• Korean Journal of Food Science and Technology
• /
• v.33 no.3
• /
• pp.282-287
• /
• 2001

This study was carried out to investigate the difference of ginsenoside compositions in crude ginseng saponins prepared by five different methods including three new methods. Two known methods are hot methanol(MeOH) extraction/n-butanol(n-BuOH) fractionation and hot MeOH extraction/Diaion HP-20 adsorption/MeOH elution. Three new methods are hot MeOH extraction/cation AG 50W $absorption/H_2O$ elution/n-BuOH extraction, cool MeOH extraction/Diaion HP-20 adsorption/MeOH elution and direct extraction with ethyl acetate(EtOAc)/n-BuOH. Analysis of ginsenoside composition in the crude saponins by conventional HPLC/RI(Refractive Index) did not show great difference between methods except EtOAc/n-BuOH method. However, HPLC/ELSD (evaporative light scattering detector) employing gradient mobile phase afforded fine resolution of ginsenoside Rf, $Rg_1$ and $Rh_1$, and great difference of ginsenoside compositions between methods. LC/MS revealed that large amount of prosapogenins were produced during the pass through the cation exchange (AG 50W) column being strongly acidic. Six major ginsenosides such as $Rb_1,w;Rb_2,$ Rc, Rd, Re and $Rg_1$, 5 prosapogenins and one chikusetsusaponin were identified by LC/MS. A newly established HPLC method employing ODS column and gradient mobile phase of $KH_2PO_4/CH_3CN$ revealed that malonyl ginsenosides were detected only in the crude saponin obtained from cool MeOH extraction.

• Applied Biological Chemistry
• /
• v.46 no.2
• /
• pp.130-133
• /
• 2003

A method for separating heme-iron from hemoglobin (Hgb) hydrolysate by dialysis was developed. Recovery of heme-iron increased with increasing Hgb concentration, whereas rejection of peptide and separation effciency expressed by HP ratio (heme-iron/peptide) did not show significant differences. HP ratio increased with increases in the degree of hydrolysis of Hgb and $KH_2PO_4$ concentrations of dialysis solution. Recovery of heme-iron decreased with increase in the pH of dialysis solution due to wash-out of heme-iron across the dialysis membrane caused by increase in solubility of heme-iron. Rejections of peptide were 74.5 and 87.5% (2 and 5 kDa of cut off size, respectively), whereas recovery of heme-iron decreased from 86.5 (2 kDa) to 63.1% (25 kDa). Amounts of heme-iron and peptide of dried heme-iron product were 21.7 and 77.0%, and HP ratio and production yield were 28.2 and 6.5%, respectively.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.135-141
• /
• 1997

The early studies demonstrated that the relative amount of FSH was important for stimulating normal ovarian activity and demonstrated the existence of a threshold level for FSH, above which follicular growth was activated. It was found that only a modest increase in circulating FSH level above the threshold (between 10 and 30%) was required to stimulate folliculogenesis. In addition, FSH is primary responsible for initiating estradiol production through the activation of the aromatase enzyme system in granulosa cells, follicular secretion and growth. LH on the other hand, plays a supportive role in ovarian steroidogenesis, stimulating the ovarian thecal cells to produce androgen, the precursor for estradiol synthesis. But there is now an increasing number of reports in the literature demonstrating an adverse effect of LH on fertility and miscarriage in infertile and fertile women. So HP-FSH is the drug of a highly purified FSH preparation which has a higher specific activity and far fewer impurities than FSH. This study was performed to evaluate the efficacy and safety of HP-FSH administered (SC; subcutaneous) versus FSH(IM; intramuscular) for ovulation induction. 20 candidates patients for ovulation induction were participated. All patients underwent pituitary desensitizing with a long gonadotropin-releasing hormone (GnRH) agonist protocol and ovulation induction was started with HP-FSH SC (10 patients; group I) or FSH IM (10 patients; group II). After ovulation, outcome of ovulation induction and local reaction of injection site were compared. There were no difference of outcome of ovulation in two groups except pregnancy rate/embryo transfer. Group I had a higher pregnancy rate/ embryo transfer than Group II (44.4% Vs 28.6%). Pain, redness, tenderness, bruising and itching when the injection received on the first 5 days of treated (50 SC and 50 IM injections) were assessed. There were no significant difference (P>0.05) in the incidence of tenderness, bruising and itching between the IM and SC injection. But IM injection (FSH) had a tendency of higher above incidence. The number of reports of pain, redness were significantly increased in IM injection group (P<0.05). These results indicate that SC administration of HP-FSH has been shown to be as effect for superovulation as traditional gonadotropins, with an improved safety profile due to the removal of extaneous proteins.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.558-563
• /
• 2013

The present study was conducted to estimate energy requirements for maintenance in laying hens by using indirect calorimetry and energy balance. A total of 576 28-wk-old Nongda-3 laying hens with dwarf gene were randomly allocated into four ME intake levels (86.57, 124.45, 166.63 and 197.20 kcal/kg body weight $(BW)^{0.75}$ per d) with four replicates each. After a 4 d adaptation period, 36 hens from one replicate were maintained in one of the two respiration chambers to measure the heat production (HP) for 3 d during the feeding period and subsequent 3 d fast. Metabolizable energy (ME) intake was partitioned between heat increment (HI), HP associated with activity, fasting HP (FHP) and retained energy (RE). The equilibrium FHP may provide an estimate of NE requirements for maintenance (NEm). Results showed that HP, HI and RE in the fed state increased with ME intake level (p<0.05). Based on the regression of HP on ME intake, the estimated ME requirements for maintenance (MEm) was 113.09 kcal/kg $BW^{0.75}$ per d when ME intake equals HP. The FHP was decreased day by day with the lowest value on the third day of starvation. Except for lowest ME intake level, the FHP increased with ME intake level on the first day of starvation (p<0.05). The FHP at the two higher ME intake levels were greater than that at the two lower ME intake levels (p<0.05) but no difference was found between the two lower ME intake levels. Linear regression of HP from the fed state to zero ME intake yielded a value of 71.02 kcal/kg $BW^{0.75}$ per d, which is higher than the extrapolated FHP at zero ME intake (60.78, 65.23 and 62.14 kcal/kg $BW^{0.75}$ per d for the first, second and third day of fasting, respectively). Fasting time, lighting schedules, calculation methods and duration of adaptation of hens to changes in ME intake level should be properly established when using indirect calorimetry technique to estimate dietary NE content, MEm and NEm for laying hens.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.110-117
• /
• 2005

In this work, solid-state inclusion complex powders of itraconazole and $2-hydroxypropyl-{\beta}-cyclodextrin(HP-{\beta}-CD)$ were produced by a supercritical anti-solvent (SAS) process. In order to evaluate the degree of complexation, the thermal behavior of the microparticulate complexes was investigated using differential scanning calorimetry. The experimental results obtained for the solubility and dissolution rate of the microparticulate inclusion complexes in a buffer solution of pH 1.2 showed that the complexation of itraconazole with $HP-{\beta}-CD$ results in a significant increase in the solubility and dissolution rate of itraconazole. The particle size of the SAS-produced inclusion complexes was dramatically reduced ($<0.1-0.5{\mu}m$) compared with untreated itraconazole ($30-50{\mu}m$) and $HP-{\beta}-CD$ ($50-100{\mu}m$). The solubility of itraconazole was increased with the increase of pressure at a constant temperature to ca. $758.6{\mu}g/mL$ in an aqueous medium of pH 1.2. The dissolution rate of itraconazole was observed to be significantly improved and about 90% of itraconazole was found to be dissolved within 5-10 min.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.157-163
• /
• 2006

A supercritical fluid process, called aerosol solvent extraction system(ASES), is especially suitable to the pharmaceutical, cosmetic and food industries due to its environmentally-friendly, non-toxic and residual solvent-free properties. In particular, the application of the ASES process to the processing of thermo-labile bioactive compounds has received attention of many scientists and engineers because of its low-temperature operating conditions. Unstable substances such as Vitamin-C and Vitamin-A can be effectively protected from degradation during the preparation process, because the ASES process is free from oxygen and moisture. In this study, Vitamin-C was formulated with 2-hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta$-CD) for enhancement of Vitamin-C stability and bioavailability using the ASES process. To investigate the influence of the preparation process on the stability of Vitamin-C, Vitamin-C/HP-${\beta}$-CD inclusion complexes were prepared using both conventional solvent evaporation method and ASES process, and stored in a 50 mM phosphate buffer solution of pH 7.0 at $25^{\circ}C$ for 24 hours. From the experimental results, the stability of the Vitamin-C/HP-${\beta}$-CD inclusion complex prepared from the ASES process was found to be much higher than that of pure Vitamin-C and the Vitamin-C/HP-${\beta}$-CD inclusion complex prepared by the solvent evaporation method. The stability of Vitamin-C was observed to increase with the decrease of temperature at a constant pressure or with the increase of pressure at a constant temperature.

• Journal of Environmental Health Sciences
• /
• v.31 no.3
• /
• pp.221-226
• /
• 2005

Isoflavone was extracted with various concentration of aqueous methanol using whole hypocotyls as the starting material. Whole hypocotyls were preferred as the raw material because the residue could be easily removed from the solvent after the extraction process. Extraction yield was almost constant at the methanol concentration of $20-80\%$. Most of the isoflavone was extracted within 1 hr, and the extraction yield remained almost constant thereafter. When the concentration of methanol was $80\%$, the content of total solid was reduced due to the reduced extraction of contaminating protein as the result of protein insolubilization. Among resins tested, Diaion HP-20, Amberlite XAD-16, and Amberlite IRC-50 showed the highest capacity to absorb the compound. Open column chromatography with Diaion HP-20 showed that $80\%$ aqueous ethanol was most efficient as the eluting solvent with final recovery of the phytochemical being more than $95\%$. Maximum adsorption of the phytochemical occurred at the acidic pH 2-4. When the spatial velocity was increased to 15 and more, the degree of adsorption was decreased, whereas below spatial velocity of 15, the adsorption capacity of isoflavone to the resin was almost constant. The purity of the isoflavone purified by column chromatography was $78\%$.

• Korean Journal of Poultry Science
• /
• v.14 no.2
• /
• pp.97-102
• /
• 1987

The respiratory experiment was made on laying hen fed acclimented to three temperatures of 10, 20, and 30$^{\circ}C$. 1. The FHP of laying hen decreased with increasing room temperature. 2. The feed intake and heat production(HP) all decreased with increasing temperature. However, the highest energy retention was found with optimum temperature (20$^{\circ}C$). 3, The MEm's were 128,110, and 110kcalkg 0.75 for the 10, 20, and 30$^{\circ}C$ of room temperature. The NAME's were 64,78, and 69 percent for the respective room temperature. The results indicated that the highest NAME was obtained with optimum temperature(20$^{\circ}C$). 4. Although there was no significant difference in the nitrogen retention(NR) at different temperatures, the NR was maximum at the optimum temperature(20$^{\circ}C$). 5. The experimental results suggest that in the Bone of thermal neutrality under cooler and hotter conditions heat loss is more dependent on the environmental temperature.

• Journal of Life Science
• /
• v.20 no.10
• /
• pp.1433-1442
• /
• 2010

Parameters related to dissolved oxygen for the production of pullulan by Aureobasidium pullulans HP-2001 were optimized in 7 l and 100 l bioreactors. The optimal concentrations of glucose and yeast extract for the production of pullulan were 50.0 and 2.5 g/l, respectively, and its conversion rate from glucose was 37% at a flask scale. The optimal initial pH of the medium and temperature for cell growth were 7.5 and $30^{\circ}C$, whereas those for the production of pullulan were 6.0 and $25^{\circ}C$. The optimal agitation speed and aeration rate for cell growth were 600 rpm and 2.0 vvm in a 7 l bioreactor, whereas those for the production of pullulan were 500 rpm and 1.0 vvm. The production of pullulan with an optimized agitation speed of 500 rpm and aeration rate of 1.0 vvm was 18.13 g/l in a 7 l bioreactor. Maximal cell growth occurred without inner pressure, whereas the optimal inner pressure for the production of pullulan was 0.4 kgf/$cm^2$ in a 100 l bioreactor. The production of pullulan under optimized conditions in this study was 22.89 g/l in a 100 l bioreactor, which was 1.38 times higher than that without inner pressure.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.05a
• /
• pp.198-201
• /
• 2004

To investigate hydrostatic pressure (HP) effect on myofibrillar protein (Mf) extracted from bovine Semitendinosus muscle, Ca- and Mg-ATPase activities to evaluate denaturation of myosin and actin, and soluble protein contents were observed. In Mf treated with 100 MPa for 5 min was not observed denaturation of myosin and actin. In Mf treated with 200 MPa for 5 min, denaturation of myosin and actin were observed but inactivation rate was low (0.0136 $min^{-1}$). Inactivation rate of myosin and actin was dramatically increased above 300 MPa treatment. However denaturation of myosin and actin was not that critical with duration time. By increasing pressure size, the amount of myosin and actin in soluble protein eluted in 20 mM potassium phosphate buffer (pH 7.0) containing 0.6 M NaCl were decreased. SDS-PAGE of soluble protein released from Mf suspension in 0.1 M NaCl buffer (pH 7.0) showed that low molecular weight proteins (15${\sim}$36 KDa) were released by HP treatment above 200 MPa. From the results, denaturation of myosin and actin, and release of light molecule proteins of Mf were observed by HP treatment over 200 MPa.