• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1262-1270
• /
• 2020

Recently, the smart video surveillance research, which has been receiving increasing attention, has mainly focused on the intruder detection and tracking, and abandoned object detection. On the other hand, research on real-time detection of stolen objects is relatively insufficient compared to its importance. Considering various smart surveillance video application environments, this paper presents two different types of stolen object detection algorithms. We first propose an algorithm that detects theft of statically and dynamically registered surveillance objects using a dual background subtraction model. In addition, we propose another algorithm that detects theft of general surveillance objects by applying the dual background subtraction model and Mask R-CNN-based object segmentation technology. The former algorithm can provide economical theft detection service for pre-registered surveillance objects in low computational power environments, and the latter algorithm can be applied to the theft detection of a wider range of general surveillance objects in environments capable of providing sufficient computational power.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.2
• /
• pp.29-36
• /
• 2017

The objective of this study was to analyze the temporal and spatial characteristics of agricultural drought by tracking the daily reservoir storage in Chungnam province. All daily records of the percent of reservoir storage from 2000 to 2015 were collected for 130 irrigation reservoirs from the RIMS (Rural Infrastructure Management System). The temporal change of province-wide average reservoir storage and the statistics showed that the annual average and minimum percent of reservoir storage in 2015 were extremely low like as those in the historical drought years of 2001 and 2012. The minimum reservoir storage on record was a 41 % at the end of September and remained far less than its historical average even until the end of the year. Furthermore, the annual average reservoir storage (68.3 %) recorded the lowest on record since 2000. In addition, about half of 130 major irrigation reservoirs in Chungnam fell into the risk of water shortage below 30 % full, and, in terms of annual minimum reservoir storage, the 79 reservoirs yielded lower storage in 2015 comparing with the measured in another drought year, 2001. On the other hand, irrigation reservoirs of comparatively worse storage condition revealed to be mostly located on the inside, such as Cheongyang-gun and Hongsung-gun. Conclusively, the low reservoir storage, still far below average even on December 2015, induced a serious concern about that more extreme drought would happen in the next spring.

• Preventive Nutrition and Food Science
• /
• v.11 no.4
• /
• pp.348-357
• /
• 2006

Nano is a unit that designates a billionth; accordingly nanotechnology could be described as the study and applications of the unique characteristics and phenomena of nanometer size materials. Applications of nanotechnology fall into two categories (one is top-down and the other is bottom-up). Currently, most products are the results of the top-down approach. Nanofoods have distinct functional characteristics stemming from the size, mass, chemical combinations, electrolytic features, magnetic properties of food sources at the nano level and which can be applied for safe absorption and delivery into the body. The greatest advantage of nanofood is that it permits the efficient use of small quantities of nutritional elements by increasing digestive absorption ability and by delivering natural elements without any change in their original characteristics. On the other hand, there are still unsolved problems, such as questions about safety and introduction of harmful material. The demand for new commercial food products is increasing, and commercial food producers are gradually combining nanotechnology and traditional food preparation methods. Nanofoods will improve our eating habits remarkably in the future. Tomorrow we will design nanofoods by shaping molecules and atoms. It will have a big impact on the food and food-processing industries. The future belongs to new products and new processes with the goals of customizing and personalizing consumer products. Nanotechnology is expected to be applied to not only foods themselves, but also to food packaging, production, safety, processing and storage. Also, it is believed that nanotechnology will be applied tracking finished products back to production facilities and even to specific processing equipment in those facilities. The aim of this study is the introduction of technology, applications, products, markets, R&D, and perspectives of nanofoods in the food industry.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.1
• /
• pp.97-106
• /
• 2020

Urban parks provide a variety of ecosystem services and are an important means of providing positive functions to urban ecosystems. Recently, various studies on wildlifes in urban parks have been conducted. However, there is a lack of research on habitat use in urban parks at important times such as before and after fledging in bird ecology. This study analyzed habitat use and home-range before and after fledging on Cheongsa park, a neighborhood park located in Cheonan city. An artificial nest was set up to check and capture great tit in fledging time. One female was captured and attached to the NTQB-2 (0.4g) radio transmitter, the location was tracked using SIKA Radio Tracking Receiver, hand-held three element Yagi antenna and GPS. Location information was recorded for 10 minutes for 3 hours each morning and afternoon for 12 days from May 17 to May 31, 2019. As a result, the home-range of the target species was 1.776 ha (MCP) and the core area was 499 ㎡ (KD 50%). The average daily home-range was 0.513 ha for the entire period, 0.688 ha before fledging, 0.339 ha after fledging based on MCP. The bird moved about 29.9 m on average and moved up to 131.7 m. For the most of the time, the great tit stayed inside the park, but the bird also used small green spaces such as street trees, tree flower beds, and green areas of unused lands. The results of this study could be applied to the study of habitat use and the greenery management policy of the urban park considering wild birds.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.2
• /
• pp.227-237
• /
• 2002

A numerical technique for simulating the aggregation of charged particles was presented with a Brownian dynamic simulation in the free molecular regime. The Langevin equation was used for tracking each particle making up an aggregate. A periodic boundary condition was used for calculation of the aggregation process in each cell with 500 primary particles of 16 nm in diameter. We considered the thermal force and the electrostatic force for the calculation of the particle motion. The electrostatic force on a particle in the simulation cell was considered as a sum of electrostatic forces from other particles in the original cell and its replicate cells. We assumed that the electric charges accumulated on an aggregate were located on its center of mass, and aggregates were only charged with pre-charged primary particles. The morphological shape of aggregates was described in terms of the fractal dimension. In the simulation, the fractal dimension for the uncharged aggregate was D$\_$f/ = 1.761. The fractal dimension changed slightly for the various amounts of bipolar charge. However, in case of unipolar charge, the fractal dimension decreased from 1.641 to 1.537 with the increase of the average number of charges on the particles from 0.2 to 0.3 in initial states. In the bipolar charge state, the average sizes of aggregates were larger than that of the uncharged state in the early and middle stages of aggregation process, but were almost the same as the case of the uncharged state in the final stage. On the other hand, in the unipolar charge state, the average size of aggregates and the dispersion of particle volume decreased with the increasing of the charge quantities.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.100-106
• /
• 2020

In this paper smart shoes for dementia care using embedded boards and Low Power Wide Area technology and their application software are implemented. The communication board composed of Cortex-M3 board and LoRa module is embedded into groove made in outsole of smart shoes. Including the mold, the shoe outsole was manufactured by hand. By using application software and embedded board, caregiver can track the position of dementia patient using GPS and LoRa network. The location tracking and data transmission operations of smart shoes have been successfully verified in the outdoor environment. The smart shoes of this paper are applicable to a safety device to prevent the disappearance of demented patients through results of experiments and if bigdata is collected and analyzed by deep-learning, it may be helpful to analyze the predictive path of dementia patients or the pattern of dementia.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.574-581
• /
• 2024

This study explores the usability of extended reality (XR) content tailored for production process training, with a focus on user experience. Participants engaged with extended reality training modules, and qualitative data was subsequently collected through interviews. These interviews evaluated the hardware, user interface, and overall user satisfaction. The analysis utilized python packages for keyword extraction and word cloud visualization, offering insights into user perceptions. The findings revealed that although the hardware was deemed comfortable, concerns were raised regarding its weight and heat emission. The interactive interface, which relies on hand tracking, encountered issues with recognition rates, leading to suggestions for alternative input methods. Users acknowledged extended reality's potential impact on industries like healthcare and education, sharing both positive and negative views on the technology. This research enhances our understanding of user responses and guides the future enhancement of extended reality content for industrial applications, aiming to improve its quality and practical usability

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.247-258
• /
• 2014

To evaluate the influence of the external force components on the littoral currents in the Gusipo beach, Jeonbuk, West Coast of Korea where a wide tidal sand flat developed, a coupled hydrodynamic model considered real time tidal currents and wave-induced currents was constructed in which the EFDC for tides and tidal currents, the SWAN for waves and the SHORECIRC for wave-induced currents were used as the hindcasting models. A series of field observations for tides, tidal currents and incident waves were carried out and especially to observe the littoral currents in the tidal sand flat, the GPS mounted and light weight drogues were used. Also wind data were collected from the adjacent weather station. To analyze the littoral current components, the numerical drogue tracking results considered real time winds, tides and waves were compared with the field drogue data. The drift speed of numerical drogues was reproduced as the range of 68.0~105.2% compared with the field data and the velocity error of main direction component showed a good result as -16.7~10.0%. As a result, in the mild slope tidal flat including wide surf zone, the tides and winds were the major affection component of the littoral currents, on the other hand, the wave-induced currents seemed the minor component when the incident wave heights were relatively small.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.2
• /
• pp.11-20
• /
• 2015

We present a new interactive technique for directing the motion sequences of an animated character by dragging its specific body part to a desired location in the three-dimensional virtual environment via a hand motion tracking device. The motion sequences of our character is synthesized by reordering subsequences of captured motion data based on a well-known graph representation. For each new input location, our system samples the space of possible future states by unrolling the graph into a spatial search tree, and retrieves one of the states at which the dragged body part of the character gets closer to the input location. We minimize the difference between each pair of successively retrieved states, so that the user is able to anticipate which states will be found by varying the input location, and resultantly, to quickly reach the desired states. The usefulness of our method is demonstrated through experiments with breakdance, boxing, and basketball motion data.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.85-90
• /
• 2013

PID control for unstable processes with time delay is not easy to apply because of unstability due to the poles existing on left-hand side in s-plane and the effect of time delay. In this paper, the authors consider the PID controller design technique in case of predefining overshoot or rising time by designer according to control environment. To deal with constraint problem like this, in this paper, the RCGA incorporating the penalty strategy is used. This is the method that if the RCGA violates given constraints, the defined penalty function is summed to the evaluation function depending on the severity and then the given constraint problem is converted to non-constraints optimization problem. The proposed method is applied to the unstable FOPTD(First Order Plus Time Delay) system and simulations are accomplished to illustrate the set-point tracking performance.