• 한국진공학회지
• /
• 제8권4A호
• /
• pp.470-475
• /
• 1999

ZnS and ZnTe epilayers were grown on GaAs(100) GaP(100) substrates by hot-wall eitaxy. X-ray diffraction revealed that the epilayers have zinc-blende structure and were grown in (100) direction. The small values of the full width at half maximum (FWHM) of double crystal rocking curve (DCRC) showed high quality of the epilayers. From the thickness dependence of the FWHM of DCRC, the strain remaining in films is found to be due to the thermal expansion difference as well as due to the lattice mismatch.

• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.966-971
• /
• 1988

AES was used to study oxygen adsorption due to the oxygen exposure at 300\ulcorner temperature and segregation of impurities due to annealing on polycrystal copper surface. The intensity of peak of CuM2, 3VV and CuL3 VV increased with annealing time and the peak of CKLL increased after Ar ion bombardment. The effect of oxygen adsorption on copper surface at 300\ulcorner was verified by the decreased of peak of CuM2, 3VV and CuL3 VV as oxygen exposure increase. The binding energy of copper atoms gradualy shifts from 0.7eV to 1.5eV of copper atoms gradually shifts from 0.7eV to 1.5eV after a oxygen exposure. After the oxygen exposure, the width at half the height of CuM2, 3VV is larger 2V*C/S by the effect of chemical liaison of the copper aton with oxygen atom.

• Wind and Structures
• /
• 제5권6호
• /
• pp.515-526
• /
• 2002

The wind flow over two-dimensional sinusoidal hilly obstacles with slope (the ratio of height to half width) of 0.5 has been investigated experimentally and numerically. Experiments for single and double sinusoidal hill models were carried out in a subsonic wind tunnel. The mean velocity profiles, turbulence statistics, and surface pressure distributions were measured at the Reynolds number based on the obstacle height(h=40 mm) of $2.6{\times}10^4$. The reattachment points behind the obstacles were determined using the oil-ink dot and tuft methods. The smoke-wire method was employed to visualize the flow structure qualitatively. The finite-volume-method and the SIMPLE-C algorithm with an orthogonal body-fitted grid were used for numerical simulation. Comparison of mean velocity profiles between the experiments and the numerical simulation shows a good agreement except for the separation region, however, the surface pressure data show almost similar distributions.

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.174-177
• /
• 2018

ZnO/Ag/ZnO multilayers were fabricated and their optical properties were investigated in terms of the micro-cavity effect in electroluminescent devices based on colloidal quantum dots. The top and bottom ZnO layers were formed by a sol-gel method while the middle Ag layer was deposited by thermal evaporation. After the fabrication of the ZnO/Ag/ZnO structure, the transmittance increased to 74%. When the oxide/metal/oxide multilayers were applied to quantum dot light-emitting diodes, the color purity was enhanced due to the narrower full width at half maximum.

• 한국군사과학기술학회지
• /
• 제11권5호
• /
• pp.92-98
• /
• 2008

Chaff is one of important devices for heliborne protection from radars and missiles. When we use a chaff for heliborne protection, J/S(jamming signal of chaff vs reflected signal from heliborne) is important factor to analyze a heliborne survive. When the radial angle between missile and heliborne is changed, J/S of missile receiver is changed and jamming effectiveness of chaff is also changed. We calculate the RCS of chaff and heliborne, and compare the returned signals in a half power beam width of receiver antenna. We analyze chaff dispense modes and specially simulate the effectiveness of a dilution mode chaff between missile and heliborne.

• 한국결정성장학회지
• /
• 제5권4호
• /
• pp.408-413
• /
• 1995

초크랄스키 실리콘 기판의 뒷면에 형성된 기계적 손상이 레이저 여기/극초단파 반사 광전도 감쇠법에 의한 소수반송자 재결합 수명 측정에 미치는 영향을 고찰하였다. 기계적손상의 정도는 X-선 이중결정 회절법과 X-선 단면 측정법 및 습식산화/선택적 식각 방법으로 평가하였다. 그 결과, 웨이퍼 뒷면에 가해지는 기계적 손상의 세기가 강할수록 소수반송자 재결합 수명은 짧아지고, 소수반송자 재결합 수명 측정에 영향을 미치는 반치전폭의 임계값은 약13초임을 알 수 있다.

• 한국결정성장학회지
• /
• 제19권6호
• /
• pp.293-297
• /
• 2009

본 연구에서는 p형 단결정 규소 기판을 에칭시켜 다층구조를 갖는 DBR 및 Microcavity 다공질규소를 제작하고, 그 반사율 스펙트럼을 조사하였다. 그 결과 다층구조를 갖는 다공질규소의 반사율 스펙트럼에서 프린지 패턴의 수는 단일층 다공질규소의 경우보다 상대적으로 많았으며, 특정 파장에서 반사율은 90 % 이상으로 나타났다. 그리고 DBR 다공질규소에서 최대 반사율 봉우리의 FWHM 값은 33 nm로 매우 좁게 나타났다.

• 한국통신학회논문지
• /
• 제21권11호
• /
• pp.3012-3023
• /
• 1996

In this paper, we analyze the compression of optical soliton which is obtained by proceeding the optical pulse in FSDD(Fiber with Slowly Decreasing Dispersion) using both NSE(Nonlinear Schrodinger Equation) and GNSE(General Nonlinear Schrodinger Equation) and compare the results. We replace the FSDD with a sequence of fibers having different dispersion values and pompre the results with those obtained in FSDD. It is found that the same results in peak value and FWHM(Full width Half Maximum) can be obtained by replacing FSDD with a sequence of fibers having proper length. We vary the shape of initial pulse which is the input of FSDD and suggest the condition to obtain higher compression rate.

• 한국전기전자재료학회논문지
• /
• 제15권7호
• /
• pp.634-639
• /
• 2002

Using laser ablation technique carbon thin films were deposited on Si(100) substrate as a function of substrate temperature. In this study, the surface morphologic, structural and field emission properties of these carbon thin films were investigated using Raman spectroscopy, scanning electron microscopy, and a diode technique, respectively. With increasing of the substrate temperature, the surface morphologies were changed significantly. Moreover, the intensity of D-band and the full width at half maximum of these bands were dependent on substrate temperatures. As the substrate temperature was increased, the field emission properties were improved. As the result, we find that the field emission properties of the films were changed significantly with the substrate temperature and structural features of carbon than films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2662-2664
• /
• 1999

To improve the current waveform of diode rectifiers, we propose a new operating principle for the voltage diode rectifiers. In the conventional voltage rectifier circuit, relatively large capacitors are used to boost the output voltage, while the proposed circuit uses smaller ones and a small reactor not to boost the output voltage but improve the input current waveform. A circuit design method is shown and confirmed simulation. It explained that compared conventional SPWM inverter with HPWM(Half Pulse-width modulated)Inverter. Proposed HPWM inverter eliminated dead-time by lowering switching loss and holding over-shooting. Output voltage and current of this paper were applied for real air-conditioner.