• Transactions on Electrical and Electronic Materials
• /
• v.9 no.5
• /
• pp.206-208
• /
• 2008

Implantation of metals and ceramics with ions of nitrogen and other species has improved surface properties such as friction, wear and corrosion in numerous industrial applications. In recent years, PCB drills tend to be more minimized increasingly as the electronics components have been more highly accumulated and minimized. Therefore nitrogen ion implantation was performed onto PCB drill (0.15 & 0.3 mm in diameter), in order to investigate mechanical properties of WC-Co cermets surface through Nano-indentation tests. PCB drill was implanted at energy of 70 keV, 90 keV, 120 keV and with the dose range of $1{\times}10^{17}$ and $5{\times}10^{17}\;ions/cm^{2}$. After ion implantation, WC-Co PCB drill bits was tested in actual operating situation to apply cutting tools industry and is concluded that the life time of nitrogen ion implanted PCB drills is one and a half times longer than the unimplanted.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.3
• /
• pp.159-168
• /
• 2003

This pot experiment was conducted in order to find out the effects of boron application($B_{0}$ /; control, $B_1$; 0.2, $B_2$; 2.0,$ B_3$; 6.0, $B_4$; 15.0 B me/pot) on the forage performance of pure and mixed cultures of orchardgrass and white clover. The 2nd part was concerned with the changes in the forage yields and concurrence index. The results obtained are summarized as follows: 1. The optimum boron application($B_2$) generally resulted in the increase of both forage yields, but the effects of boron application on them were different according to the forage species, whether it was a pure or mixed cultures, additional fertilization, and cutting order. The effects of boron application on the forage productivity were more obvious in white clover than in orchardgrass. 2. Owing to the decline of white clover as affected by the application of additional fertilizers, especially N, in the grass-clover mixed cultures, the effects of boron application on the white clover yields showed a numerical inferiority compared with the pure culture. It was recognized that the yield increase and botanical composition of white clover in grass-clover mixed cultures could be regulated by the application of additional fertilizers and boron. 3. The toxic boron application($B_3$ and $B_4$) resulted in a decreased yield of both forages. The yield change of orchardgrass tended to be similar between pure and mixed cultures, whereas it of white clover tended to be more negative in mixed than in pure cultures. 4. With the application of additional fertilizers, especially N, the botanical composition and concurrence index in grass-clover mixed cultures were relatively increased in orchardgrass, and decreased in white clover. The botanical composition of orchardgrass increased from 55% to 75%, whereas it of white clover decreased from 45% in the first half cutting to 25% in the second half cutting, respectively.

• Asian Journal of Turfgrass Science
• /
• v.9 no.4
• /
• pp.293-316
• /
• 1995

Nitrogen fertilization and cutting practice were studied on turfgrasses and cover plants to investigate the possibility of maintaining green color during the growing season. Research also involved the effect of the nitrogen on a few morphological characteristics of leaf performance elements which might give an information to coloration and life-span of turf leaves. Treatments in the first experiment undertaken on pot included one N level: 350kgN /ha applied as compound fertilizer in split applications of one-half in mid-May and the rest both in late June and August, and four spring-summer cuts: late May, late June, late July and late August. The soil filled in pot a moderately well-drained sandy loam. In the second experiment(field observation) leaf length and width, inflorescence and flowering, and color performance were also investigated. With nitrogen fertilizer applied on turfs, desirable turf color was maintained during a period of poor coloration in specific seasons such as mid-summer for cool season grasses and late fall for warm season grasses comparing to the non-treatment. However, this was not stimulated by cutting treatment to nitrogen status existed. Cutting effect on coloration was more remarkable in both Korean lawngrass and Manilagrass than in cool season turfgrasses such as Italian rye-grass, perennial ryegrass and tall fescue. Especially down-slide of leaf color in cool season turfgrasses could he detected in mid-summer /early fall season ranging up to mid-September. In early November as well as mid-September, Italian ryegrass, perennial ryegrass and tall fes-cue retained a high level of green color as followed by nitrogen application and cutting treatment, and little detectable variation of leaf color notation between cool season turfgrasses was obtained. However, Korean la'vngrass and Manilagrass failed to retain the green color until early November. Color notations in cool season turfgrasses investigated early November on the final date of the experiment ranged from 5 GY 3/1 to 4/8 in 'Ramultra' Italian ryegrass, 'Reveile' perennial ryegrass and 'Arid' tall fescue, but those in Zoysiagrasses were 7.5 YR 4/8 in Korean lawngrass and 2.5 y 5 /6 in Manilagrass. Life-span of leaves was shorter in Italian ryegrass, perennial ryegrass and tall fescue than in beth Korean lawngrass and Manilagrass with and without nitrogen application. In general, leaves appeared in early May had a long life-span than those appeared in late April or mid-June. Nitrogen application significantly prolonged the green color retaining period in perennial ryegrass, Italian ryegrass, Korean lawngrass and Manilagrass, and this was contrasted with the fact that there was no prolonged life-span of leaves emerging in early May and mid-June in tall fescue. SPAD reading values in 48 turfs and cover plants investigated in the field trial were increasing until late June and again decreasing till September. Increasing trends of reading value could be observed in the middle of October in most of grasses. On the other hand, clovers and reed canarygrasses did not restore their color values even in October. Color differences between inter-varieties, and inter-species occurred during the growing season under the field condition implicated that selection of species and /or cultivars for mixture should be taken into consideration. In Munsell color notation investigated in the final date in the middle of November, 32 cultivars belonged under the category of 5 GY and 10 cultivars under the category of 7.5 GY. This was implying that most of cool season turfs and cover plants grown in the center zone of Korean Peninsula which are able to utilize for landscape use can bear their reasonable green color by early or mid-November when properly managed. The applicable possibilities of SPAD readings and Munsell color notation to determine the color status of turfgrasses and cover plants used in this study were discussed.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.3-11
• /
• 2008

An experimental investigation was conducted with half-scale representations of the reinforced concrete shear walls with the opening subjected to cyclic loads. Specimens were half scale representations of a one-story wall in the apartment built in 1980. The area ratio of the opening section, as well as the size and critical section of coupling slabs, were decided based on results from a previous researches. The test result of WS-0.23 specimen, which has artificial damages to install the opening, the strength of the wall decreased due to the opening. It is apparent that influence of cutting reinforcing bars and decrease of effective section area lead to early first yield of the reinforcing bars before the allowable limit of drift ratio of the shear walls was reached. Therefore, proper reinforcing method is needed to prevent this. The decrease of strength of the shear walls by installation of openings shows a great deal of difference compared to previous researches. This is because flexural capacity of the slabs is working as coupling elements for the shear walls. The critical section of coupling slabs that works as coupling elements for shear walls was a little different from the results of previous researches.

• Korean Journal of Oriental Medicine
• /
• v.12 no.3 s.18
• /
• pp.101-115
• /
• 2006

The purpose of this study was to introduce the differential standard of the types of Angelicae Pubescentis Radix. We established the classificatory standard according to the external and internal morphology and the physicochemistrical pattern for the four types of Aucklandiae Radix. The results follow: 1. At the external shape, Angelica pubescens f. biserrata has rising lenticel and dark brown surface, Its section is light gray and its xylem is yellow gray. Aralia continentalis has big stem mark in upper portion, its section has no dense tissue with yellow gray. Heracleum hemsleyanum has dark brown surface and little lenticel, its cortical layer is white yellow and xylem is isabella and powdered. 2. At the internal shape, Angelica pubescens f. biserrata has phloem with half of the root and rare vessel. Aralia continentalis has phloem with two-thirds of the root and it has broad cutting and putting vessel that formed 1-2 row. Heracleum hemsleyanum also has phloem with half of the root and wide scattered latex tube and many large vessel. 3. At the TLC pattern, Heracleum hemsleyanum has remarkable dark spot at $R_{f}$ 0.23 on the sulphuric acid color pattern test, but others have faint. 4. At the HPLC pattern, all samples have generally patterns. But Angelica pubescens f. biserrata shows diminutive continentalic acid content and the peak at Rt 20.278min comes out on Heracleum hemsleyanum, but do not come out on Aralia continentalis and Angelica pubescens f. biserrata. Heracleum hemsleyanum has remarkable peak at Rt 20.278min, but shows no peak at Rt 29.023min unlike Aralia continentalis or Angelica pubescens f. biserrata. Also Aralia continentalis and Angelica pubescens f. biserrata show one remarkable peak at Rt 29.023, but Heracleum hemsleyanum do not show. Consequently, Aralia continentalis and Angelica pubescens f. biserrata are comparable whit continentalic acid content and Heracleum hemsleyanum is comparable with the peak at Rt 20.273 and Rt 29.023. So it is thought that content of continentalic acid and the peaks at Rt 20.278 and Rt 29.023 can apply to differentiate a species from other. It is considered the results of this study will be furnished the basis to succeeding studies and it is needed to extensive comparative study for the same genus-degree of relatedness.

• Journal of Korean Society of Forest Science
• /
• v.1 no.1
• /
• pp.12-21
• /
• 1962

Outdoor cuttings studies on two coniferous species, pitch pine and needle fir, have been made at Suwon, Korea extending from March to early May, 1956. The purpose of these studies was to find the effects of ages of parent trees, topophysis, dilute hormone solution treatments and the time at which the cuttings were collected on the rooting response of the cuttings. On September 2, rooting results were examined. Pitch Pine (Pinus rigida) The total of 1335 cuttings were collected from 3- and 10-year old trees. The cuttings treated were planted on March 13 and April 20. 1. In the cuttings collected from 3-year-old seedlings, the best result (34 percent rooted) was obtained by treating ends of cuttings with a mixture of 50 ppm IBA and 50 ppm NAA. 2. No rooting was observed in lammas shoots. 3. The cuttings from 3-year-old seedlings gave better rooting than those from 10-year-old trees. 4. The root origins were developed from the lower part of the cutting and the cut surface. Needle fir (Abies holophylla) One hundred twenty-five cuttings were collected from a 30-year-old tree. The cuttings treated with any one of four mixed hormone solutions were planted on March 23. 1. Fifteen cuttings out of 75 cuttings from the lower half of the crown were rooted. The cuttings obtained from the upper half of the crown did not root at all. 2. The cuttings treated by the hormone solution made up of 20 ppm IAA, 20 ppm IBA, 20 ppm NAA, 20 ppm thiamine and 5 percent sucrose gave the best rooting (22 percent). 3. All roots originated from callus tissues and irregularly arranged parenchymatous tissues near the cut base.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5419-5424
• /
• 2014

A weld scallop is a small quadrant or half circle type hole installed in the weld line cross area for easy welding operation. Many types of T-bars with a scallop can be welded in a block assembly stage in shipbuilding. The difficulties arise from the fact that scallops are to be filled by build-up welding after welding of the cross line is complete. In this study, a non-scallop block joint welding method was developed using special type CBM (ceramic backing material). The wedge shaped CBM was devised to insert a CBM into just the V groove of weld line cross area without weld scallop. A saw-toothed shape was adopted for easy cutting of the unnecessary part in the CBM fitting process. The applicability of the developed method was verified through welding experiments based on the yard welding conditions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.167-189
• /
• 1992

Frictional heat produced by cutting tools during dental implantation procedure may destroy the surrounding bone tissue and regenerative capacity and interfere ossointegration by formation of undifferentiated connective tissue. To study the effect of frictional heat according to various rotational speeds on the regenerative capacity of surrounding bone tissue, 13 ITI HS implants (8 mm) were inserted at 4 mongrel dogs. Temperatures were measured using thermocouple located 6 mm below from the marginal crest and 0.5 mm from the periphery of trephine mill during implant bed preparation. After 4 and 9 months, animals were sacrificed and specimens were examined using x-rays and light microscope. Results were as follows: 1. With drill speeds of 300, 800, 2,000, 3,500 rpm and saline irrigation, temperatures of surrounding bone were decreased from $-2.9^{\circ}\;to\;-1.7^{\circ}C$. Temperature rises of $2.0^{\circ}\;and\;2.1^{\circ}C$ were recorded with a drill speed of 5,000 rpm and irrigation. 2. With drill speeds of 800, 3,500, 5,000 rpm and no irrigation, temperatures of surrounding bone rose from $+1.5^{\circ}\;to\;+6.8^{\circ}C$, but maximum temperature was $40^{\circ}C$ at 5,000 rpm. 3. On radiographic examination, bone resorptions were observed at the upper half of implant of 5,000 rpm without irrigation and one case of 5,000 rpm with irrigation. 4. Osseointegration was unsuccessful in cases of 3,500, 5,000 rpm without irrigation due to fibrous connective tissue formation to the outer surface and hollow, but it was successful in a case of 800 rpm without irrigation. 5. Osseointegration was successful in cases of 300, 800, 2,000 and 3,500 rpm with irrigation. But fibrous connective tissue formation was observed at the hollow of implant inserted with 5,000 rpm with irrigation.

• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.79-88
• /
• 1996

The purpose of this research was to develop labor-saving cultural practices of cherry tomatoes in the deep flow technique (DFT) by omitting the process of raising seedling. Three cultivars, ‘Pepe’, ‘Pico’ and ‘Koko’ were propagated by the immediate setting of cuttings(lateral shoots) to the culture bed and by setting seedlings obtained by raising cuttings for 15 days, and grown in the standard and half - strength solution. 1. The immediate setting resulted in higher plants, larger number of leaves and larger leaf area during the early growth stage. And the harvest time was hastened by six days in the direct setting than that in the seedling setting. It was also earlier in ‘Pepe’, but not significant by different between two strengths of nutrient solution. 2. The average fruit weight was affected only by cultivars, but not by the type of cutting and the strength of nutrient solution. The highest yields were obtained from the immediate setting of ‘Pepe’ in other cultivars grown in the nutrient solution of standard strength. 3. Brix degree of treated cherry tomato juice was higher in ‘Pepe’ tomato cultured by immediate setting than others.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.2
• /
• pp.196-203
• /
• 2016

In this paper, we propose a virtual surgical planning system specialized to mandible reconstruction surgery. Mandible reconstruction surgery is one of the most difficult surgeries, even for experienced surgeons. Compared to the traditional surgical procedures, virtual surgical planning can reduce the operation time in operating room while expecting better surgical outcome with optimized planning. However, with existing software systems, it requires much time and manual operations in virtual surgical planning. To reduce preparation time and improve accuracy of virtual surgical planning, we have developed optimized functions for virtual surgical simulation of mandible reconstruction with user-friendly interface. We found that the proposed system shortened the preparation time by half compared to the existing system from the experiments. The proposed system supports surgeons to make accurate plan faster and easier. The virtually planned results are used to make surgical cutting guide by 3D printing, and this will enhance surgical performance in operating room.