• 제목/요약/키워드: Hand Cycle

검색결과 480건 처리시간 0.03초

생체 신호를 이용한 핸드사이클의 효율성 분석 (Efficiency Analysis of Hand Cycle Utilizing Vital Sign)

  • 이재훈
    • 디지털콘텐츠학회 논문지
    • /
    • 제19권7호
    • /
    • pp.1297-1302
    • /
    • 2018
  • 이 연구의 목적은 실제 장애인 선수들을 대상으로 시중에 판매되고 있는 High-end급 핸드 사이클과 새로 개발한 핸드사이클의 크랭킹을 비교 분석 하고자 한다. 현재 대한장애인사이클 연맹에 선수로 등록되어 있는 선수중 동일한 지체유형을 가지고 있는 남자선수 10명을 대상으로 하였다. 대상자들의 운동학적 데이터 획득을 위해 12대의 적외선카메라(Oqus-500)를 사용하였다. 자료 획득을 위해 30초 자료 중 15초 전 후의 크랭킹 3회를 분석하였다. 통계적 검정은 SPSS 16을 이용하여 대응표본 t-test를 이용하여 RX와 시제품의 운동역학적 변인의 차이를 검정하였으며, 이때의 유의 수준은 ${\alpha}=.05$로 하였다. 크랭킹 시 근발현이 가장 높게 나타나는 180~195도 구간에 대한 선수들의 근 피로도 감소를 위해 핸드사이클 크랭크를 곡선으로 제작하여 적용할 필요가 있으며, 향후 연구에서는 핸드사이클의 크랭킹이 경기력 향상의 주요변인인 만큼 구조를 변형시킨 크랭크와 기존데이터를 비교 분석할 필요가 있다.

저압축 고팽창 기관의 기술과 개발동향 (trends in Techical a development of Miller Cycle for Gasdline Engine)

  • 정찬문
    • 기술사
    • /
    • 제34권2호
    • /
    • pp.31-36
    • /
    • 2001
  • The Otto Cycle of conventional gasoline engine has no difference between compression ratio and expension ratio. because of the same length of 4 strokes : Intake, compression, expension, exhaust. On the other hand, miller cycle engine achieves both low-compression ratio and high-compression ratio by shortening the length of compression stroke among 4 strokes. Therefore miller cycle engine is essential for lessening knocking and improving heat efficiency. This paper Is designed to discribe not only principle and the development trend of miller cycle engine but also the control system and the technical characteristics of it.

  • PDF

S-box 형태의 다 수열 발생기에 관한 연구 (On a Multiple-cycle Binary Sequence Genrator Based on S-box)

  • 이훈재
    • 한국정보처리학회논문지
    • /
    • 제7권5호
    • /
    • pp.1474-1481
    • /
    • 2000
  • The number of keystream cycle sequences has been proposed as a characteristic of binary sequence generator for cryptographic application, but in general the most of binary sequence generators have a single cycle. On the other hand, S-box has been used to block cipher for a highly nonlinear element and then we apply it to the stream cipher with a high crypto-degree. In this paper, we propose a multiple-cycle binary sequence generator based on S-box which has a high nonlinearity containing SAC property and analyze its period, linear complexity, randomness and the number of keystream cycle sequences.

  • PDF

와이어 방전가공에 의한 북현상에 관한 연구 (A Study on the Hand drum form of Wire-Cut Electric Discharge Machining)

  • 김원일;이재명;강종표
    • 한국안전학회지
    • /
    • 제12권4호
    • /
    • pp.9-14
    • /
    • 1997
  • From the experimental study of wire-cut Electric Discharge Machining for alloyed steel and tungsten carbide, the characteristics such as hand drum form has been observed and evaluated for various conditions. Hand drum form can be improved when gap voltage and spark cycle become smaller, their thickness become thinner, wire tension become larger and number of cutting is done so many times. When wire-cut 60mm thickness tungsten carbide in normal condition, Hand drum form becomes larger due to the low conductivity inducing cobalt composite rising by electrolysis.

  • PDF

2단 간헐폭기 시스템에서 aeration cycle이 질소 및 인 제거에 미치는 영향 (Influence of Aeration Cycle on Nitrogen and Phosphorus Removal in Two-Stage Intermittent Aeration System)

  • 정명선;이준호;서광범;김영관
    • 산업기술연구
    • /
    • 제23권A호
    • /
    • pp.193-197
    • /
    • 2003
  • This bench-scale research investigated the aeration cycle(on/off) as the controlling factors for nitrogen and phosphorus removal in a 2-stage, intermittent aeration process. At this experiment, the aeration cycle time(air-on/air-off) was 30min/30min, 60min/60min, 90min/90min. Organic matter removal was observed more than 90% regardless of the aeration cycle and phosphorus removal was relatively high when the aeration cycle time was 60min/60min On the other hand. For all of the aeration cycle, TN removal was appeared less than 55%. This result was probably due to the limitation of the external substrate for heterotrophic nitrification and aerobic denitrification.

  • PDF

순산소 연소 기본 사이클의 작동조건 변화에 따른 성능해석 (Influence of Operating Conditions on the Performance of a Oxy-fuel Combustion Reference Cycle)

  • 박병철;손정락;김동섭;안국영;강신형
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2971-2976
    • /
    • 2008
  • Recently, there has been growing interest in the oxyfuel combustion cycle since it enables high-purity CO2 capture with high efficiency. However, the oxyfuel combustion cycle has some important issues regarding to its performance such as the requirement of water recirculation to decrease a turbine inlet temperature and proper combustion pressure to enhance cycle efficiency. The purpose of the present study is to analyze performance characteristics of the oxyfuel combustion cycle with different turbine inlet temperatures and combustion pressures. It is expected that the turbine inlet temperature improves cycle efficiency, on the other hand, the combustion pressure has specific value to display highest cycle efficiency.

  • PDF

각종(各種) 운동선수(運動選手)의 폐기능검사성적(肺機能檢査成績) (Pulmonary Function Tests of Athletes)

  • 조징;윤평진
    • The Korean Journal of Physiology
    • /
    • 제15권1호
    • /
    • pp.45-51
    • /
    • 1981
  • The aim of this study was to investigate the pulmonary function tests of athletes related to Running, Swimming, Cycle, Taekwando, Wrestling, Boxing, Yudo, Badminton, Base-ball, Soccer, Hand-ball, Basket-ball and Volley-ball. Subjects were 269 athletes from 18 to 22 years of age. They were college students and citizens. The results are as follows: 1) Frequency of breath: (cycles/min., $M{\pm}S.D$) Running shows $13{\pm}3.6$, Swimming $12{\pm}3.2$, Cycle $13{\pm}3.4$, Taekwondo $12{\pm}4.0$, Wrestling $14{\pm}2.5$, Boxing $15{\pm}4.5$, Yudo $13{\pm}3.2$, Badminton $14{\pm}5.7$, Base-ball $15{\pm}6.2$, Soccer $13{\pm}2.5$, Hand-ball $14{\pm}2.5$, Basket-ball $12{\pm}5.6$, Volley-ball $12{\pm}4.2$(Table 2, Fig. 1). 2) Vital capacity: (1, $M{\pm}S.D$) Running shows $4.29{\pm}0.634$, Swimming $4.30{\pm}0.608$, Cycle $4.08{\pm}0.718$, Taekwondo $4.32{\pm}0.595$, Wrestling $4.40{\pm}0.663$, Boxing $4.45{\pm}0.779$, Yudo $4.58{\pm}0.389$, Badminton $3.98{\pm}0.556$, Base-ball $3.99{\pm}0.617$, Soccer $4.42{\pm}0.728$, Hand-ball $4.23{\pm}0.397$, Basket-ball $4.28{\pm}0.426$, Volley-ball $4.60{\pm}0.620$(Table 2, Table 3, Fig. 2). 3) Tidal volume: (ml, $M{\pm}S.D$) Running shows $615{\pm}180$, Swimming $603{\pm}121$, Cycle $529{\pm}189$, Taekwondo $726{\pm}112$, Wrestling $512{\pm}90$, Boxing$622{\pm}134$, Yudo $583{\pm}89$, Badminton $672{\pm}121$, Base-ball $714{\pm}97$, Soccer $579{\pm}89$, Hand-ball $507{\pm}69$, Basket-ball $628{\pm}133$, Volley-ball $597{\pm}144$(Table 2, Fig.3). 4) Breath holding time : (sec., $M{\pm}S.D$) Running shows $64{\pm}18.8$, Swimming $81{\pm}23.0$, Cycle $54{\pm}13.6$, Taekwondo $55{\pm}11.8$, Wrestling $78{\pm}12.5$, Boxing $63{\pm}9.6$, Yudo $71{\pm}14.4$, Badminton $62{\pm}9.8$, Base-ball $58{\pm}8.9$, Soccer $65{\pm}10.9$, Hand-ball $66{\pm}7.6$, Basket-ball $62{\pm}8.8$, Volley-ball $57{\pm}13.4$(Table 2, Fig.4).

  • PDF

METHOD FOR THE ANALYSIS OF TEMPORAL CHANGE OF PHYSICAL STRUCTURE IN THE INSTRUMENTATION AND CONTROL LIFE-CYCLE

  • Goring, Markus;Fay, Alexander
    • Nuclear Engineering and Technology
    • /
    • 제45권5호
    • /
    • pp.653-664
    • /
    • 2013
  • The design of computer-based instrumentation and control (I&C) systems is determined by the allocation of I&C functions to I&C systems and components. Due to the characteristics of computer-based technology, component failures can negatively affect several I&C functions, so that the reliability proof of the I&C systems requires the accomplishment of I&C system design analyses throughout the I&C life-cycle. On one hand, this paper proposes the restructuring of the sequential IEC 61513 I&C life-cycle according to the V-model, so as to adequately integrate the concept of verification and validation. On the other hand, based on a metamodel for the modeling of I&C systems, this paper introduces a method for the modeling and analysis of the effects with respect to the superposition of failure combinations and event sequences on the I&C system design, i.e. the temporal change of physical structure is analyzed. In the first step, the method is concerned with the modeling of the I&C systems. In the second step, the method considers the analysis of temporal change of physical structure, which integrates the concepts of the diversity and defense-in-depth analysis, fault tree analysis, event tree analysis, and failure mode and effects analysis.

COVID-19 이후의 손씻기 행태와 관련된 요인 융복합 연구 (Integrated Study on Factors related to Hand Washing Practice after COVID-19)

  • 김영란
    • 한국융합학회논문지
    • /
    • 제13권2호
    • /
    • pp.85-91
    • /
    • 2022
  • 손씻기는 COVID-19 방역 지침에서도 강조하듯이 거리두기 및 마스크와 더불어 가장 중요한 감염수칙이다. 본 연구는 COVID-19 이후 손씻기 실천율 향상을 위한 접근방법을 모색하고자 손씻기 실천에 영향을 주는 관련 요인을 확인하고자 하였다. 본 연구는 2020년도 지역사회건강조사 전국 원시자료를 활용하였다. 연구방법은 단변량 로지스틱 회귀분석을 시행하여 관련성을 탐색하였으며, 유의한 변수를 이용하여 다변량 로지스틱 회귀분석을 실시하였다. 분석결과 손씻기 실천율은 여성, 고학력, 저연령, 도시, 사무직, 실내에서 마스크를 착용할수록, 주기적 환기를 할수록, 주기적 소독을 할수록, 건강거리를 유지할수록 손씻기 실천율이 높은 것으로 확인했다. 본 연구 결과는 손씻기 실천율의 관련 요인을 파악함으로써 COVID-19 방역 지침의 기초자료로 활용할 수 있다.

자동차 조립라인에서 이중-헴머형(Double-hammer type) 임펙트 렌치와 오일-펄스형(Oil-pulse type)임펙트 렌치 에어공구의 국소진동가속도 및 소음수준 (Hand-Arm Vibration and Noise Levels of Double-Hammer Type and Oil-Pulse Type Impact Wrenches in Automobile Assembly Lines)

  • 정재열;김정만
    • 한국산업보건학회지
    • /
    • 제5권2호
    • /
    • pp.147-159
    • /
    • 1995
  • This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

  • PDF