• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1441_1441
• /
• 2009

This paper describes performance of sealing integrity and bending strain of HV polymeric bushing with thermal mechanical test. Generally the properties of FRP tube can be influenced by the winding angle, wall thickness and winding tension. As a results, multi winding bushing shows that it has max deflection in the range of 16.5~16.9 mm.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.93-99
• /
• 2000

Using the EMTP(Electro Magnetic Transient Program) for the analysis of lightning direct voltage on the railway system, the shielding effects of overhead grounding wire on the railway were studied quantitatively. Installation of overhead ground wire and gap-type arrester such as s-horn Provides a 6.6㎸ HV distribution line with good protection effects. Even severe lightning induced voltage were create, 6.6㎸ HV lines can be withstand.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2004.04a
• /
• pp.110-111
• /
• 2004

• Journal of Microbiology and Biotechnology
• /
• v.3 no.2
• /
• pp.123-128
• /
• 1993

The polyesters (polyhydroxyalkanoates; PHAs) production capability in a two-step cultivation of Alcaligenes eutrophus H16(ATCC 17699) was investigated by using various organic carbon sources. The carbon sources used included linear $C_2~C_10$ monocarboxylic acids, $C_3~C_10$ dicarboxylic acids, crotonic acid, and several linear vicinal and $\omega$-diols. The polyesters synthesized were characterized by 500 MHz $^1 H-NMR$ spectroscopy, intrinsic viscosity$[\eta]$ measurement in chloroform and differential scanning calorimetry (DSC). The PHAs synthesis data showed that the use of C-odd ($C_3, C_5, and C_7$) monocarboxylic acids resulted in poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(P(3HB-co-3HV) (3HV content ranging 40 to 70 mol%) while the use of $C_9$ substrate gave the copolyester containing only 4 mol% of 3HV. All culture products obtained on $C_3$~C$_{10}$ dicarboxylic acids gave exclusively P(3HB). 500 MHz $^1 H-NMR$ analysis showed that all polyesters synthesized generally contained 1~2 mol% 3HV even for the unrelated substrates such as the carboxylic acids with even number of carbon. When $\alpha, \omega$-diols with even number of carbon were used as substrates, 4-hydroxybutyrate(4HB) was inserted into the polyester chain composed of P(3HB-co-4HB). Vicinal diols were generally not utilized by the bacterium for polyester production.n.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.2
• /
• pp.80-85
• /
• 2004

Chromium-carbon (Cr-C) and chromium-carbon-phosphorus (Cr-C-P) alloy deposits using trivalent chromium sulfate baths containing potassium formate were prepared to study their current efficiency, hardness change and phase transformations behavior with heat treatment, respectively. The current efficiencies of Cr-C and Cr-C-P alloy deposits increase with increasing current density in the range of 15-35 A/dm$^2$. Carbon content of Cr-C and phosphorous of Cr-C-P layers decreases with increasing current density, whereas, the carbon content of Cr-C-P layer is almost constant with the current density. Cr-C deposit shows crystallization at $400^{\circ}C$ and has (Cr+Cr$_{ 23}$$C_{6}$) phases at $800^{\circ}C$. Cr-C-P deposit shows crystallization at $600^{\circ}C$ and has (Cr+Cr$_{23}$ $C_{6}$$+Cr_3$P) phases at $800^{\circ}C$. The hardness of Cr-C and Cr-C-P deposits after heating treatment for one hour increase up to Hv 1640 and Hv 1540 and decrease about Hv 820 and Hv 1270 with increasing annealing temperature in the range of $400～^{\circ}C$, respectively. The hardness change with annealing is due to the order of occurring of chromium crystallization, precipitation hardening effect, softening and grain growth with temperature. Less decrease of hardness of Cr-C-P deposit after annealing above $700^{\circ}C$ is related to continuous precipitation of $Cr_{23}$ $C_{6}$ and $Cr_3$P phases which retard grain growth at the temperature.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.5
• /
• pp.282-289
• /
• 2009

The effects of the high temperature gas nitriding (HTGN), tempering and subzero treatment of STD11 steel have been investigated. HTGN treatment was carried out at $1050^{\circ}C$, $1100^{\circ}C$ and $1150^{\circ}C$ for 1 hr. in an atmosphere of $1\;kg/cm^2$ nitrogen gas. Tempering and double-tempering were performed at $550^{\circ}C$ for 1 hr. The surface layer of HTGN-treated steel appeared the precipitates of $M_2N$, $M_7C_3$ and $M_{23}C_6$ in the matrix of austenite. However, the interior region exhibited martensite with the precipitation of carbides. The nitrogen content of the surface layer appeared ~1.35 wt.%, ~0.83 wt.% and ~0.56 wt.% at the HTGN treatment temperature of $1050^{\circ}C$, $1100^{\circ}C$ and $1150^{\circ}C$, respectively. The surface hardness of double-tempered and subzero-treated steel measured the maximum value of 828 Hv, 960 Hv, 750 HV after HTGN treatment at the $1050^{\circ}C$, $1100^{\circ}C$ and $1150^{\circ}C$, respectively. These hardness value increased above 230~420 Hv compared with the HTGN-treated steel due to the decrease in retained austenite and existence of fine precipitates.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.4 s.48
• /
• pp.735-745
• /
• 1994

The incidence data (1991. 7. 1$\sim$1992. 6. 30) from the Implementation Study of Seoul Cancer Registry (ISSCR) were evaluated in terms of its completeness and validity. Two indicators for the completeness, Mortality/Incidence ratio (M/I ratio) and Age-specific Incidence Curve, showed fairy good registration throughout the age-sex specific strata, except the strata aged over 75 years old. The strata had very high M/I ratio (over 100%) and decreasing pattern of incidence, which suggested incomplete registration of cancer in this group. The active surveillance by a ISSCR staff improved the registration rate especially among elderlies. From the site specific M/I ratio, we found that liver cancer had oddly high M/I ratio. Since this high M/I ratio of liver cancer appears consistently in other reliable cancer registries, it is more like to be due to the high fatality of it rather than incomplete registration. The validity of the incidence data was assessed by three indicators; Histological Verification (HV%), Primary Site Unknown (PSU%), and Age Unknown (Age UNK%). The average HV% were 77% for men and 85% for women, which were slightly lower than those of other reliable cancer registries. This low HV% might be due to the considerable size of relative frequency of liver cancer in Korea, regarding the fact that the diagnosis of liver cancer is made mostly by non-biopsical radiologic methods (CT, Ultrasono, Angiography, MRI etc.). The level of PSU% and Age UNK% were in acceptable range, but not low enough, especially in terms of Age UNK%. Although ISSCR data had acceptable quality in general, it is needed to have more hospitals participate in the registry surveillance, to make registery data merged with death certificate data regulary, and educate the registration stans to be more competent and dedicated.

• Journal of Welding and Joining
• /
• v.34 no.1
• /
• pp.75-81
• /
• 2016

This study applied laser surface melting process using CW(Continuous wave) Yb:YAG laser and cold-work die steel SM45C and investigated microstructure and hardness. Laser beam speed, power and beam interval are fixed at 70 mm/sec, 2.8 kW and $800{\mu}m$ respectively. Depth of Hardening layer(Melting zone) was a minimum of 0.8 mm and a maximum of 1.0 mm that exceeds the limit of minimum depth 0.5 mm applying trimming die. In all weld zone, macrostructure was dendrite structure. At the dendrite boundary, Mn, Al, S and O was segregated and MnS and Al oxide existed. However, this inclusion didn't observe in the heat-affected zone (HAZ). As a result of interpreting phase transformation of binary diagram, MnS crystallizes from liquid. Also, it estimated that Al oxide forms by reacting with oxygen in the atmosphere. The hardness of the melting zone was from 650 Hv to 660 Hv regardless of the location that higher 60 Hv than the hardness of the HAZ that had maximum 600 Hv. In comparison with the size of microstructure using electron backscatter diffraction(EBSD), the size of microstructure in the melting zone was smaller than HAZ. Because it estimated that cooling rate of laser surface melting process is faster than water quenching.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.38.1-38.1
• /
• 2011

Yellow gold는 아름다운 광택과 손쉬운 가공성의 장점 때문에 장신구를 비롯한 다양한 분야에서 그 활용 가치가 매우 높다. 본 연구에서는 yellow gold의 hardness 강화 및 품질향상을 위하여 다양한 열처리 조건 별 기계적 특성 변화를 비교 관찰 하였다. 열처리 전 yellow gold alloy의 구성성분을 조사하기 위하여 EPMA와 ICP-MS를 사용하여 정성분석 및 정량분석 결과를 수치화 하였다. 총 44개의 14K yellow gold를 사용하여 $750^{\circ}C$, 30 min 의 조건에서 solid solution treatment 후 $200{\sim}350^{\circ}C$ 온도 범위에서 $50^{\circ}C$ 간격으로 age-hardening을 실시하였다. 또한 열처리 전과 후 grain 들의 배열 및 size 변화를 관찰하기 위해 식각을 실시하였다. 식각된 시료는 optical microscope (OM)을 통해 각 열처리 조건에 따라 전 후 변화를 관찰 하였다. 열처리 전 14K yellow gold의 hardness의 평균값은 120.6 Hv를 나타내었다. Solid solution treatment 후 hardness는 95.7 Hv로 평균값이 감소하였고, age-hardening 후에는 14K yellow gold는 $260^{\circ}C$에서 159.8 Hv, $270^{\circ}C$에서 170.2 Hv로 열처리 전에 비해 약 41% 증가된 결과를 나타내었다. 하지만 $270^{\circ}C$ 부터는 over-aging 현상을 나타내었다. OM 분석 결과 열처리 전 불균일했던 grain들의 배열이 solid solution treatment 및 quenching 후 다소 균일해 짐을 확인할 수 있었고, grain size 또한 열처리 전에 비해 증가함을 알 수 있었다. Solid solution treatment 후 모든 시료의 hardness 값이 전반적으로 감소하였다가 age-hardening을 통해 grain들의 배열이 점차 안정화 되면서 hardness가 증가 하였고, over-aging 구간에서는 급격히 감소하는 경향을 나타내었다. 이 결과로 우리는 14K yellow gold에 대한 age-hardening 최적조건을 도출 하였고, 각 열처리 조건 별 grain 배열 상태의 변화를 관찰 할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.678-685
• /
• 2010

GTAW was carried out to the austenitic 304(STS 304) and 22 APU stainless steels. In this case, difference of the corrosion characteristics of welded zone with STS 304 and 22APU mentioned above was investigated with electrochemical methods. Vickers hardness of weld metal in case of STS 304 (Hv-250) showed a relatively higher value than this of 22 APU(Hv-217). The corrosion current densities of weld metal of 22APU and heat affected zone of STS 304 were observed at the highest value compared to those of other welding zone respectively. This is probably because chromium depletion field due to chromium carbide formed to weld metal of 22APU and to heat affected zone of STS 304 can preferentially easily be corroded with more active anode than other fields. Consequently it is thought that application of the other welding methods like as laser welding or using of the optimum filler metals is necessary to improve the corrosion resistance of welding parts of these steels.