• 한국결정성장학회지
• /
• 제9권6호
• /
• pp.597-600
• /
• 1999

단결정규소 웨이퍼를 15% HF-에탄올 용액에서 양극 산화시켜 다공질규소를 얻는 과정에서 전류밀도와 에칭시간에 따라 굴절률이 주기적으로 변하는 다층의 다공질규소층(porous silicon multilayers)을 구현하였다. 그리고 다층의 다공질규소층(I), 다공질규소 발광층, 또 다른 다층의 다공질규소층(II)의 순으로 구성된 porous silicon microcavity(PSM)를 제작하고 그 물성을 조사하였다. PSM 상하에 위치한 다층의 다공질규소층의 단면을 AFM(Atomic Force Microscope)으로 조사한 결과 고굴 절률과 저굴절률이 주기적으로 교차하는 층이 균일하게 형성되었으며, 중앙의 다공질규소 발광층도 균일하게 나타났다. 다층의 다공질규소층 및 다공질규소 발광층의 두께를 각각 실효파장의 1/4배 및 2배가 되도록 하였을 때 특정파장의 필터로 쓰일 수 있는 브래그 반사경(Bragg reflector)의 특성이 나타났다. 또한 PSM의 발광 스펙트럼은 그 반치폭이 현저히 감소하고 발광의 세기가 크게 증가되는 경향을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.111-118
• /
• 2002

A new lithium niobate optical modulator with a polymer buffer layer on Ni in-diffused optical waveguide is proposed for the fist time, successfully fabricated and examined at a wavelength of 1.3 mm. By determining the diffusion parameters of Ni in-diffused waveguide to achieve more desirable mode size which is well matched to the mode in the fiber, the detailed results on the achievement of high optical throughput are reported. In addition, the usefulness of polymer buffer layer which can be applicable to a buffer layer in Ni in-diffused waveguide devices is demonstrated. Several sets of channel waveguides fabricated on Z-cut lithium niobate by Ni in-diffusion were obtained and on which coplanar traveling-wave type electrodes with a polymer-employed buffer layer were developed by a conventional fabrication method for characterizing of electro-optical performances of the proposed device. The experimental results show that the measured half-wave voltage is of ~10 V and the total measured fiber-to-fiber insertion loss is of ~6.4 dB for a 40 mm long at a wavelength of =1.3 mm, respectively. From the experimental results, it is confirmed that the polymer-employed buffer layer in LiNbO3 optical modulator can be a substitute material instead of silicon oxide layer which is usually processed at a high temperature of over $300^{\circ}C$. Moreover, the fabrication tolerances by using polymer materials in LiNbO3 optical modulators are much less strict in comparison to the case of dielectric buffer layer.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.93-99
• /
• 2016

The extraction efficiency depending on the extracting methods and the conditions of extraction was investigated. The common steam extraction was compared to the distillation extraction method. The effects of the samples size and the extraction time on the extract yield were also investigated by using UV-Vis spectrophotometer. One of the functional components of pine needle extract as the natural phenol base components were detected by the UV-VIS at around 235 nm wavelength range. The absorbance intensity at around 235 nm wavelength of the pine needle extract was used as the indicator of the extraction efficiency in this experiment. The distillation extraction showed the higher extract yield than the steam extraction. The grinding treatment of pine needles also resulted in the better extract performance, but the severe grinding showed a little decrease in the extract yield especially in case of the distillation extraction method. More than half of the extract was collected at the first stage of the extraction, that was the first 15 minutes in the total 60 minutes extraction.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1627-1627
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M^{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima t and the variation of full width at half maximum w were strongly dependent on the detection position and the wavelength of the laser beam. At, t and w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1626-1626
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M_{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima $\Delta$t and the variation of full width at half maximum Δw were strongly dependent on the detection position and the wavelength of the laser beam. At, $\Delta$t and $\Delta$w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• 한국수산과학회지
• /
• 제44권4호
• /
• pp.413-422
• /
• 2011

An improved split-beam transducer for a 50 kHz fish-sizing echo sounder was developed. The main objective of this study was to minimize the side lobe level in the beam pattern and the distance between acoustic centers for adjacent transducer quadrants in the geometrical arrangement of array elements while maintaining a given number of transducer elements and beam width. To achieve these goals, a 32-element planar array transducer ($6{\times}6$ array with one element in each corner missing) was designed using the Dolph-Chebyshev shading function to suppress side lobes in the array beam pattern and fabricated by arranging the inter-element spacing to be substantially equal to half the wavelength using the transducer element of 0.4 times the wavelength in diameter. The performance characteristics of this split-beam transducer were evaluated in the experimental water tank of $5m{\times}5m{\times}6m$ (length${\times}$height${\times}$width). In this study, the design goal of the beam width and side lobe level for transmitting a beam pattern was initially set at $21^{\circ}$ and -30 dB, respectively. However, the measured beam width at 3 dB was $21^{\circ}$ in both directions with side lobe levels of -24.7 dB in the horizontal plane and -25.6 dB in the vertical plane. The averaged beam width at -3 dB of the receiving beam patterns for four receiving quadrants was $31.4^{\circ}$. The transmitting voltage response was 161.5 dB (re $1{\mu}Pa$/V at 1 m) at 50.23 kHz with a bandwidth of 2.16 kHz, and the averaged receiving sensitivity for four receiving quadrants was -178.13 dB (re 1 V/${\mu}Pa$) at 49.8 kHz with a bandwidth of 2.64 kHz.

• Journal of Pharmaceutical Investigation
• /
• 제35권1호
• /
• pp.51-55
• /
• 2005

A high-performance liquid chromatographic method was employed for the determination of bumetanide in human plasma. After addition of internal standard (IS, naproxen) and acidification of the plasma with 1 M hydrochloric acid, the drug and IS were extracted into dichloromethane. The organic phase was back-extracted into 1 M sodium bicarbonate solution and 50 ${\mu}l$ of the aqueous phase was injected onto a reversed-phase C18 column with a mobile phase consisting of methanol: water: glacial acetic acid = 65 : 35 : 1. The samples were detected utilizing a fluorescence detector (excitation wavelength 235 nm, emission wavelength 405 nm). The method was specific and validated with a lower limit of 5 ng/mL. Intra- and inter-day precision and accuracy were acceptable for all quality control samples including the lower limit of quantification. The applicability of the method was demonstrated by analysis of plasma after oral administration of a single 2 mg dose to 24 healthy subjects. From the plasma bumetanide concentration vs. time curves, the mean AUC was $246.5{\pm}73.8\;ng{\cdot}hr/mL$ and $C_{max}$ of $132.1{\pm}40.9$ ng/mL reached 1.2 hr after administration. The mean biological half-life of burnet ani de was $1.1{\pm}0.2$hr. Based on the results, this simple and validated assay method could readily be used in any pharmacokinetic or bioequivalence studies using humans.

• 한국항행학회논문지
• /
• 제22권3호
• /
• pp.240-245
• /
• 2018

전체 광 중계 구간 모두 불규칙한 분산 계수를 갖는 단일 모드 광섬유와 분산 보상 광섬유 (DCF; dispersion compensating fiber)를 이용한 융통적인 분산 제어 링크 구조를 제안하였다. 링크의 융통적 구성은 각 전송 반 구획에서 DCF의 분산 계수를 기준으로 이들을 인위적으로 분포시켜서 가능하게 하였다. 광 위상 공액기 전의 전송 반 구획에서는 DCF의 분산 계수를 점진적으로 증가시키고, 광 위상 공액기 다음의 전송 반 구획에서는 DCF의 분산 계수를 점진적으로 감소시키는 'AD' 분포에서 왜곡된 파장 분할 다중(WDM; wavelength division multiplexed) 신호가 최상으로 보상되는 것을 확인하였다. 따라서 왜곡된 WDM 채널의 보상 효과를 더욱 증가시키기 위해서는 광섬유의 길이, 중계 구간 당 잉여 분산뿐만 아니라 광섬유의 분산 계수에 상관없이 'AD' 분포를 선택할 필요가 있다는 것을 확인하였다.

• 한국전자파학회논문지
• /
• 제22권6호
• /
• pp.654-660
• /
• 2011

본 논문에서는 파장에 비해 작은 원형 개구를 통한 전자파 투과를 고려하였다. 무한 도체판의 개구에 대해 수직으로 평면파가 입사될 때 투과 문제를 모멘트 방법으로 풀었다. 투과된 전력과 개구로부터의 복사 패턴에 대한 결과들로부터 파장에 비해 작은 원형 개구, 리지가 장하된 원형 개구 및 반 파장 슬롯의 투과 특성을 비교하였다. 그리고 이론 연구의 타당성을 검증하기 위해 FPCB상에 제작된 개구의 투과 특성을 실험하였으며, 그 결과 시뮬레이션 결과들과 잘 일치함을 관찰하였다.

• 지구물리와물리탐사
• /
• 제9권2호
• /
• pp.148-154
• /
• 2006

소규모 천부 불균질대가 레일리파의 전파 및 분산특성에 미치는 영향에 대해 알아보기 위해 반무한 균질 매질과 2층 층서구조상의 소규모 천부 불균질대를 상정하고 이 불균질대의 심도, 규모 등을 변화시키면서 레일리파의 전파양상과 분산특성에 대해 고찰하였다. 불균질대의 크기가 최소파장을 기준으로 한파장 이상의 경우 레일리파의 분산 현상이 확인되었으며 이러한 현상은 불균질대의 크기가 클수록 커지며 심도가 깊어질수록 작아지고 심도와 수직적 크기변화보다는 수평적 크기변화에 더 민감한 것을 확인하였다. 분산으로 인한 위상속도의 변화 양상은 불균질대의 크기가 일정정도 이하일 경우에는 탄성파 기록상에서는 확인하기 어려우나 분산된 레일리파의 반사 및 투과 이벤트와 그로 인한 진폭변화를 통해 불균질대 존재 여부를 확인하는 지시자로 사용될 수 있을 것으로 판단되며 이런 결과는 소규모 불균질대나 공동탐지를 위한 현장탐사나 새로운 해석방법 개발에 있어 한 지침을 제공할 것으로 기대된다.