But, its advantages lies in preserving the major artery of the hand, minimal donor site morbidity, and fairly well matched skin texture and color, and that the flap volume is sufficient, not too bulky with convenient handling. By using this flap, we performed 1 case of tumor resection and 1 case of traumatic defect. From our experiences we conclude that it is one of many useful methods in the reconstruction of the skin and soft tissue defects of the face. We also have discussed advantages and some limitations of various free flaps for reconstruction of the face.

• Journal of Yeungnam Medical Science
• /
• v.11 no.2
• /
• pp.303-313
• /
• 1994

Since introduction of venous flap in 1980, many experimental studies and clinical applications of various kinds of venous flaps were reported. Venous flap has the following advantages: (1) nonbulky and goo-quality of flap (2) long & large vascular pedicle (3) easy & rapid elevation of flap (4) no sacrifice of major arteries (5) a single operarive field. But, we also have some disadvantages of difficult handling of the pliable veins and the uncertainty of flap survival. For the better result we had to design the size of the flap larger than that of defect and increase the number of draining vein to reduce the postoperative edema of the flap. We have treated the defects of soft tissue of the hand using free arterialized venous flap from the flexor aspect of the forearm & had an excellent results.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.251-257
• /
• 2004

The Electro-Optical Camera(EOC) image of the first Korea Multi-Purpose Satellitel(KOMPSAT-1) has both high resolution and convenient acquisition of research data, but on the other hand it has a defect of one band image. Fortunately, the multispectral Moderate Resolution Imaging Spectroradiometer (MODIS) image data are receiving every day at the Korea Aerospace Research Institute (KARI). Therefore, this paper performed an effective merging for survey of reclaimed land using the high-resolution (6.6m) KOMPSAT-1 EOC image and the multispectral MODIS image data. According this paper prepared map of reclaimed lands in Western Coast of North Korea as quantitative(position and form) survey of reclaimed lands of North Korea using merged image. The use of KOPSAT-1 EOC image and MODIS images was found to be economical such using of large scale areas as reclaimed land or according easy to collect information and such north korea as inaccessible areas like as receiving every day.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.6
• /
• pp.696-702
• /
• 2012

In this study, a noncontact laser ultrasonic system is proposed for rail defect detection. An Nd-Yag pulse laser is used for generation of ultrasonic waves, and the corresponding ultrasonic responses are measured by a laser Doppler vibrometer. For the detection of rail surface damages, the shape of the excitation laser beam is transformed into a line. On the other hand, a point source laser beam is used for the inspection of defects inside a rail head. Then, the interactions of propagating ultrasonic waves with defects are examined using actual rail specimens. Amplitude attenuation was mainly observed for a surface crack, and reflections were most noticeable from an internal damage. Finally, opportunities and challenges associated with real-time rail inspection from a high-speed train are discussed.

• Archives of Reconstructive Microsurgery
• /
• v.5 no.1
• /
• pp.62-69
• /
• 1996

Lateral arm flap has been used for the reconstruction of the various defects in hand, head and neck region. This flap is highly dependable as a free flap because of its thin flap thickness, constant vascular anatomy and possibility of osteocutaneous flap and fascial flap. Recently, many authors tried extended approach for vascular pedicle and distal flap extension for bigger defects. In this study, we review previous articles and 14 cases used lateral arm flaps for coverage of the varying defect on head and neck, upper and lower extremities succesfully. In conclusion, lateral arm flap has constant anatomical structure and can overcome the disadvantages such as short pedicle length and limited flap size, then the range of its application can be very widened.

• Proceedings of the KIEE Conference
• /
• 2004.11d
• /
• pp.63-66
• /
• 2004

It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the characteristics of GIS PD signals measured with ultra wide band (UWB) GIS PD defecting system in which PD signals are defected into the dual UHF band. Thc UWB PD detection system consists of the UWB UHF coupler, the UWB low noise amplifier (LNA) and the oscilloscope. The dual bands for PD signals are 0.5-2GHz(full band) and 1-2GHz(high band). As results, it was found that the partial discharges of each defect have their own characteristic pattern and the ratio of High hand to Full band increases with gas pressure.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.4
• /
• pp.666-671
• /
• 2010

Multi-layer perceptron neural networks have been constructed to classify four types of defects in steam generator tubes. Three features are extracted from the signals of the eddy current testing method. These include maximum impedance, phase angle at the point of maximum impedance, and an angle between the point of maximum impedance and the point of half the maximum impedance. Two hundred sets of these features are used for training and assessing the networks. Two approaches are involved to train the networks and to classify the defect type. One is the conjugate gradient method and the other is the Broydon-Fletcher-Goldfarb-Shanno method which is recognized as the most popular algorithm of quasi-Newton methods. It is found from the computation results that the training time of the Broydon-Fletcher-Goldfarb-Shanno method is much faster than that of the conjugate gradient method in most cases. On the other hand, no significant difference of the classification performance between the two methods is observed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.251-256
• /
• 2006

The purpose of this study was to confirm multiple retention system of C-PAM, A-PAM and Inorganic micro particles vs. traditional micro particle system and dual polymer system by measuring retention, drainage and formation using RDA HSF and Techpap 2D -F Sensor The benefits of dual polymer system were easy to use, low chemical consumption and good retention property but defect was worse drainage property than inorganic microparticle systems. On the other hand, Inorganic microparticle system had benefit of good drainage effect but defects were difficult to use, high chemical consumption. Therefore, we tried to find optimal morphology of polyacrylamide and applied to multiple retention system of C-PAM, A-PAM and inorganic microparticles to compensate defects of both of retention systems. As a result, we found the performance of branched C-PAM, branched A-PAM and inorganic micro particle triple system was more appropriate than traditional inorganic mircoparticle systems or dual polymer systems by comparing retention, drainage and formation.

• Journal of Welding and Joining
• /
• v.3 no.2
• /
• pp.1-9
• /
• 1985

In this study, the influence of carbon equivalents on friction welds of similar steels was investigated. Four types of steels with 15mm diameter tested in the wide range of carbon equivalents from 0.3 to 1.1 Main experimental results are summarized as follows : (1) Under the constant burn-off length, the friction time becomes longer with the increasing carbon equivalent, but the upset length shows no consistent tendencies. (2) Due to the recrystallization in the contact area, the maximum hardness occurs some away from the contact surface. And it increases almost linearly with the increasing carbon equivalent. (3) Even a steel with 1.1 C.E. can be friction welded to make defect-free welds. (4) With the increasing carbon equivalent, the bend angle and charpy impact value decrease very rapidly in the range from 0.3 C. E., but remain nearly unchanged for C. E. higher than 0.6. (5) Heat treatment of the base metals before welding has very little influence on the mechanical properties of welds. On the other hand, normalizing of the welds improves the bend angle and charpy impact value, but its effect becomes almost negligible, when the carbon equivalents are higher than 0.6.

• Korean Journal of Materials Research
• /
• v.13 no.9
• /
• pp.598-605
• /
• 2003

The optimized conditions for the cross-sectional TEM sample preparation using tripod polisher and ion-beam miller was confirmed by AFM and TEM. For the TEM observation of interfaces including InGaN layers like InGaN/GaN MQW structures, the sample preparation by the only tripod polishing was useful due to the reduction of artifacts. On the other hand, in case of the thick nitride films like ELO, PE, and superlattice, both tripod polishing and controlled ion-beam milling were required to improve the reproducibility. As a result, the ion-beam milling with the $60^{\circ}$modulation showed the minimum height difference between film and sapphire interface and the ion-beam milling of the $80^{\circ}$modulation showed the broad observable width.