• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.373-381
• /
• 2017

The main objective of this study was to increase the germination percentage of kenaf seeds with less number of times under non-saline and saline conditions. Therefore, the first goal was to assess the response of kenaf seeds to NaCl. The second goal was to evaluate the effects of $KNO_3$ on kenaf seed germination. The germination percentage exhibited a decreasing tendency in germination rate. Plant dry weight was approximately 0.2 g in all treatments at 5 days after germination. As time passed, the electrical conductivity (EC) value of hydro-priming (HP) consistently increased by 8.7 mS/cm at 24 hours of immersion. However, seeds primed with $KNO_3$ showed no difference in EC values even as times passed. Regarding the priming effect, priming in 100 mM $KNO_3$ concentration for 12 hours increased germination up to 85% in $H_20$ solution and in 0 mM $KNO_3$ concentration upto 73.8% under 0.3% NaCl solution, compared to that of Control. Germination synchronization, shoot length, and leaf unfolding of primed seeds were greater than those of the Control. In addition, main root and hair roots appeared more rapidly in the treated seeds and were more abundant compared to that of the Control. The T50 (times to reach 50% of the final germination percentage) of the Control in both $H_20$ and 0.3% NaCl solutions was 18 and 22 hours, respectively. However, when treated $KNO_3$ priming (0 to 100 mM) in $H_20$ and 0.3% NaCl solution, 9 hours was sufficient to reach T50. Primed (hydro-priming and $KNO_3$) seeds had a lower MDG (mean days untill germination; 0.6-0.62) compared to that of the Control (1.13-1.31) in $H_20$ and 0.3% NaCl solutions. Regarding dry weight of plants after priming, an increasing tendency after the priming treatment in the H20 solution was observed. Furthermore, no significant difference in plant dry weight under 0.3% NaCl stress was observed between the Control and primed seeds. Taken together, the results suggest that 50-100 mM $KNO_3$ priming for 24 hours optimize seed germination rate in less number of times of exposure with great vigor. Therefore, it is recommended for kenaf seed invigoration before planting.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.162-167
• /
• 2004

In this study, untreated (UT), water soaking (WT), and sanitizing solutions [chlorine at 100 ppm (CL): ethanol at 10% (ET); hydrogen peroxide at 1% (HP); chlorine at 100 ppm + ethanol at 10%(CE); chlorine at 100 ppm + hydrogen peroxide at 1% (CH); ethanol at 10% + hydrogen peroxide at 1% (EH); chlorine at 100 ppm + ethanol at 10% + hydrogen peroxide at 1% (CEH)] were compared in terms of their antimicrobial effectiveness against natural microflora of wild cabbage (Brassica oleracea var. capitata). All samples were kept in sanitizing solutions for 2 min, and effectiveness of sanitizing agents was evaluated based on number of decimal reduction of total aerobic mesophilic, total coliforms, E. coli, lactic acid bacteria, and yeast and mold counts. Average initial levels of these organisms in samples were $9.21{\pm}0.15,\;6.60{\pm}0.06,\;6.08{\pm}0.03,\;and\;3.66{\pm}0.08\;log_{10}\;CFU/g$ for total aerobic mesophilic bacteria, total coliforms, lactic acid bacteria, and yeasts and molds, respectively, Escherichia coli was not detected in any tested samples. Decimal reduction of populations of total aerobic mesophilic, total coliforms, E. coli, lactic acid bacteria, and yeasts and molds were: in $WT\;8.09,\;5.36,\;5.82,\;and\;3.57 log_{10}\;CFU/g;\;in \;CL\;7.39,\;4.10\;5.24,\;2.45\;log_{10}\;CFU/g;\;in\;ET\;6.78,\;4.23,\;5.20,\;2.50\;log_{10}\;CFU/g;\;in\;HP\;6.11,\;4.27,\;5.28,\;2.46\;log_{10}\;CFU/g;\;in\;CE\;6.18,\;4.26,\;5.31,\;2.49\;log_{10}\;CFU/g;\;in\;CH\;6.10,\;3.77,\;5.33,\;2.46\;log_{10}\;CFU/g;\;in\;EH\;6.07\;3.82,\;4.76,\;2.41\;log_{10}\;CFU/g;\;and\;in\;CEH\;5.27,\;3.45,\;4.45,\;2.15\;log_{10}\;CFU/g,$ respectively. Statistical analysis of the results showed effectiveness of CEH sanitizing solution for elimination of microbial contamination was the highest among all sanitizer treatments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.4
• /
• pp.347-360
• /
• 2020

In this study, the Bayesian state-space model was used for the stock assessment of the Blackfin flounder. In addition, effective measures for the resource management were presentedwith the analysis on the effectiveness of fisheries management plans. According to the result of the analysis using the Bayesian state-space model, the main biometric value of Blackfin flounder was analyzed as 1,985 tons for maximum sustainable yield (MSY), 23,930 tons for carrying capacity (K), 0.000007765 for catchability coefficient (q) and 0.31 for intrinsic growth (r). Also the evaluation on the biological effect of TAC was done. The result showed that the Blackfin flounder biomass will be kept at 14,637 tons 20 years later given the present TAC volume of 1,761 tons. If the Blackfin flounder TAC volume is set to 1,600 tons, the amount of biomass will increase to 16,252 tons in the future. Lastly, the biological effectiveness of the policy to reduce fishing effort was assessed. The result showed that the Blackfin flounder biomass will be maintained at 13,776 tons if the current fishing efforts (currently hp) level is set and maintained. If the fishing effort is reduced by 20%, it will increase to 17,091 tons in the future. The analysis on the economic effect of TAC showed that NPV will be the lowest at 1,486,410 won in 2038, 20 years after the establishment of 2,500 tons of TAC volume. If the TAC volume is set at 2,000 tons, NPV was estimated to be the highest at 2,206,522,000 won. In addition, the analysis on the economic effect of the policy to reduce the amount of fishing effort found that NPV will be 2,235,592,000 won in 2038, 20 years after maintaining the current level of fishing effort. If the fishing effort is increased by 10%, NPV will be the highest at 2,257,575 won even thoughthe amount of biomass will be reduced.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.367-375
• /
• 2003

The aim of this study was to investigate the soil physical properties and the traction characteristics of paddy field before tillage by a computer simulation. Soil physical properties, such as soil moisture content, bulk density, soil hardness, and soil texture were measured in the twelve rice production area. Mathematical model based on dimensional analysis which include soil physical properties and vehicle factors was used for the computer simulation. Most of the soil texture of the investigated area was silty loam, loam and silty clay loam. Soil moisture content ranged between 20 and 40% mostly. Soil bulk density was in the range of 1,500 to $1,700kg\;m^{-3}$. Soil hardness ranged between 2 to $12kg\;cm^{-2}$ mostly. Soil hardness incorporates the effects of many soil physical properties such as moisture content, texture and bulk density, and so the range of soil hardness was greater than that of any other physical properties. The predicted net traction was in the range of 70 to 1,500 kgf depending on the area, but it was above 1,000 kgf for most of the investigated area. Thus it was concluded that 50 HP tractor can pull the four row moldboard plow considering the conventional tillage depth and width. But for the soft soil area such as Andong and Namyang, tractor itself may have mobility problem and show high slip during plowing operation.

• Preventive Nutrition and Food Science
• /
• v.8 no.4
• /
• pp.356-364
• /
• 2003

A methanol extract from seeds of Paeonia lactiflora (Paeoniaceae, peony) was found to possess different antiproliferative activities against four different human cancer cell lines: Hela, MCF-7, HepG2 and HT-29. Furthermore, five different methanol (20, 40, 60, 80 and 100 % MeOH) fractions obtained by fractionation of the methanol extract of the seeds on a Diaion HP-20 column exhibited differential antiproliferative effects against the above four cancer cell lines. Among five fractions, the 60 % MeOH fraction showed relatively lower antiproliferative activity on MCF-7 estrogen-sensitive breast cancer cell than the other cancer cell lines. Systematic separation of 60% the MeOH fraction by silica gel and Sephadex LH-20 columns led to the isolation of four known stilbenes, trans-resveratrol (1), trans-(+)- $\varepsilon$ -viniferin (2), gnetin H (3) and suffruticosol B (4). The four stilbenes (1∼4) exerted differential biphasic effects on cell proliferation of MCF-7 cells in a similar manner as genistein, a soybean isoflavone used as a positive reference, in the concentration range from 1.0 to 200 $\mu$M. Three stilbenes (1 ∼ 3) weakly stimulated the proliferation of MCF -7 cells at doses below 10 JIM. However, strong antiproliferative effects on MCF-7 cell were exerted by extract 1 at a dose of 200 JIM, and by 2 and 3 at doses above 25 $\mu$M. In contrast, 4 inhibited the proliferation of MCF-7 cell at a dose below 25 $\mu$M, but stimulated cell proliferation at concentrations of 50 and 100 $\mu$M. All four stilbenes (1∼4) stimulated the proliferation of ROS 17/2.8 osteoblast-like cells in the range of 10$^{-10}$ ∼10$^{-1}$ $\mu$M. Compound 1 exhibited especially potent proliferative activity, although its activity was weaker than that of genistein. Additionally, three resveratrol oligomers (2∼4) also exhibited concentration-dependently moderate proliferative activity, but less than that of 1. These results suggest that resveratrol, and its dimer and trimers from the seeds of Paeonia lactiflora may act as a phytoestrogen, but in a somewhat different manner from that of genistein.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.12
• /
• pp.1970-1975
• /
• 2007

Squalene synthase plays an important role in the cholesterol biosynthetic pathway. Inhibiting this enzyme in hypercholesterolemia can lower not only plasma cholesterol but also plasma triglyceride levels. A squalene synthase inhibitor was screened from Prunus mume fruit, and then purified via sequential processes of ethanol extraction, HP-20 column chromatography, ethyl acetate extraction, silica gel column chromatography, and crystallization. The squalene synthase inhibitor was identified as chlorogenic acid with a molecular mass of 354 Da and a molecular formula of $C_{16}H_{18}O_9$ based on UV spectrophotometry, $^1H$ and $^{13}C$ NMRs, and mass spectrometry. Chlorogenic acid inhibited the squalene synthase of pig liver with an $IC_{50}$ level of 100 nM. Since chlorogenic acid was an effective inhibitor against the squalene synthase of an animal source, it may be a potential therapeutic agent for hypercholesterolemia.

• Journal of Microbiology
• /
• v.41 no.3
• /
• pp.196-201
• /
• 2003

The object of this study was to characterize Bacillus strains GB-017 and GB-0356, which produce antifungal substances, especially for plant pathogens. In addition, this study was undertaken to characterize the culture conditions required for the production of antifungal substances and to document some of the properties of the antifungal substance produced by these soil-isolated strains. Strains GB-0365 and GB-017 were found to be bacillus-shaped, gram-positive and motile, and to inhibit Botrytis cineria, Fusarium sp., Pythium sp., and Rhizoctonia solani. Antagonistic activity was maintained up to pH 9.0, and the antifungal activity was stable to heat at 80$^{\circ}C$ for 1 h. Antifungal substances were separated and purified using ion exchange and adsorption columns including WK-I0(H$\^$＋) (pH 7.0), HP20 column (pH 3.0) and IPA (pH 3.0). and IPA. Its UV absorption spectrum showed major peaks at 231 and 259 nm, corresponding to polyene and lactone. A fast atom bombardment mass spectrum (FAB MS) showed a highest peak at 441 m/z and major peaks at 192, 205, and 370 m/z.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.4
• /
• pp.241-247
• /
• 2008

Paclitaxel is a taxane diterpene amide, which was first extracted from the stem bark of the western yew, Taxus brevifolia. This natural product has proven to be useful in the treatment of a variety of human neoplastic disorders, including ovarian cancer, breast and lung cancer. Paclitaxel is a highly hydrophobic drug that is poorly soluble in water. It is mainly given by intravenous administration. Therefore, The pharmaceutical formulation of paclitaxel ($Taxol^{(R)}$; Bristol-Myers Squibb) contains 50% $Cremophor^{(R)}$ EL and 50% dehydrated ethanol. However the ethanol/Cremophor EL vehicle required to solubilize paclitaxel in $Taxol^{(R)}$ has a pharmacological and pharmaceutical problems. To overcome these problems, new formulations for paclitaxel that do not require solubilization by $Cremophor^{(R)}$ EL are currently being developed. Therefore this study utilized a supercritical fluid antisolvent (SAS) process for cremophor-free formulation. To select hydrophilic polymers that require solubilization for paclitaxel, we evaluated polymers and the ratio of paclitaxel/polymers. HP-${\beta}$-CD was used as a hydrophilic polymer in the preparation of the paclitaxel solid dispersion. Although solubility of paclitaxel by polymers was increased, physical stability of solution after paclitaxel/polymer powder soluble in saline was unstable. To overcome this problem, we investigated the use of surfactants. At 1/20/40 of paclitaxel/hydrophilic polymer/ surfactant weight ratio, about 10 mg/mL of paclitaxel can be solubilized in this system. Compared with the solubility of paclitaxel in water ($1\;{\mu}g/mL$), the paclitaxel solid dispersion prepared by SAS process increased the solubility of paclitaxel by near 10,000 folds. The physicochemical properties was also evaluated. The particle size distribution, melting point and amophorization and shape of the powder particles were fully characterized by particle size distribution analyzer, DSC, SEM and XRD. In summary, through the SAS process, uniform nano-scale paclitaxel solid dispersion powders were obtained with excellent results compared with $Taxol^{(R)}$ for the physicochemical properties, solubility and pharmacokinetic behavior.

• Mycobiology
• /
• v.45 no.1
• /
• pp.44-47
• /
• 2017

Ginseng damping-off, caused by the fungal pathogens Rhizoctonia solani and Pythium sp., is a critical disease in ginseng seedling. In a continuing effort to find microorganisms with the potential of acting as a biocontrol agent against Rhizoctonia damping-off, we found that a Streptomyces sp. A501 showed significant antifungal activity against Rhizoctonia solani. In field experiment to test the efficacy of Streptomyces sp. A501 in controlling ginseng damping-off, the incidence of damping-off disease was meaningfully reduced when ginseng seeds were soaked in the culture broth of Streptomyces sp. A501 before sowing. To perform characterization of the antifungal compound, we isolated it from the culture broth of strain A501 through Diaion HP-20 and silica gel column chromatographies and preparative high-performance liquid chromatography. The structure of the antifungal compound was assigned as fungichromin by spectroscopic methods, mainly nuclear magnetic resonance and electrospray ionization-mass analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.197.2-197.2
• /
• 2015

Low-cost, high efficiency solar cells are tremendous interests for the realization of a renewable and clean energy source. ZnTe based solar cells have a possibility of high efficiency with formation of an intermediated energy band structure by impurity doping. In this work, the ZnTe:O/CdS/ZnO structure was fabricated by pulsed laser deposition (PLD) technique. A pulsed (10 Hz) Nd:YAG laser operating at a wavelength of 266 nm was used to produce a plasma plume from an ablated a ZnTe target, whose density of laser energy was 4.5 J/cm2. The base pressure of the chamber was kept at a pressure of approximately $4{\times}10-7Torr$. ZnO thin film with thickness of 100 nm was grown on to ITO/glass, and then CdS and ZnTe:O thin film were grown on ZnO thin film. Thickness of CdS and ZnTe:O were 50 nm and 500 nm, respectively. During deposition of ZnTe:O films, O2 gas was introduced from 1 to 20 mTorr. For fabricating ZnTe:O/CdS/ZnO solar cells, Au metal was deposited on the ITO film and ZnTe:O by thermal evaporation method. From the fabricated ZnTe:O/CdS/ZnO solar cell, current-voltage characteristics was measured by using HP 4156-a semiconductor parameter analyzer. Finally, solar cell performance was measured using an Air Mass 1.5 Global (AM 1.5 G) solar simulator with an irradiation intensity of 100 mW cm-2.