• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.405-411
• /
• 2012

This paper deals with direct torque control of an induction motor (IM) with constant switching frequency. The desired torque is obtained from the speed controller which is designed using the IP controller. Decoupling control of torque and flux is developed based on the energy model of IM using the IP controller strategies. The desired d-axis and q-axis stator voltage components are obtained from the designed controller, which decouples torque and flux. The constant switching frequency can be applied using space-vector pulse width modulation, since the desired stator voltage can be known from the decoupling torque and flux controllers. In order to achieve stable operation of the proposed IP controllers, the gains of the controllers are chosen by setting the poles in negative (left) half of s-plane and by choosing the rising time for the response of the step function. The proposed controller was verified in simulations using Matlab/Simulink and results have proven excellent performance. It was found that the proposed IP controllers can provide excellent performance to track the desired torque and speed and to reject the disturbance of load.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1369-1375
• /
• 2006

In this work, mechanical characteristics of stainless steel diaphragm have been studied as a potential robust substrate and a diaphragm material for micromachined devices. Lamination process techniques combined with traditional micromachining processes have been adopted as suitable fabrication technologies. To illustrate these principles, capacitive pressure sensors based on a stainless steel diaphragm have been designed, fabricated and characterized. The fabrication process for stainless steel micromachined devices keeps the membrane and substrate being at the environment of 8.65MPa pressure and $175^{\circ}C$ for a half hour and then subsequently cooled to $25^{\circ}C$. Each sensor uses a stainless steel substrate, a laminated stainless steel film as a suspended movable plate and a fixed, surface micromachined back electrode of electroplated nickel. The finite element method is adopted to investigate residual stresses formed in the process. Besides, out-of-plane deflections are calculated under pressures on the diaphragm. The sensitivity of the device fabricated using these technologies is 9.03 ppm $kPa^{-1}$ with a net capacitance change of 0.14 pF over a range 0$\sim$180 kPa.

• 천문학회보
• /
• 제40권2호
• /
• pp.30.3-31
• /
• 2015

We present a kinematic analysis of 172 likely member galaxies of the Ursa Major Cluster. In order to understand the dynamical state of the cluster, we investigate the correlation of the cluster morphology with rotation, the velocity dispersion profile, and the rotation amplitude parallel to the global rotation direction. Both the minor axis and the rotation are very well-aligned with the global rotation axis in the outer region at half radius (> 0.5 $R_{max}$), but not in the inner region. The cluster exhibits low velocity dispersion and rotation amplitude profiles in the inner region, but higher in the outer. Both profiles exhibit outwardly increasing trends, suggesting an inside-out transfer of angular momentum of dark matter via violent relaxation, as revealed by a recent off-axis major-merging simulation. From Dressler-Schectman plots in the plane of galactic positions, and velocity versus position angle of galaxy, we are able to divide the Ursa Major Cluster into two substructures: Ursa Major South (UMS) and Ursa Major North (UMN). We derive a mass of $3.2{\times}10^{14}M_{\odot}$ for the cluster through the two-body analysis by the timing argument with the distance information (37 for UMN and 36 for UMS) and the spin parameter of ${\lambda}=0.049$. The two substructures appear to have passed each other 4.4 Gyr ago and are moving away to the maximum separation.

• Tribology and Lubricants
• /
• 제36권3호
• /
• pp.147-152
• /
• 2020

This paper is within the framework of an adhered complete contact problem wherein the contact between a half plane and sharp edged indenter, both of which are elastic in character, is constituted. The eigensolutions of the contact shear and normal stresses, σ_rq and σ_q, respectively, are evaluated via asymptotic analysis. The ratio of σ_rq/σ_qq is investigated and compared with the coefficient of friction, μ, of the contact surface to observe the propensity to slip on the contact surface. Interestingly, there exists a region of |σ_rθ/σ_θθ| ≥ |μ|. Thus, slipping can occur, although the problem is solved under the condition of an adhered contact without slipping. Given that a tribological failure potentially occurs at the slipping region, it is important to determine the size of the slipping region. This aspect is also factored in the paper. A simple example of the adhered contact between two elastically dissimilar squares is considered. Finite element analysis is used to evaluate generalized stress intensity factors. Furthermore, it is repeatedly observed that slipping occurs on the contact surface although the size of it is extremely small compared with that of the contacting squares. Therefore, as a contribution to the field of contact mechanics, this problem must be further explained logically.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.42-47
• /
• 2011

In this paper, wake equalizing duct (WED) form optimization was carried out using computational fluid dynamics (CFD) techniques. A WED is a ring-shaped flow vane with a foil-type cross-section fitted to a hull in front of the upper propeller area. The main advantage of a WED is the power savings resulting from the uniformity of the velocity distribution on the propeller plane, a reduction in the flow separation at the aft-body, and lift generation with a forward force component on the foil section. This paper intends to evaluate these functions and find an optimized WED form for minimizing the viscous resistance and equalizing the wake distribution. In the optimization process, the study uses four WED parameters: the angle of the section, longitudinal location, and angles of the axes for the half rings against the longitudinal and transverse planes of the ship. KRISO 300K VLCC2 (KVLCC2) is chosen as an example ship to demonstrate the WED optimization. The optimization procedure uses genetic algorithms (GAs), a gradient-based optimizer for the refinement of the solution, and Non-dominated Sorting GA-II(NSGA-II) for Multiobjective Optimization. The results show that the optimized WED can reduce the viscous resistance at the expense of the uniformity of the wake distribution.

• 한국전자파학회논문지
• /
• 제25권12호
• /
• pp.1212-1218
• /
• 2014

본 논문은 UWB 대역 중 낮은 대역만을 만족하던 기존 보우타이 모노폴 안테나의 접지 패치 변경을 통한 초광대역화 설계를 제안한다. 기존의 안테나는 반원형 접지 패치를 가진데 반해, 제안된 안테나는 오각형 형태의 접지 패치를 가지도록 설계되어 UWB 대역 전체에서 동작이 가능하다. 측정된 안테나의 반사손실 특성은 4.9~5.8 GHz에서 갖는 저지 대역 외의 3.1~10.6 GHz 에서 -10 dB 이하를 만족한다. 측정된 안테나의 방사패턴은 모노폴 안테나의 방사패턴과 유사한 특성을 지니며, 저지 대역 주파수인 5.8 GHz에서 안테나 이득은 동작 주파수 대비 약 8 dB 감소되었다.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2120-2125
• /
• 2015

In this paper, a rectangular waveguide probe with a ridge-loaded straight slot (RLSS) is presented for a near-field scanning microwave microscope (NSMM). The RLSS is located laterally at the end wall of the cavity and is loaded on double ridges in a narrow straight slot to improve the spatial resolution compared with a straight slot. The probe consists of a rectangular cavity with an RLSS and a feed section of a WR-90 rectangular waveguide. When the proposed NSMM is located at distance of 0.1mm in front of a substrate without patches or strips, the simulated full width at half maximum (FWHM) of the probe improve by approximately 31.5 % compared with that of a straight slot without ridges. One dimensional scanning of the E-plane on a sample under test was conducted, and the reflection coefficient of the near-field scanning probe is presented.

• 대한수학회지
• /
• 제45권3호
• /
• pp.781-794
• /
• 2008

Let $\mathbb{H}_g$ and $\mathbb{D}_g$ be the Siegel upper half plane and the generalized unit disk of degree g respectively. Let $\mathbb{C}^{(h,g)}$ be the Euclidean space of all $h{\times}g$ complex matrices. We present a partial Cayley transform of the Siegel-Jacobi disk $\mathbb{D}_g{\times}\mathbb{C}^{(h,g)}$ onto the Siegel-Jacobi space $\mathbb{H}_g{\times}\mathbb{C}^{(h,g)}$ which gives a partial bounded realization of $\mathbb{H}_g{\times}\mathbb{C}^{(h,g)}$ by $\mathbb{D}_g{\times}\mathbb{C}^{(h,g)}$. We prove that the natural actions of the Jacobi group on $\mathbb{D}_g{\times}\mathbb{C}^{(h,g)}$. and $\mathbb{H}_g{\times}\mathbb{C}^{(h,g)}$. are compatible via a partial Cayley transform. A partial Cayley transform plays an important role in computing differential operators on the Siegel Jacobi disk $\mathbb{D}_g{\times}\mathbb{C}^{(h,g)}$. invariant under the natural action of the Jacobi group $\mathbb{D}_g{\times}\mathbb{C}^{(h,g)}$ explicitly.

• 한국음향학회지
• /
• 제7권4호
• /
• pp.117-126
• /
• 1988

산란된 파동의 형태는 그 산란체의 기하학적 형상 및 위치에 따라 변한다. 본 논문에서는 매질 내에 임피던스를 가지는 무한 실린더가 있는 경우 평면 입사파에 대한 산란된 파동을 유도하였고 그 결과로부터 산란된 파동의 방향성을 나타내는 지표로서 전방 산란파의 peak 값에 대해 산란파의 크기가 반으로 떨어지는 각도를 구하였다. 이 각도를 검토해 본 결과 입사파의 주파수 및 거리에 따라 그 각의 변화가 뚜렷함을 볼 수 있었다. 따라서 매질 내에 어떠한 산란체가 있는 경우 이 각도가 산란체의 위치 및 형상을 추정하는데 유용하게 적용될 수 있을 것이라 생각된다.

• 한국전산구조공학회논문집
• /
• 제16권3호
• /
• pp.271-280
• /
• 2003

본 논문에서는 유연한 철제와 목조 지붕구조체를 가진 1/2 축소 전단벽 건물의 진동대 실험결과를 이용한 성공적인 구조물의 재해석과 선형ㆍ비선형 동적특성을 연구하기 위한 해석모델링 방법에 대해서 연구하였다. 대상 건물은 유연한 지붕구조체와 4개의 보강조적조 전단벽으로 구성되어 있다. 유연한 지붕구조체의 동적특성 때문에 다자유도 모델을 사용하였으며, 다수의 선형 및 비선형 동적해석을 실행하기 위하여 구조물의 자유도를 단순화하였다. 각각의 구조부재의 이력특성과 재료특성 그리고 동적해석을 수행하기 위한 주요 구조변수의 적절한 설정 방법에 대하여 고찰하였다.