• 제목/요약/키워드: Hair-pin structure

검색결과 15건 처리시간 0.021초

하이브리드 자동차용 모터 및 인버터 최신 동향 분석 (Recent Progress Trend in Motor and Inverter for Hybrid Vehicle)

  • 김성진;홍승민;남광희
    • 전력전자학회논문지
    • /
    • 제21권5호
    • /
    • pp.381-387
    • /
    • 2016
  • Many efforts have focused on the improvement of power density and efficiency by downsizing the motor and inverter. Recently, Toyota, Honda, and GM realized that the compact-sized motor uses the hairpin structure with increased space factor. Reducing the maximum torque from high-speed technique also makes it possible to design the high-power density model. Toyota and Honda used the newly developed power semiconductor IGBT to decrease conduction loss for high-efficiency inverter. In particular, Toyota used the boost converter to increase the DC link voltage for high efficiency in low-torque high-speed region. Toyota and GM also used the double-sided cooling structure for miniaturization of inverter for high-power density.

임피던스 인버터와 고조파 발진기를 이용한 VCO 설계 및 제작 (Design and Implementation of a VCO Employing Harmonic Oscillators and a Impedance Inverter)

  • 장정석;정연홍;도지훈;김대웅;홍의석
    • 한국ITS학회 논문지
    • /
    • 제8권5호
    • /
    • pp.98-104
    • /
    • 2009
  • 본 논문에서는 Push-Push 구조와 고임피던스 인버터를 이용하여 개선된 VCO를 설계 및 제작하였다. 두 개의 고조파 발진기를 Push-Push 구조로 결합시킴으로써 기본주파수 억압특성을 개선하였으며, 고조파 출력을 향상시켰다. 이에 따른 위상잡음 증가는 고임피던스 인버터를 이용하여 공진기와 병렬선로 사이의 결합특성 개선을 통하여 억제하였다.

  • PDF

진동하는 구를 지 나는 유동의 특성 (Characteristics of Flow p ast an Oscillating Sphere)

  • 이대성;윤현식;하만영
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.284-287
    • /
    • 2008
  • Flow over a sphere under forced oscillation at Re=300 is simulated for various frequency ratios which are defined as excitation frequency over natural frequency of stationary sphere. The results of oscillating sphere are compared with those of stationary sphere and an oscillating cylinder. Detailed vortical structures, hydrodynamic forces and frequencies of the wake are prescribed as a function of frequency ratio. For oscillating sphere, planar symmetry of the wake is kept and two nearly symmetric hair pin vortices are induced by oscillation for one period of oscillation when the frequency ratio is bigger than 0.5. Modulation phenomenon which can be found in an oscillating cylinder were not seen for an oscillating sphere.

  • PDF

능동 위상배열 안테나를 위한 single-stage transmission type ijection-locked oscillator(STILO)의 설계 및 제작 (The single-stage transmission type injection-locked oscillator was designed and fabricated for the active integrated phased array antenna)

  • 이두한;김교헌;홍의석
    • 한국통신학회논문지
    • /
    • 제21권3호
    • /
    • pp.763-770
    • /
    • 1996
  • In this paper, the Single-stage Transmission type Injectiong-Locked Oscillator(STILO) was designed and fabicated for the Active Integrated Phased Array Antenna(AIPAA) system. The STILO, which was designed and fabricated by injection-locked technique and hair-pin resonator, has the same 210MHz frequency tuning range of the Voltage Controlled Oscillator(VCO) used by varactor. The locking bandwidth of STILO with 11.5MHz bandwidth, is much better than that of the Injection-Locked Dielectric Resonator Oscillator(ILDRO), And the STILO has the improved noise characteristics in AM, FM, and PM. This STILO is useful for the AIPAA, the coupled VCO array, an the MMIC structure.

  • PDF

Combline 구조를 이용한 적층 LTCC 대역통과 필터의 설계 및 제작 (Design and fabrication of multilayer LTCC BPF using Combline structure)

  • 안순영;이영신;방규석;김경철;강남기;송희석
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.628-631
    • /
    • 2003
  • In this paper, 2.4 GHz WLAN BPF(Band Pass Filter) using LTCC(Low temperature cofiring ceramic) multilayer technology was simulated and manufactured. A modified ${\lambda}/4$ Hair-pin resonator with shunt-to ground loaded capacitor is used to shorten resonator length and improve circuit Q factor. Proposed BPF has a combline structure. Electro-magnetic Coupling between coupled strip-line resonators is controlled to provide attenuation poles at finite frequencies. The overall size of the filter is $3.2{\times}1.6{\times}1.3mm^3$. The measured result shows good agreement with simulated data.

  • PDF