• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.183-195
• /
• 1999

Growth and development evaluation of patients with growth potential is of great importance for orthodontic treatment planning. Timing of orthodontic intervention greatly depends on one's developmental status, thus if there is a difference in skeletal maturation among malocclusion types different treatment timing should be applied. The objective of this study was to evaluate and compare skeletal maturation among different malocclusion types. The samples used in this study was 38 Class I, 36 Class II and 33 ClassIII females aging from 8 to 10 years. Handwrist X-rays were taken with 6 month interval till 12-13 years of age. The results were as follows. 1. There was no skeletal maturity difference among different malocclusion types. 2. The hamular process of hamate was observed at $9.16{\pm}0.72$ years, pisiform bone at $9.13{\pm}0.71$ years and the ulnar sesamoid at $10.34{\pm}0.84$ years. 3. The timing of epiphyseal capping on the third finger was $10.96{\pm}0.80$ years for distal phalanx and $11.27{\pm}0.87$ years for middle phalanx, $11.12{\pm}0.85$ years for proximal phalanx of the first finger, $11.21{\pm}0.82$ years for radius and $11.62{\pm}0.85$ years for middle phalanx of the fifth finger. 4. The appearance of pisiform bone showed high correlation with appearance of hamular process of hamate(r=0.91) and ulnar sesamoid bone appearance showed high correlation with advanced ossification of hamular process(r=0.86). Timing of epiphyseal capping among different parts showed high correlation(r=0.80-0.90). 5. The shape of middle phalanx of the fifth finger showed the highest variability ($20.6\%$).

• Journal of Korean Medical classics
• /
• v.11 no.1
• /
• pp.416-512
• /
• 1998

The following conclusions are obtained from the studies on the chapters concerning phisiology, pathology, daily conduct, materia medica, pulse, and urinalysis from , of the "Four Tantras". 1. The theoretical basis forming the Tibetan Medicine is the substance of phlegm, bile, and wind each of which is divided into five kinds. These phisiological substances can be transformed into pathological factors when certain environment is formed. 2. In embryology, the semen of the father and menstral blood of mother is considered the most important condition in conception, and the Five factors are regarded as important. There is a detailed explanation of development of the fetus while it stays in the womb of mother during 38weeks, such as the formation of the viscera, channels, sense organs, etc. 3. There is metaphor which compares the human body with the king's palace. With the development of human anatomy, there is the detailed anatomical picture of anterior and posterior aspects of human body. And also there is the measurement of physiological constitution and the three fluids. 4. In division of the channels, they concerned the now of the blood and distribution of the nerve fibers, and each channel is connected with one another. The division of the cannel is namely embryonic channel, channel of existence, channel of connection, and the course of life principle. 5. The seven bodily constituents and three factors of phlegm, bile, and wind are important in sustaining the life of human body as well as growth and maturization, and when their equilibrium is broken, the human body is degnerated, and finally death comes. 6. The signs of death is divided into distant sign, remote sign, certain sign. and uncertain sign, and is used as a clue in diagnosis of the disease. Especially there is a mention about the mechanism of the dreams, and different dreams according to the condition of the patient. 7. In pathology, there is the cause of the disease, the environmental factors which can induce disease, the path by which disease come into the human body, the characteristics of the disease, and the kinds of disease. 8. There is a mention about the conduct, and it is divided into the daily conduct, the mental attitude, and the side-effects which can occur when one puts up with the physiological actions of the body. 9. The daily diet is divided into food and beverage. The food is divided again into grain, meat, fat, boiled food, and spiced food, and the beverage into milk, water, and wine. 10. The pulsation should be taken in lift hand to diagnose heart, small intestine, stomach, spleen, kidney, reproductive organ, and in right hand jungs, large intestine, liver, gall bladder, kidney, and bladder. In the healthy person, the pulse moves 5times in one perspiration, and the type of pulse is constant while the pulse moves 100times. But unhealthy person's pulse is different from this. The urinalysis is the unique part of Tibetan Medicine, and is important in examination of the disease. One should decide which of the three factors are dominant by the obervation of the color, amount of the steam and how long it lasts, odour, foam, and the shape of the swirl in three different states when the urine is hot, warm, and cold. One can determine the life of the patient and which viscera is the cause of the disease by the pulse, and whether the nature of the disease is hot or cold by the urinalysis. 11. The materia medica contains gemstones, minerals, plateau medication, and meat products.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.4
• /
• pp.1-13
• /
• 2012

Landscape Garden tradition of excellent examples of places that are focused on hydroponics management. South Korea and China, this thing was noticeable among them South Korea which emphasizes the natural contours of the natural streams in accordance with the basic idea to use examples that feature will do. Gardens in China by constructing a flat terrain also naturally expect to find examples of conscious ideas depending on the water and the mountains are characterized. These differences and similarities through the Gardens of the tradition of separating the two countries to build their Garden by site Soswaewon and Zolzengwon appear in the target hand is to identify the characteristics between the director. Research methods literature survey, field survey of the natural environment through the plantation, background history, the people who intend to study, to configure the ground water space, Jian, construction and management has been studied in hydroponics. As a result, Damyang-gun, Jeollanam-do, South Korea in the Garden of the Soswaewon(瀟灑園) organization with inner garden and outer garden of a small, but the scale of production to Yang San-Bo's 'eunilgwan' implement security based rock mooring takes the form of a linear channel and the water came down from riding pending to avoid artifacts gathered again took the form of streams flowing into that. Hutton was a rubble pile structure Jian. Building an Gwangpunggak, Jewoldang, as Daebongdae consist, respectively, depending on the purpose of the mooring was deployed by focusing. The other hand, is located at Suzhou, Jiangsu of China Zolzengwon(拙政園) flat terrain is located on. Largely divided eastern gardens, Central Gardens and the Gardens of the West was conducted by five thirds of the total area of Water accounted for. Pavilion the center of the pond, Seokgasan achieve a variety of landscapes and architectural features that are most of the Ming. The two countries, each region's natural environment and human environment, different, unique characteristics to each other in the implementation of a unique hydroponic Garden tube and ideological backgrounds, but especially the 'eunilgwan' and the terrain that is divided according to the conditions of this study, so fulfilling Garden was conducted.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.72-84
• /
• 2010

This study was attempted in order to offer basic data for implementing and applying Samjonseokjo(三尊石造), which is one of traditional stone construction method, by confirming how the constructive principle is expressed such as proportional beauty, which is contained in the modeling of Triad of Buddha Carved on Rock that was formed in the period of the Three States, centering on Triad of Buddha Carved on Rock in Susan. The summarized findings are as follows. 1. As a result of analyzing size and proportion of totally 17 of Triad of Buddha Carved on Rock, the average total height in Bonjonbul(本尊佛) was 2.96m. Right Hyeopsi(右挾侍) was 2.19m. Left Hyeopsi(左挾侍) was 2.16m. The height ratio according to this was 100:75:75, thereby having shown the relationship of left-right symmetrical balance. The area ratio in left-right Hyeopsi was 13.4:13.7, thereby the two area having been evenly matched. 2. The Triad of Buddha Carved on Rock in Seosan is carved on Inam(印岩) rock after crossing over Sambulgyo bridge of the Yonghyeon valley. Left direction was measured with $S47^{\circ}E$ in an angle of direction. This is judged to target an image change and an aesthetic sense in a Buddhist statue according to direction of sunlight while blocking worshipers' dazzling. 3. As for iconic characteristics of Buddha Carved on Rock in Seosan, there is even Hyeopsi in Bangasang(半跏像) and Bongjiboju(捧持寶珠) type Bosangipsang. In the face of Samjon composition in left-right asymmetry, the unification is indicated while the same line and shape are repeated. Thus, the stably visual balance is being shown. 4. In case of Triad of Buddha Carved on Rock in Seosan, total height in Bonjonbul, left Hyeopsi, and right Hyeopsi was 2.80m, 1.66m, and 1.70m, respectively. Height ratio in left-right Hyeopsibul was 0.60:0.62, thereby having been almost equal. On the other hand, the area ratio was 28.8:25.2, thereby having shown bigger difference. The area ratio on a plane was grasped to come closer to Samjae aesthetic proportion. 5. The axial angle of centering on Gwangbae was 84:46:50, thereby having been close to right angle. On the other hand, the axial angle ratio of centering on Yeonhwajwa(蓮華坐: lotus position) was measured to be 135:25:20, thereby having shown the form of inequilateral triangle close to obtuse angle. Accordingly, the upper part and the lower part of Triad of Buddha Carved on Rock in Susan are taking the stably proportional sense in the middle of maintaining the corresponding relationship through angular proportion of inequilateral triangle in right angle and obtuse angle. 6. The distance ratio in the upper half was 0.51:0.36:0.38. On the other hand, the distance ratio in the lower half was 0.53 : 0.33 : 0.27. Thus, the up-down and left-right symmetrical balance is being formed while showing the image closer to inequilateral triangle. 7. As a result of examining relationship of Samjae-mi(三才美) targeting Triad of Buddha Carved on Rock in Susan, the angular ratio was shown to be more notable that forms the area ratio or triangular form rather than length ratio. The inequilateral triangle, which is formed centering on Gwangbae(光背) in the upper part and Yeonhwajwa(lotus position) in the lower part, is becoming very importantly internal motive of doubling the constructive beauty among Samjae, no less than the mutually height and area ratio in Samjonbul.

• Journal of Acupuncture Research
• /
• v.21 no.3
• /
• pp.193-214
• /
• 2004

Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion with ginger objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with ginger. Methods : We have selected the indirect moxibustion with ginger among many indirect moxibustions. We produced a slice of ginger to a thickness of 3, 4, 5mm and the moxa cone having a diameter of 8mm, a height of 10mm for making a comparative study of characteristics of moxa cone according to change the density. We have made a comparative study of the thermodynamic characteristics of moxibustion with ginger with or without holes. We measured combustion times and calculated temperatures, temperature gradients in each period during a combustion of moxa. Results : 1. We found out it was not significantly influenced by the existence of the punched holes in a slice of ginger because the punched holes grow smaller immediately. 2. The duration of the preheating period became longer according to thickness of a slice of ginger and was not directly proportional to the density of moxa cone. The duration of the preheating period was extremely short when it burned a 100mg moxa cone. That was influenced by the density of moxa cone. 3. The duration of the heating period became longer according to thickness of a slice of ginger likewise the preheating period bacause the density of moxa cone had effected on the combustion characteristics. The duration of the heating period was extremely long when it burned a 100mg moxa cone. On the other hand the maximum temperature in the heating period was appeared that the combustion with a thin slice of ginger was highest and measured that the large density of moxa cone was higher. But the maximum temperature in the heating period was about $37.8^{\circ}C{\sim}44.2^{\circ}C$respectively lower in others. 4. The duration of the retaining period was some doubling shorter than that of the heating period that is concerned the shape of moxa cone. The temperature measured the close of a retaining period was $36.6^{\circ}C{\sim}41.8^{\circ}C$, that was considerably lower temperature. 5. The mean ascending temperature velocity and the mean descending temperature velocity were $0.042{\sim}0.073^{\circ}C/sec$, $-0.027{\sim}-0.064^{\circ}C/sec$ respectively. Then, the ascending temperature velocity was some faster than the ascending temperature velocity. Conclusions : The quantitative standard for obtaining the effective heating stimulation is that if the slice of ginger made a hole in it, we had to use the needle above 1.5mm diameter. The recommended size of a slice ginger is the 14mm diameter and the 2~3mm thickness. The moxa cone is formed the conical shape that the base diameter was 8mm, the height was 10mm, the density was $600mg/cm^2$.

• Cartoon and Animation Studies
• /
• s.51
• /
• pp.361-390
• /
• 2018

Users of KakaoTalk emoticons use Kakao Talk emoticons as means of communicating their emotions in virtual space. Emotional state is represented by design element (auxiliary, color, form, motion) and storytelling element contained in emoticons. The purpose of this study is to investigate the factors of the storytelling and design elements of kakaoTalk emoticons and how they prefer the kakaoTalk emoticons as emotional expression means. In terms of storytelling, crocodiles, peaches, dogs, ducks, lions, moles, and rabbits were made up of ordinary fruits and animals. Most of the emoticons are composed of stories with unique personality, and each story has a complex one by one, which makes it easy for users to approach and use them. In terms of design, I used various auxiliary elements (flame, sweat, tears, runny nose, angry eyes, etc.) to express angry, sincere, nervous, begging, joy, and sadness. The color elements consisted of most of the warm color series with the unique colors (green, red, yellow, pink, white, black, brown, etc.) of emoticon characters regardless of feelings of joy, anger, sadness, pleasure. The form factor is composed of a round shape when expressing factors such as joy and sadness. On the other hand, when FRODO and NEO express sadness and anger, they represent the shape of a rectangle. The motion elements are horizontal, vertical, and oblique expressions of APPEACH, NEO, TUBE, and JAY-G, expressing emotional expressions of sadness, anger, and pleasure. APEACH, TUBE, MUZI & / Shows the dynamic impression of the oblique and the radiation / back / forward / rotation. The anger of TUBE and FRODO shows horizontal / vertical / diagonal and radial motion. As a result of this study, storytelling is structured in accordance with each emoticon character. In terms of design, auxiliary elements such as flame, sweat, and tears are represented by images. The color elements used the unique colors of the character series regardless of the difference of emotion. The form factor represented various movements for each emotion expression. These findings will contribute to the development of communication, emotional design and industrial aspects. Despite the significance of the above paper, I would like to point out that the analysis framework of the storytelling and the semiotic analysis of the supplementary elements are not considered as limitations of the study.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.15-23
• /
• 1984

Difference of the entering and the escaping behaviour of shrimp(Palaemon pacificus) to the model traps were observed in accordance with netting materials, baits, type of traps and slope of flapper, and gathering responses were also investigated on the odour of bait extracts in the aquarium as the preliminary test. In order to investigate the difference in catch according to type and structure of traps those designated from A to E were made of iron frames and nettings. The type A was a conical shape with two entrances at its both sides and the others were square piller shape with one entrance at their upper surface(type B) or two entrance at their both ends(type C, D and E). However th type D and E were connected with flapper and the thye E was made by attaching iron frames of same height under the type D. The traps were prepared 10 each and so a total of 50 traps were used in the experiment at sea. The main species caught was Charybdis japonica, but Astroconger myriaster was also caught fairly. The catches of these species were significant in difference between the types of traps. That is, Charybdis japonica was caught more in type A, C and D than others and less in type B and E, and Astroconger myriaster was caught more in type A and D and less in type B and E. However the catch of Astroconger myriaster in type C, even if less than that in type A showed no significant difference with the other traps. The total catch of Charybdis japonica and Astroconger myriaster was almost same in order with the catch of Charybdis japonica. The type B and E seemed to be difficult in entering of fishes into them. However, the type A and C seemed to be easy not only in entering, but also in escaping. Especially, the type C showed more escaping. On the other hand, the type D seemed to be not so easy in entering of fishes as type A and C, but very difficult in escaping. Consequently, the escaping of fishes from the traps seemed to be more difficult in conical traps than any other traps. The catches might be influenced by the bait with bag compare to without bag and also the immersed time of traps into water for fishing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.3
• /
• pp.179-188
• /
• 1981

The authors made an investigation concerning the geographical distribution and some major differentiations in morphological characteristics associated with the each habitat, of the pond smelt, Hypomesus olidus, which was introduced into Korea more than 50 years ago. Major characteristics utilized for the comparison study were upper jaw (maxillary), number of fin rays, scale structure, vertebral count, number of pyloric caeca, number of gill rakers, and the relative measurements of these and other internal characters. 1. The main areas of natural distribution are Paro Lake, Soyang Lake, Han River, Euirim Lake, and Ogjeong Lake (or Unam Lake) and the tributaries of these waters. 2. Morphological variations varied when the mean values of measurements from each area were compared with the standard measurement value by mosaic comparison, and in some instances a significant variation was found. 3. The most significant variations were found in the number of fin rays of pectoral and anal fins; the lengths from the tip of snout to the origin of pectoral fin, from snout to ventral fin, and from snout to anal fin, relative to standard body length; eye depth relative to head length; upper jaw: the number of pyloric caeca and the scale structure. Variations, on the other hand, by each habitat were not clear in the numbers of ventral and dorsal fin rays, gill rakers, vertebrae and lateral line scale : and the depth of caudal peduncle and distance from the tip of snout to the origin of dorsal fin relative to standard body length. 4. The scales of pond smelt showed some differences in the shape of scales, the shape and position of the focus and the number of ridges according to the scale positions on the body. No radii were present. The relations between longitudinal and transverse diameters of the scale suggest that the pond smelts of Soyang Lake and Un-am Lake are closely related, and those of Han River and Euirim Lake are also closely related. 5. The geographical variations in morphology of the pond smelt seem to have resulted from the variations in turbidity, water temperature, salinity (rather conductivity) and currents. 6. From the results obtained, it may be concluded that such factors as supramaxillary, relation between scale length and its breadth, number of caudal vertebrae and eye depth relative to head length may be used as the key characters for the classification of geographical varieties of Pond smelt.

• Progress in Medical Physics
• /
• v.18 no.1
• /
• pp.48-54
• /
• 2007

This study is to develope a phantom for MOSFET (Metal Oxide Semiconductors Field Effect Transistors) dosimetry and compare the dosimetric properties of standard MOSFET and microMOSFET with the phantom. In this study, the developed phantom have two shape: one is the shape of semi-sphere with 10cm diameters and the other one is the flat slab of $30{\times}30cm$with 1 cm thickness. The slab phantom was used for calibration and characterization measurements of reproducibility, linearity and dose rate dependency. The semi-sphere phantom was used for angular and directional dependence on the types of MOSFETs. The measurements were conducted under $10{\times}10cm^2$ fields at 100cm SSD with 6MV photon of Clinac (21EX, Varian, USA). For calibration and reproducibility, five standard MOSFETS and microMOSFETs were repeatedly Irradiated by 200cGy five times. The average calibration factor was a range of $1.09{\pm}0.01{\sim}1.12{\pm}0.02mV/cGy$ for standard MOSFETS and $2.81{\pm}0.03{\sim}2.85{\pm}0.04 mV/cGy$ for microMOSFETs. The response of reproducibility in the two types of MOSFETS was found to be maximum 2% variation. Dose linearity was evaluated In the range of 5 to 600 cGy and showed good linear response with $R^2$ value of 0.997 and 0.999. The dose rate dependence of standard MOSFET and microMOSFET was within 1% for 200 cGy from 100 to 500MU/min. For linearity, reproducibility and calibration factor, two types of MOSFETS showed similar results. On the other hand, the standard MOSFET and microMOSFET were found to be remarkable difference in angular and directional dependence. The measured angular dependence of standard MOSFET and microMOSFET was also found to be the variation of 13%, 10% and standard deviation of ${\pm}4.4%,\;{\pm}2.1%$. The directional dependence was found to be the variation of 5%, 2% and standard deviation of ${\pm}2.1%,\;{\pm}1.5%$. Therefore, dose verification of radiation therapy used multidirectional X-ray beam treatments allows for better the use of microMOSFET which has a reduced angular and directional dependence than that of standard MOSFET.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.202-223
• /
• 2020

This purpose of this article is to identify the original form of the gilt-bronze ornamental pieces unearthed from the east part of the third wooden coffin in the Naju Bogam-ri Jeongchon (NBJ) tombs. The gilt-bronze ornamental pieces were all small, measuring less than 3cm in size and about 0.2cm in thickness, and only 19 or more small pieces were identified. In each piece of gilt decoration, a circular perforation, convex pattern, leaf-shaped spangle (瓔珞), 2 small holes for attaching spangles and gilt-bronze thread, 2 small holes for unknown purposes, and a continuous dot pattern of about 0.05 cm can be observed. As a result, it was judged that the gilt-bronze pieces excavated from the NBJ No. 1 chamber were part of the Headband Crown. Therefore, type 1 and type 3 of the gilt-bronze pieces were determined to be part of the Headband, and type 2 to be part of the Vertical Ornaments. Based on previous results, two types of restoration were proposed for NBJ No. 1 tomb gilt-bronze ornaments. In the first restoration proposal, there are wave-shaped dot patterns on the top and bottom of the crown, and the middle decoration is a spangle, circular perforation and spangle and a convex-pattern. In the second restoration plan, one row of convex patterns was added among the decorations in the middle of the first. The same type of vertical ornament was found in the Sochang (小倉) collection crown, but the overall structure and shape of the crown were completely different. On the other hand, the use of small holes of unknown use, as seen in the crown, was presumed to represent holes for fixing to a cap of organic matter. The restored NBJ No. 1 tomb gilt-bronze crown is characterized by circular punching, which makes it difficult to find an analogy in the other Three Kingdoms-period crowns. Unlike the existing halls in Gaya, Mahan, and Baekje, each district has a unique shape and decoration. The gilt-bronze crown excavated from NBJ No. 1 tomb is thought to reflect these characteristics.