• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1297-1302
• /
• 2018

Propose of this study was to compared and analyzes the cranking between the newly developed hand cycle prototype and the hign-end hand cycle that are sold on the market for the disabled athletes. For this study, 10 male subjects, who had the same type of disability, were selected from the Korea Disabled Cycle Federation. 12 infrared camera(Oqus-500) was utilized to acquire the subjects' kinematic data. we have analyzed the data of 30 seconds - 15 seconds before and after cranking. SPSS 16 was used for a statistical verification and the difference of the sports biomechanical variable between RX and the prototype was verified by utilizing pared samples t-test. The significance level at the time of the experiment was ${\alpha}=.05$. The results show that there is a need to design the hand cycle crank in a curve shape to lessen the muscle fatigue that is measured the highest between the angle of 180 to 195. In addition, comparative analysis between the existing data and the data of modified crank must be researched since the hand cycle cranking is one of the main variables in performance enhancement.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.2
• /
• pp.31-36
• /
• 2001

The Otto Cycle of conventional gasoline engine has no difference between compression ratio and expension ratio. because of the same length of 4 strokes : Intake, compression, expension, exhaust. On the other hand, miller cycle engine achieves both low-compression ratio and high-compression ratio by shortening the length of compression stroke among 4 strokes. Therefore miller cycle engine is essential for lessening knocking and improving heat efficiency. This paper Is designed to discribe not only principle and the development trend of miller cycle engine but also the control system and the technical characteristics of it.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1474-1481
• /
• 2000

The number of keystream cycle sequences has been proposed as a characteristic of binary sequence generator for cryptographic application, but in general the most of binary sequence generators have a single cycle. On the other hand, S-box has been used to block cipher for a highly nonlinear element and then we apply it to the stream cipher with a high crypto-degree. In this paper, we propose a multiple-cycle binary sequence generator based on S-box which has a high nonlinearity containing SAC property and analyze its period, linear complexity, randomness and the number of keystream cycle sequences.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.9-14
• /
• 1997

From the experimental study of wire-cut Electric Discharge Machining for alloyed steel and tungsten carbide, the characteristics such as hand drum form has been observed and evaluated for various conditions. Hand drum form can be improved when gap voltage and spark cycle become smaller, their thickness become thinner, wire tension become larger and number of cutting is done so many times. When wire-cut 60mm thickness tungsten carbide in normal condition, Hand drum form becomes larger due to the low conductivity inducing cobalt composite rising by electrolysis.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.193-197
• /
• 2003

This bench-scale research investigated the aeration cycle(on/off) as the controlling factors for nitrogen and phosphorus removal in a 2-stage, intermittent aeration process. At this experiment, the aeration cycle time(air-on/air-off) was 30min/30min, 60min/60min, 90min/90min. Organic matter removal was observed more than 90% regardless of the aeration cycle and phosphorus removal was relatively high when the aeration cycle time was 60min/60min On the other hand. For all of the aeration cycle, TN removal was appeared less than 55%. This result was probably due to the limitation of the external substrate for heterotrophic nitrification and aerobic denitrification.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2971-2976
• /
• 2008

Recently, there has been growing interest in the oxyfuel combustion cycle since it enables high-purity CO2 capture with high efficiency. However, the oxyfuel combustion cycle has some important issues regarding to its performance such as the requirement of water recirculation to decrease a turbine inlet temperature and proper combustion pressure to enhance cycle efficiency. The purpose of the present study is to analyze performance characteristics of the oxyfuel combustion cycle with different turbine inlet temperatures and combustion pressures. It is expected that the turbine inlet temperature improves cycle efficiency, on the other hand, the combustion pressure has specific value to display highest cycle efficiency.

• The Korean Journal of Physiology
• /
• v.15 no.1
• /
• pp.45-51
• /
• 1981

The aim of this study was to investigate the pulmonary function tests of athletes related to Running, Swimming, Cycle, Taekwando, Wrestling, Boxing, Yudo, Badminton, Base-ball, Soccer, Hand-ball, Basket-ball and Volley-ball. Subjects were 269 athletes from 18 to 22 years of age. They were college students and citizens. The results are as follows: 1) Frequency of breath: (cycles/min., $M{\pm}S.D$) Running shows $13{\pm}3.6$, Swimming $12{\pm}3.2$, Cycle $13{\pm}3.4$, Taekwondo $12{\pm}4.0$, Wrestling $14{\pm}2.5$, Boxing $15{\pm}4.5$, Yudo $13{\pm}3.2$, Badminton $14{\pm}5.7$, Base-ball $15{\pm}6.2$, Soccer $13{\pm}2.5$, Hand-ball $14{\pm}2.5$, Basket-ball $12{\pm}5.6$, Volley-ball $12{\pm}4.2$(Table 2, Fig. 1). 2) Vital capacity: (1, $M{\pm}S.D$) Running shows $4.29{\pm}0.634$, Swimming $4.30{\pm}0.608$, Cycle $4.08{\pm}0.718$, Taekwondo $4.32{\pm}0.595$, Wrestling $4.40{\pm}0.663$, Boxing $4.45{\pm}0.779$, Yudo $4.58{\pm}0.389$, Badminton $3.98{\pm}0.556$, Base-ball $3.99{\pm}0.617$, Soccer $4.42{\pm}0.728$, Hand-ball $4.23{\pm}0.397$, Basket-ball $4.28{\pm}0.426$, Volley-ball $4.60{\pm}0.620$(Table 2, Table 3, Fig. 2). 3) Tidal volume: (ml, $M{\pm}S.D$) Running shows $615{\pm}180$, Swimming $603{\pm}121$, Cycle $529{\pm}189$, Taekwondo $726{\pm}112$, Wrestling $512{\pm}90$, Boxing$622{\pm}134$, Yudo $583{\pm}89$, Badminton $672{\pm}121$, Base-ball $714{\pm}97$, Soccer $579{\pm}89$, Hand-ball $507{\pm}69$, Basket-ball $628{\pm}133$, Volley-ball $597{\pm}144$(Table 2, Fig.3). 4) Breath holding time : (sec., $M{\pm}S.D$) Running shows $64{\pm}18.8$, Swimming $81{\pm}23.0$, Cycle $54{\pm}13.6$, Taekwondo $55{\pm}11.8$, Wrestling $78{\pm}12.5$, Boxing $63{\pm}9.6$, Yudo $71{\pm}14.4$, Badminton $62{\pm}9.8$, Base-ball $58{\pm}8.9$, Soccer $65{\pm}10.9$, Hand-ball $66{\pm}7.6$, Basket-ball $62{\pm}8.8$, Volley-ball $57{\pm}13.4$(Table 2, Fig.4).

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.653-664
• /
• 2013

The design of computer-based instrumentation and control (I&C) systems is determined by the allocation of I&C functions to I&C systems and components. Due to the characteristics of computer-based technology, component failures can negatively affect several I&C functions, so that the reliability proof of the I&C systems requires the accomplishment of I&C system design analyses throughout the I&C life-cycle. On one hand, this paper proposes the restructuring of the sequential IEC 61513 I&C life-cycle according to the V-model, so as to adequately integrate the concept of verification and validation. On the other hand, based on a metamodel for the modeling of I&C systems, this paper introduces a method for the modeling and analysis of the effects with respect to the superposition of failure combinations and event sequences on the I&C system design, i.e. the temporal change of physical structure is analyzed. In the first step, the method is concerned with the modeling of the I&C systems. In the second step, the method considers the analysis of temporal change of physical structure, which integrates the concepts of the diversity and defense-in-depth analysis, fault tree analysis, event tree analysis, and failure mode and effects analysis.

• Journal of the Korea Convergence Society
• /
• v.13 no.2
• /
• pp.85-91
• /
• 2022

As emphasized in the COVID-19 quarantine guidelines, hand washing is the most important prevention rule in tandem with distancing and mask. This study aimed to confirm relevant factors that affect practice of hand washing to find out approach for improvement of hand washing practice rate after COVID-19. Using the 2020 Community Health Survey data. As methods of research, this study searched for relevance by carrying out univariate logistic regression analysis, and also conducted multivariate logistic regression analysis using significant variables. Analysis results show that hand washing practice rate was high in females, well-educated, low age, cities, office job, the more people wear a face mask indoors, the higher the cycle of ventilation, the higher the cycle of disinfection and the more people maintain healthy distance. This study understood factors related to the rate of hand washing practice and results can be used as basic data for COVID-19 quarantine guidelines.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.147-159
• /
• 1995

This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.