• Carbon letters
• /
• 제4권3호
• /
• pp.126-132
• /
• 2003

Granular Activated Carbon (GAC) has been proven to be an excellent material for many industrial applications. A systematic study has been carried out of the kinetics of physical as well as chemical activation of phenolic resin chars. Physical activation was carried out using $CO_2$ and chemical activation using KOH as activating agent. There are number of factors which influence the rate of activation. The activation temperature and residence time at HTT varied in the range $550{\sim}1000^{\circ}C$ and $\frac{1}{2}{\sim}8$ hrs respectively. Kinetic studies show that the rate of chemical activation is 10 times faster than physical activation even at much lower temperature. Above study show that the chemical activation process is suitable to prepare granular activated carbon with very high surface area i.e.$ 2895\;m^2/g$ in short duration of time i.e. 1 to 2 hrs at lower temperature i.e. $750^{\circ}C$ from phenolic resins.

• Carbon letters
• /
• 제1권2호
• /
• pp.64-68
• /
• 2000

This paper describes the mechanical properties and oxidation resistance of carbon fibers with and without additions of boron oxide additives, and describes the changes in the properties resulting from increased heat treatment temperature (HTT) of the fibers. Carbon fibers in this experiment were heat treated up to $2800^{\circ}C$ each with and without boron oxide treated on the surface of fibers. In the case of boron oxide added carbon fibers, they do not show the improvement of tensile strength and modulus compared to those of no treated carbon fibers below $2200^{\circ}C$ since they are doped substitutionally with boron above $2600^{\circ}C$, which accelerate the graphitization of carbon fibers. Boron oxide implanted carbon fibers showed high resistance to oxidation, however, when carbon fibers were heat treated below $2200^{\circ}C$, they showed almost the same trend of air oxidation.

• Korean Journal of Oriental Medicine
• /
• 제3권1호
• /
• pp.67-83
• /
• 1997

In order to search for anti-influenza virus type A agents from Korean medicinal herbs, we selected 100 medicinal herbs, based on a review of the Korean traditional medicine books. Four of 100 Korean medicinal herbs, MM-40, MM-55, MM-63, MM-110, exhibited very strong anti-influenza virus activity. The fractions of four medicinal herbs, which had very strong anti-influenza virus activity, were tested for antiviral activity by means of Haemagglutination inhibition test(HTT), 40% MeOH fraction of MM-40, $H_2O$ fraction of MM-55, 20% fraction of MM-63 3nd $H_2O$ fraction of MM-110 had strong anti-influenza virus activity at the range of $78{\mu}g/ml$ to $156{\mu}g/ml$, 1.56mg/ml to 100mg/ml, 6.25mg/ml to 50mg/ml and $48.7{\mu}g/ml$ to $780{\mu}g/ml$, respectively. These results of HIT indicated that fractions of Korean medicinal herbs might inhibit either attachment of virus to cell surface receptor or penetration of virus into cell during the initial stage of infection. In the cytotoxicity of fractions against red blood cells, 40% MeOH fraction of MM-40, 20% fraction of MM-63 and $H_2O$ fraction of MM-110 showed cytotoxicity at the range of $78{\mu}g/ml$ to 10mg/ml, 50mg/ml to 100mg/ml and $195{\mu}g/ml$ to 100mg/ml, respectively, whereas $H_2O$ fraction of MM-55 did not show cytotoxicity. In order to establish influenza virus adapted animal model, influenza virus type A were passaged 3 and 4 times successively in Balb/c mouse. As a result, we had 4 HA unit titers on the 5 days of 3rd passages and 7 days of 4th passages after infection, respectively.

• The Journal of Korean Obstetrics and Gynecology
• /
• 제29권1호
• /
• pp.1-13
• /
• 2016

Objectives The purpose of this study is to find out the effect of various concentrations of Hwangnyeonhaedok-tang (HTT) pharmacopuncture on ST25 (天樞) in rats with dextran sulfate sodium (DSS)-induced colitis.Methods Colitis was experimentally induced by feeding rats with water mixed with 5% (w/v) DSS for 20 days. The rats were divided into 5 groups: the normal group (Nor, n=5), the control group - colitis induced rats with no treatment (Con, n=5), the acupuncture group - colitis induced rats with acupuncture applied on ST25 (Acu, n=5), the pharmacopuncture group 1 - colitis induced rats with 0.729 mg/250 g/40 μl of pharmacopuncture applied on ST25 (PA-1, n=5), the pharmacopuncture group 2 - colitis induced rats with 3.645 mg/250 g/40 μl of pharmacopuncture applied on ST25 (PA-2, n=5). The changes in weight, excrement concentration and hemafecia were observed 5 times every 2 days. The colon lengths were measured from appendix to the end of colon after the experiment. Hematological and serological exams were conducted the day after the last treatment by cardiac puncturing anesthetized rats.Results ST25 is the abdominal front point (募穴) of large intestine meridian and is known to have effect in colitis. Various concentrations of HTT pharmacopuncture (HTTP) applied on ST25, in rats with DSS-induced colitis inhibited decrease in colon lengths and body weight in both PA-1 and PA-2 groups. Hematological and serological exam results also showed that HTTP has significant effect on colitis in both PA-1 and PA-2 groups.Conclusions Colon lengths were significantly increased in the acupuncture group, PA-1 group and PA-2 group, compared to the control group. The body weight was significantly increased (p<0.05) in PA-2 group after the first treatment, compared to the control group. TNF-α, IL-6, AST were significantly decreased in PA-1 and PA-2 groups, compared to the control group.

• Journal of Power System Engineering
• /
• 제21권5호
• /
• pp.13-19
• /
• 2017

The effect of heat treatment temperature (HTT) on the mechanical properties of polyacrylonitrile (PAN)-based carbon fiber had been investigated. The heat treatment on the carbon fiber was conducted under high vacuum atmosphere of $10^{-6}mmHg$, and the range of temperature of $1,000^{\circ}C$ to $2,000^{\circ}C$. As a results, The tensile strength of carbon fiber and carbon fiber composites showed increasing tendency with the rise of heat treatment temperature. And, the shape parameter of Weibull distribution for the strength of carbon single fiber showed an increasing trend until $1,800^{\circ}C$. But the shape parameter of Weibull distribution for the strength of carbon fiber composites showed no clear tendency with the rise of heat treatment temperature. The cause of reinforcement effect of the carbon fiber by the heat treatment was regarded as the carbonization of carbon single fiber.

• Journal of Advanced Navigation Technology
• /
• 제11권1호
• /
• pp.93-98
• /
• 2007

The importance of information security is increasing by the rapid development of the communication network. So, cryptosystems are used to solve these problems and securities of cryptosystems are dependent on keys. In this paper, we propose a key generation method which is based on cryptographically secure MD5 hash function. The basic structure of the MD5 hash function features is a repetitive structure which is processed in a block unit of 512 bits from inputs of limited length and generates a fixed output of 128 bits. The security of proposed method is based on the hash function and the proposed method can be also utilized for authentication algorithm or data encryption algorithm.

• Journal of the Korean Society of Safety
• /
• 제14권4호
• /
• pp.168-175
• /
• 1999

The objective of this research is to review the ergonomic keyboard developed to prevent musculo-skeletal disorders from being occurred during keyboard work. It was studied by comparing it with the traditional keyboard after analyzing and comparing the typing performance and work advantages both the two keyboards. Twelve male subjects with no history of musculo-skeletal disorders participated in the experiment. The quantitative data such as typing speed, accuracy, performance time, and the number of typing errors were obtained from the HTT software that was adjusted for this experiment. RULA worksheet and the degrees of extension and ulnar deviation on right and left wrist were used to analyze the upper body postures. The experiment results showed that the typing performance of the ergonomic keyboard decreased a little, but no significant difference statistically, compared with that of the traditional keyboard. On the work posture, the ulnar deviation during typing decreased in case of the ergonomic keyboard. But, the wrist extension was increased unexpectedly. Therefore, it can be regarded as these results occur due to the shape of wrist rest and the overall height of keyboard on a table. As a result, the reconsideration and redesign on the ergonomic keyboard are requested.

• Journal of KIISE:Information Networking
• /
• 제28권2호
• /
• pp.242-250
• /
• 2001

This paper deals with the TCP bandwidth guarantee problem in a differentiated serviccs(Diffserv) network. The Diffserv assured s<:rvice differentiates packet drop probabilities to guarantee the promised bandwidth even under network congestion. However a token buffer marker fails to show adequate performance because TCI' generates packets according to the unique Tel' congestion control mechanism. We propose a marker that uses a data buffer as well as a token buffer. The marker with a data buffer works well with the assured service mechanism because it smooths Tel' traffic. We showed that the marker with a data buffer achieves the target throughput better than a marker with a token buffer only. We also showed that the optimal buffer size is proportional to reserved throughput and HTT.

• Carbon letters
• /
• 제3권4호
• /
• pp.192-197
• /
• 2002

Microstructure plays an important role in controlling the fracture behaviour of carbon-carbon composites and hence their mechanical properties. In the present study effort was made to understand how the different interfaces (fiber/matrix interactions) influence the development of microstructure of the matrix as well as that of carbon fibers as the heat treatment temperature of the carbon-carbon composites is raised. Three different grades of PAN based carbon fibres were selected to offer different surface characteristics. It is observed that in case of high-strength carbon fiber based carbon-carbon composites, not only the matrix microstructure is different but the texture of carbon fiber changes from isotropic to anisotropic after HTT to $2600^{\circ}C$. However, in case of intermediate and high modulus carbon fiber based carbon-carbon composites, the carbon fiber texture remains nearly isotropic at $2600^{\circ}C$ because of relatively weak fiber-matrix interactions.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.449-465
• /
• 2017

The aim of the present work is to present a computational study of the non-linear aero-elastic behavior of a multi-layered Thermal Protection System (TPS). The severity of atmospheric re-entry conditions is due to the combination of high temperatures, high pressures and high velocities, and thus the aero-elastic behavior of flexible structures can be difficult to assess. In order to validate the specific computational model and the overall strategy for structural and aerodynamics analyses of flexible structures, the simplified TPS sample tested in the 8' High Temperature Tunnel (HTT) at NASA LaRC has been selected as a baseline for the validation of the present work. The von $K{\acute{a}}rm{\acute{a}}n^{\prime}s$ three dimensional large deflection theory for the structure and a hybrid Raleigh-Ritz-Galerkin approach, combined with the first order Piston Theory to describe the aerodynamic flow, have been used to derive the equations of motion. The paper shows that a good description of the physical behavior of the fabric is possible with the proposed approach. The model is further applied to investigate structural and aero-elastic influence of the number of the layers and the stitching pattern.