• Journal of the Korean Data and Information Science Society
• /
• 제21권5호
• /
• pp.901-908
• /
• 2010

다중회귀모형에서 변수선택법 중에서 전진선택과 후진제거의 과정을 기하학적으로 표현하는 그래픽적 방법을 제안한다. 반지름이 1인 반원의 제1사분면에는 전진선택 과정을, 제2사분면에는 후진제거 과정을 표현한다. 각 단계에서 회귀제곱합을 벡터로 표현하고, 추가제곱합 또는 부분결정계수를 벡터 사이의 각도로 나타내며 벡터의 끝을 연결할 때 통계적으로 유의하면 점선으로 표현하여 부분가설검정의 통계적 분석결과를 인지할 수 있도록 작성한다. 이 방법을 이용하면 전진선택과 후진제거 방법에 의한 최종모형을 비교 분석하고 전체적으로 모형의 적합도를 파악할 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.675-680
• /
• 2006

This is a study of fatigue strength of weld deposits with transverse cracks in plate up to 50 mm thick. It is concerned with the fatigue properties of welds already with transverse cracks. A previous study of transverse crack occurrence, location and microstructure in accordance with welding conditions was published in the Welding Journal (Lee et al., 1998). A fatigue crack develops as a result of stress concentration and extends with each load cycle until fatigue occurs, or until the cyclic loads are transferred to redundant members. The fatigue performance of a member is more dependent on the localized state of stress than the static strength of the base metal or the weld metal. Fatigue specimens were machined to have transverse cracks located on the surface and inside the specimen. Evaluation of fatigue strength depending on location of transverse cracks was then performed. When transverse cracks were propagated in a quarter-or half-circle shape, the specimen broke at low cycle in the presence of a surface crack. However, when the crack was inside the specimen, it propagated in a circular or elliptical shape and the specimen showed high fatigue strength, enough to reach the fatigue limit within tolerance of design stresses.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.667-674
• /
• 2015

This paper describes the development of a prototype hexapod robot with six circular legs to overcome a variety of challenging terrains. The legs of the robot are very important for stability during walking, which are analyzed for determining the optimal design parameters through CAE tools. Its control system consists of three types of sensors, microprocessors, and communication modules for PC interface. The entire operation of the robot can be controlled and monitored using a PC. The experimental operations for three different roads verified the feasibility of the prototype robot for carrying out reconnaissance on multi terrain. In the near future, the prototype robot can be used for a military purpose of detecting and informing a potential risk in advance.

• 한국의류학회지
• /
• 제47권2호
• /
• pp.215-231
• /
• 2023

This study classifies short front long back skirts from the Joseon Dynasty by style type, identifies their formative characteristics based on their external morphological properties and internal composition, and examines their correlation with Korean thought. A literature review and empirical research were conducted for this study. The style of short front long back skirts is classified as inverted "b"-shaped, lower lip, wavy, trapezoid with a raised center hem, or half-circle. As such, this skirt possesses the formative properties of imbalance, variability of shape, intentional three-dimensionality, and confluence. In other words, with an imbalance resulting from the difference in length between the front and back, these skirts are characterized by variability in shape created by intentional three-dimensionality expressed as intentional three-dimensional beauty, the confluence of planes and dimensions, as well as of materials and colors. These properties are correlated with Korean ways of viewing the world. This study contributes to the development of Korean designs.

• 한국환경농학회지
• /
• 제20권4호
• /
• pp.238-243
• /
• 2001

본 연구에서는 소형 퇴비화 용기의 최적 조건에서 미생물이나 퇴비화 보조제를 첨가하지 않고 가정에서 발생되는 음식물쓰레기를 매일 1 kg씩 투입하여 퇴비화를 진행하였다. 실험결과를 요약하면 다음과 같다; 퇴비화 진행과정 중 수분함량은 $51.04{\sim}53.45%$로 유지되었다. 질소는 퇴비화 진행과정에서 산화되어 암모니아성 질소 및 아질산성 질소로서 검출되지 않았다. Hemicellulose, Lignin은 시간의 경과에 따라 뚜렷한 경향을 나타내지 않았으나, Cellulose는 점차 감소하는 것으로 나타났다. 중금속의 함량은 Cu, Cd, Pb, Hg, As는 검출되지 않았고 Cr은 $9.8{\sim}13.8$ mg/kg으로 부산물 비료의 기준치 300 mg/kg보다 낮았으며, Zn은 $25{\sim}100$ mg/kg이었다. 무기성분은 $P_2O_5$ $1.32{\sim}1.71%$, CaO $1.29{\sim}1.48%$, MgO $0.41{\sim}0.49%$, $K_2O$ $0.38{\sim}0.74%$로 퇴비화 과정 중 큰 변화가 없었다. 20일 동안 퇴비화한 후 무게 감소율은 습윤 기준 67.5%, 분해율은 48%이었다. 배출된 퇴비의 숙성도는 3등급이었다.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8901-8907
• /
• 2015

기존의 가로등은 배광특성 조절이 어려워 주변 환경 및 도로의 상황에 따라 빛을 고루 전달하지 못하므로, 눈부심, 농작물 결실저해 및 수면 방해 등의 광공해를 발생시키고 있는 실정이다. 본 논문에서는 이러한 문제를 해결하기 위해 주변 환경 및 도로 상황에 따라 조사되는 빛의 각도를 조절할 수 있는 새로운 구조의 LED 가로등 기구를 제안 하였다. 제안된 LED 가로등 기구는 반원구조의 형상을 갖는 각도 조절 장치를 이용하여 도로의 종류 및 특성에 따라 배광특성을 조절 할 수 있도록 하였다. 측정 및 모의실험결과 배광각도는 최소 $100^{\circ}$에서 최대 $154^{\circ}$까지 조절이 가능함을 확인하였고, 평균조도는 KS 규정의 15%를 초과하였으며, 종합 균제도는 KS 규정의 50% 이상을 초과하여 성능이 우수함을 확인할 수 있었다. 따라서 본 연구를 통하여 개발된 대용량 LED 가로등 기구는 광공해를 해소하고 광원 분포의 균제도 최적화와 눈부심을 최소화 할 수 있을 것으로 사료된다.

• 한국산림과학회지
• /
• 제103권2호
• /
• pp.248-257
• /
• 2014

이 연구는 풍도목 근분의 구조형태적 특성을 파악하고, 풍향에 대응하는 수목뿌리의 발달 특성 및 수목의 지상부와 지하부 특성 간의 상관관계를 분석하고자 하는 목적으로 수행되었다. 이를 위해서 서울대학교 태화산 학술림에서 발생한 77 그루의 낙엽송과 24 그루의 잣나무 풍도목의 근분에 대한 현장조사를 실시하였다. 근분의 형태적 특성을 조사한 결과, 풍도목 근분은 타원형 혹은 원형의 평면형을 보이며, 측면에서 살펴보면 반 타원체의 형태를 보였다. 또한, 근분 내 뿌리의 발달 특성을 조사한 결과, 평균적으로 수목의 전도 방향에서 비전도 방향보다 뿌리의 개수가 더 많고, 뿌리 표면적이 더 큰 것으로 나타났다. 또한, 수목의 지상부와 지하부 특성 간의 선형상관관계를 조사한 결과, DBH는 수고보다 근분 크기와 뿌리 표면적에 대해 상대적으로 강한 선형적인 상관관계를 보였다. 이러한 상관관계 분석 결과를 토대로 상관관계가 뚜렷한 수목 지상부와 지하부 특성 간의 단순선형회귀식을 수립하였다.

• Archives of Plastic Surgery
• /
• 제33권6호
• /
• pp.715-722
• /
• 2006

Purpose: The main advantages of the perforator flap are minimal donor site morbidity, preservation of any main source artery and its thin characteristics. Most perforator flaps for hand reconstruction need primary and secondary procedures such as a flap debulkiness and liposuction etc. However, flap thickness of calf area is thinner than any other perforator flaps. Methods: We performed an anatomical study and clinical application of medial sural artery perforator flap. We found that there are two or more medial sural perforators located on a straight line drawn from the mid-point of popliteal crease to the mid-point of medial malleolus. Most pathway of medial sural artery comes along with this line. It is possible to observe the first perforators almost exactly 8 cm from midpoint of popliteal crease in a distal half circle drawn with a radius of 2 cm. Results: We report 12 cases in 11 patients of hand reconstruction with medial sural perforator free flap from Febrary 2003 to Febrary 2006. Complete healing was possible in 11 cases. Total flap loss for venous insufficiency was in 1 patient. During the follow-up, good contour and full range of motion was observed on hand reconstruction with medial sural perforator free flap. Conclusion: In the authors' experience, this anatomical study made it possible to prepare a diagram of the exact location of the medial sural perforators. This flap can be used to achieve acceptable functional and aesthetic results for hand reconstruction because of its thin characteristics.

• 한국의류학회지
• /
• 제41권5호
• /
• pp.783-795
• /
• 2017

This study measured consumer's recognition, reliability, emotion and images about current eco-marks as well proposed an eco-mark rating scale and mark designs to improve consumer's trust on the fashion product marks. We used a questionnaire survey to collect data from 150 persons about knowledge, interests, and practice on eco fashion products in relation to trustfulness and positive images for three domestic and three international eco-marks. We evaluated and gave eco scores to six fiber-type products (cotton, organic cotton, wool, polyester, biodegradable polyester and nylon) in terms of consumer's use, water & land consumption, waste amount, carbon footprint, and toxicity. We suggested a new 5-level rating scale for eco marks, which quantified the concept of environmental friendliness of fiber products. The design for eco-mark of rating scale showed the total grade with two sub scores of environmental sides and human sides developed with an improved visual understanding for consumers. The design is one through benchmarking the energy-consumption efficiency mark, which is familiar to consumers such as a half circle shape to save environment resources to alarm consumers to environment problems.

• 한국자동차공학회논문집
• /
• 제2권1호
• /
• pp.9-25
• /
• 1994

In the present study, the Reynolds-averaged Navier-Stokes equations, together with the equations of the $k-{\varepsilon}$ model of turbulence, were solved numerically in a general body-fitted coordinate system for three-dimensional turbulent flows around the six basic shapes of the magnetically levitated train(MAGLEV). The numerical computations were conducted on the MAGLEV model configurations to provide information on shapes of this type very near the elevated track at a constant Reynolds number of $1.48{\times}10^{6}$ based on the body length. The coordinate system was generated by numerically solving a set of Poisson equations. The convective transport equations were discretized using the finite-analytic scheme which employed analytic solutions of the locally-linearized equations. A time marching algorithm was employed to enable future extensions to be made to handle unsteady and fully-elliptic problems. The pressure-velocity coupling was treated with the SIMPLER-algorithm. Of particular interests were wall effect by the elevated track on the aerodynamic forces and flow characteristics of the six models calculated. The results indicated that the half-circle configuration with extended sides and with smooth curvature of sides was desirable because of the low aerodynamic forces and pitching moment. And it was found that the separation bubble was occured at wake region in near the elevated track.