• PNF and Movement
• /
• v.16 no.3
• /
• pp.441-449
• /
• 2018

Purpose: This study aimed to compare the impact of proprioceptive neuromuscular facilitation leg patterns emphasizing hallux abduction (PNF-LPHA) on the intrinsic foot muscles of participants with hallux valgus (HV) using the toe-spread-out exercise (TSO). Methods: The present study recruited 12 individuals with HV. All the participants voluntarily agreed to participate in the study after hearing explanations of its purpose and process. All participants performed the TSO, PNF-LPHA 1, and PNF-LPHA 2. The participants' abductor hallucis (AbH), adductor hallucis (AdH), extensor hallucis longus (EHL), and flexor hallucis brevis (FHB) activity was measured, and the ratio of AbH:AdH was measured during the three interventions using electromyography. Additionally, the participants' AbH thickness was measured by ultrasonography. An intraclass correlation coefficient (ICC) was used to verify the intra-rater reliability of ultrasonography at rest and during contraction. Results: The intra-rater reliability was excellent at rest and during contraction ($ICC_{3,1}=0.90$ and $ICC_{3,1}=0.83$, respectively). There were no statistically significant differences in the activity of the AbH, the ratio of AbH: AdH, and the thickness of AbH between the TSO and PNF-LPHA2 groups. Additionally, EHL activity was significantly higher in the PNF-LPHA2 group than in the TSOgroup. Conclusion: PNF-LPHA 2 can be recommended as a method to optimize AbH and EHL activity, the ratio of AbH:AdH, and the thickness of AbH in individuals with HV.

• Journal of Technologic Dentistry
• /
• v.41 no.3
• /
• pp.167-175
• /
• 2019

Purpose: This study was investigated the effect of multi-layer zirconia block type and design location on the mechanical properties of zirconia copings. Methods: Three kinds of multi-layered zirconia blocks (Snow princess multi layered block, Multi cherry, Dental zirconia pre-shaded blank) were used to identify the effects of the kinds of multi-layered zirconia blocks, design locations on mechanical characteristics of zirconia copings. 150 Zirconia copings were fabricated and fracture strength, hardness and microstructure were compared and evaluated. Results: Dental zirconia pre-shaded blank(2,256.9N) had the highest fracture strength of zirconia copings on all the design locations, and it was followed by Snow princess multi layered block(2,107.5N) and Multi cherry(917.0N). Snow princess multi layered block(1,949.7Hv) had the highest hardness of zirconia copings on all the design locations, and it was followed by Dental zirconia pre-shaded blank(1,671.7Hv) and Multi cherry(1,383.7Hv). The cervical layer had the highest fracture strength and hardness of zirconia copings in all the blocks, and it was followed by the cervical+gradation layer, the enamel layer, the enamel+gradation layer, and the gradation layer. Conclusion: It was found that the fracture strength and hardness were different according to the kinds of multilayer zirconia block and design location, and it was confirmed that it is lower than the fracture strength of white zirconia.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.728-733
• /
• 2009

Cu based amorphous ($Cu_{54}Zr_{22}Ti_{18}Ni_{6}$) powders were deposited onto Al 6061 substrates by cold spray process with different powder preheating temperatures (below glass transition temperature: $350^{\circ}C$, near glass transition temperature: $430^{\circ}C$ and near crystallization temperature: $500^{\circ}C$). The microstructure and macroscopic properties (hardness, wear and corrosion) of Cu based amorphous coating layers were also investigated. X-ray diffraction results showed that cold sprayed Cu based amorphous coating layers of $300{\sim}350{\mu}m$ thickness could be well manufactured regardless of powder preheating temperature. Porosity measurements revealed that the coating layers of $430^{\circ}C$ and $500^{\circ}C$ preheating temperature conditions had lower porosity contents (0.88%, 0.93%) than that of the $350^{\circ}C$ preheating condition (4.87%). Hardness was measured as 374.8 Hv ($350^{\circ}C$), 436.3 Hv ($430^{\circ}C$) and 455.4 Hv ($500^{\circ}C$) for the Cu based amorphous coating layers, respectively. The results of the suga test for the wear resistance property also corresponded well to the hardness results. The critical anodic current density ($i_{c}$) according to powder preheating temperature conditions of $430^{\circ}C$, $500^{\circ}C$ was lower than that of the sample preheated at $350^{\circ}C$, respectively. The higher hardness, wear and corrosion resistances of the preheating conditions of near $T_{g}$ and $T_{x}$, compared to the properties of below $T_{g}$, could be well explained by the lower porosity of coating layer.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1972-1981
• /
• 2022

A typical ferritic/martensitic (F/M) steel sheet was subjected to pulsed laser surface remelting (LSR) and corrosion test in lead-bismuth eutectic (LBE) at 550 ℃. There present two modification zones with distinct microstructures in the LSRed specimen: (1) remelted zone (RZ) consisting of both bulk δ-ferrite grains and martensitic plates and (2) heat-affected zone (HAZ) below the RZ, mainly composed of martensitic plates and high-density precipitates. Martensitic transformation occurs in both the RZ and the HAZ with the Kurdjumov-Sachs and Nishiyama-Wassermann orientation relationships followed concurrently, resulting in scattered orientations and specific misorientation characteristics. Hardnesses of the RZ and the HAZ are 364 ± 7 HV and 451 ± 15 HV, respectively, considerably higher than that of the matrix (267 ± 3 HV). In oxygen-saturated and oxygen-depleted LBE, thicknesses of oxide layers developed on both the as-received and the LSRed specimens increase with prolonging corrosion time (oxide layers always thinner under the oxygen-depleted condition). The corrosion resistance of the LSRed F/M steel in oxygen-saturated LBE is improved, which can be attributed to the grain-refinement accelerated formation of dense Fe-Cr spinel. In oxygen-depleted LBE, the growth of oxide layers is very low with both types of specimens showing similar corrosion resistance.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.699-706
• /
• 2022

In this study, Directed energy deposition (DED) among additive manufacturing is applied to repair damaged spindle key parts of planner miller. The material of the spindle key is SCM415, and the P21 Powder is used. In order to find the optimal deposition conditions for DED equipment, a single-line deposition experiment is conducted to analysis five parameters. The laser power affects the width, and the height is a parameter affected by coaxial gas and powder gas. In addition, laser power, powder feed rate, coaxial gas, and powder gas are parameters that affect dilution. Otimal deposition is that 400 W of laser power, 4.0 g/min of powder feed rate, 6.5 L/min of coaxial gas, 3.0 L/min of powder gas and 4.5 L/min of shield gas. By setting the optimum conditions, a uniform deposition cross section in the form of an ellipse can be obtained. Damage recovery process of spindle key consists of 3D shape design of the base and deposition parts, deposition path creation and deposition process, and post-processing. The hardness of deposited area with P21 powder on the SCM415 spindle key is 336 HV for the surface of the deposition, 260 HV for the boundary area, and 165 HV for the base material.

• Journal of Powder Materials
• /
• v.29 no.4
• /
• pp.283-290
• /
• 2022

A Cu-15Ag-5P filler metal (BCuP-5) is fabricated on a Ag substrate using a high-velocity oxygen fuel (HVOF) thermal spray process, followed by post-heat treatment (300℃ for 1 h and 400℃ for 1 h) of the HVOF coating layers to control its microstructure and mechanical properties. Additionally, the microstructure and mechanical properties are evaluated according to the post-heat treatment conditions. The porosity of the heat-treated coating layers are significantly reduced to less than half those of the as-sprayed coating layer, and the pore shape changes to a spherical shape. The constituent phases of the coating layers are Cu, Ag, and Cu-Ag-Cu3P eutectic, which is identical to the initial powder feedstock. A more uniform microstructure is obtained as the heat-treatment temperature increases. The hardness of the coating layer is 154.6 Hv (as-sprayed), 161.2 Hv (300℃ for 1 h), and 167.0 Hv (400℃ for 1 h), which increases with increasing heat-treatment temperature, and is 2.35 times higher than that of the conventional cast alloy. As a result of the pull-out test, loss or separation of the coating layer rarely occurs in the heat-treated coating layer.

• Fisheries and Aquatic Sciences
• /
• v.26 no.7
• /
• pp.437-446
• /
• 2023

Cyprinids are popular species for aquaculture worldwide, with Asia being a significant contributor to their production. In Korea, common carp (Cyprinus carpio), koi carp (Cyprinus rubrofuscus), and goldfish (Carassius auratus) are cultivated domestically and imported for ornamental or human consumption purposes. Among the viruses that infect cyprinids, cyprinid herpesvirus-2 (CyHV-2), koi herpesvirus (KHV, also known as cyprinid herpesvirus-3), and carp edema virus (CEV) are of particular concern as they cause substantial economic losses to the aquaculture industry. In this study, we investigated these viruses in both of domestic and imported cyprinids. Our results revealed that CyHV-2 was only detected in imported goldfish from Thailand. To further investigate the genetic characteristics of them, the marker A region was analyzed. Despite belonging to the same cluster with isolates from China, France, Poland, and Israel, CyHV-2 detected in this study showed distinct differences in their repetitive sequence sizes. Furthermore, two different forms of KHV/CEV coinfection were identified from domestic koi carp, both of which exhibited typical symptoms. Phylogenetic analysis showed that one KHV isolate (ScKc-2105-K) was of the Asian type and closely related to isolates from Japan, Indonesia, Belgium, Taiwan, and China. Two CEV isolates (ScKc-2105-CE and GhKc-2207-CE) be- longed to the IIa type and showed high similarity with isolates from the USA, France, and Korea. Notably, koi carp injected with cultured KHV (ScKc-2105-K) showed 78.0% cumulative mortality within 14 days post-injection (dpi). Our findings support the importance of regular surveillance of viral diseases in cyprinids.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.343-348
• /
• 2008

To investigate the effects of incorporation of green manures (GM) into a sandy loam soil on growth, yield, and nutrient uptake of tomato (Lycoperiscon esculentum Mill.) and nutrient balances (input minus offtake of nutrients), five tomato production systems were compared under the condition of plastic film house: 1) a no input system (no additional amendment or inputs, 0-To-0-To); 2) a conventional system (application of N-P-K chemical fertilizers, Cf-To-Cf-To); 3) a leguminous GM-containing system (hairy vetch-tomato-soybean-tomato, Hv-To-Sb-To); 4) a graminaceous GM-containing system (rye-tomato-sudan grass-tomato, Ry-To-Sd-To); and 5) system mixed with leguminous and graminaceous GMs (rye-tomatosoybean- tomato, Ry-To-Sb-To). Here, hairy vetch and rye were cultivated as winter cover crops during late $Dec{\sim}late$ Feb and soybean and sudan grass were cultivated as summer cover crops during late $Jun{\sim}mid$ Aug. All of them cut before tomato planting and then incorporated into soil. Biomass of GMs was greater in summer season than that of winter season. Nitrogen amount fixed by a leguminous plants was about $126\;kg\;ha^{-1}$ per a cropping season, corresponding to 60% N level needed for tomato production, which was comparable to 50 and $96\;kg\;ha^{-1}$ fixed by rye and sudan grass. As a result, tomato yield of Hv-To-Sb-To system (legume GM treatment) was similar to Cf-To-Cf-To (conventional), but that in Ry-To-Sd-To system (graminaceous GM treatment) was not attained to a half level of conventional treatment. Nutrient budgets for N, P and K on the conventional farm were balanced or somewhat positive exception for minus-balanced K. Ry-To-Sd-To system showed a positive N, P and K budgets due to the depressed growth of tomato which is caused by high C/N ratio and low N-fixing capacity of the GMs. Inversely, those of Hv-To-Sb-To system were negative in all of N, P and K budgets because of increased growth and yield of tomato with high nitrogen-supplying capacity as well as low C/N ratio of leguminous GM. In conclusion, although conventional cultivation has an advantage in relation to N, P and K nutrient budgets rather than GM-incorporated systems, a leguminous GMs could be recommended as nitrogen reservoir and soil amendment because the yield of tomato between use of leguminous GM and conventional cultivation was not only significantly difference, but also GMs commonly reduce nutrient loss and improve microbial communities.

• Journal of Korean Foot and Ankle Society
• /
• v.1 no.1
• /
• pp.5-11
• /
• 1997

Multiple surgical procedures for the correction of hallux valgus have been described. The surgical algorithm is based on the degree of deformity, patient's age, and the presence or absence of arthritis. It is known that the role of an isolated distal soft-tissue procedure is limited and the procedure must be used in conjunction with the proximal metatarsal osteotomy to correct most hallux valgus. We reviewed retrospectively the clinical & radiological results of distal soft-tissue procedure with or without proximal metatarsal osteotomy, performed in 18 patients (29 cases ) who had mild to moderate degrees af hallux valgus deformity. The results were as follows : In 20 cases with isolated soft-tissue procedures, the preoperative hallux valgus angle (HV) averaged 30.6 degrees and the postoperative HV averaged 7.3 degrees. The preoperative intermetatarsal angle (IM) averaged 12.5 degrees and postoperative IM averaged 10.4 degrees. 2. In 9 cases with the proximal metatarsal osteotomy added, the preoperative HV averaged 32.5 degrees, and the postoperative HV averaged 8.0 degrees. The preoperative IM averaged 12.5 degrees, and postoperative IM averaged 10.1 degrees. 3. There was no significant difference of loss of correction, presence of complication, patients own satisfaction, between two groups. In conclusion, as for the patients with mild to moderate degrees of hallux valgus deformities, the clinical and radiological results following distal soft tissue procedure and proximal metatarsal osteotamy are not proved to be superior to those following isolated soft-tissue procedures.

• Journal of Welding and Joining
• /
• v.33 no.5
• /
• pp.53-60
• /
• 2015

Laser surface Melting Process is getting hardening layer that has enough depth of hardening layer as well as no defects by melting surface of substrate. This study used CW(Continuous Wave) Yb:YAG and STD11. Laser beam speed, power and beam interval are fixed at 70mm/sec, 2.8kW and 800um respectively. Hardness in the weld zone are equal to 400Hv regardless of melting zone, remelting zone overlapped by next beam and HAZ. Similarly, microstructures in all weld zone consist of dendrite structure that arm spacing is $3{\sim}4{\mu}m$, matrix is ${\gamma}$(Austenite) and dendrite boundary consists of ${\gamma}$ and $M_7C_3$ of eutectic phase. This microstructure crystallizes from liquid to ${\gamma}$ of primary crystal and residual liquid forms ${\gamma}$ and $M_7C_3$ of eutectic phase by eutectic reaction at $1266^{\circ}C$. After solidification is complete, primary crystal and eutectic phase remain at room temperature without phase transformation by quenching. On the other hand, microstructures of substrate consist of ferrite, fine $M_{23}C_6$ and coarse $M_7C_3$ that have 210Hv. Microstructures in the HAZ consist of fine $M_{23}C_6$ and coarse $M_7C_3$ like substrate. But, $M_{23}C_6$ increases and matrix was changed from ferrite to bainite that has hardness above 400Hv. Partial Melted Zone is formed between melting zone and HAZ. Partial Melted Zone near the melting zone consists of ${\gamma}$, $M_7C_3$ and martensite and Partial Melted Zone near the HAZ consists of eutectic phase around ${\gamma}$ and $M_7C_3$. Hardness is maximum 557Hv in the partial melted zone.