• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.47-52
• /
• 1999

In recent years, the micro-tribological behavior of silicon has been the topic of much interest. peformance of thin film under light load is important for potential applications in MEMS. In this work under light load and various humidity, the tribological behavior of undulated surface with various width and shape was Investigated. The results show that undulated surface of linear type had good tribological properties abrasive wear occur depending on the sliding condition. Also the effect of humidity on friction and wear was not important if exist undulation. Finally, undulations on HDD were found to be effective in trapping wear particles.

• Broadcasting and Media Magazine
• /
• v.14 no.3
• /
• pp.36-46
• /
• 2009

비디오 서버는 대량의 영상과 음성 데이터를 보호화해서 디지털 포맷으로 저장하고 원하는 즉시 비디오 데이터를 재생 및 전송할 수 있는 컴퓨터 기반 장비를 말한다. 기존 저장 매체인 VTR(Video Tape Recorder) 테이프(Tape)에 녹화되던 영상은 비디오 서버의 HDD(Hard Disk Drive)에 파일로 저장되고 있다. 이러한 형태로 기존 VTR 이 수행하던 녹화, 편집, 송출 등의 역할을 비디오 서버가 파일 기반 제작 시스템으로 대체하고 있다. 즉 테이프리스(Tapeless) 제작환경의 촬영 단계인 녹화부터 송출 단계의 마지막 재생까지 사용되는 장비가 HD 비디오 서버이다. 파일 기반의 IT(Information technology) 제작환경은 제작 프로세스를 효율화하여 생산성을 향상시키고 비용을 절감하며 콘텐츠 재사용을 통한 미디어가치를 높인다. 이러한 장점들 때문에 비디오 서버 사용은 날로 증가되고 있다. 이에 본 논문에서는 비디오 서버 관련 기술에 대해 알아보고 자체 개발한 경험을 바탕으로 HD 비디오 서버 구현 기술을 소개하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.160-166
• /
• 1997

The spindle motor in a computer hard disk drive can be modeled as a rotor-bearing system supported by the base plate. Ball bearing is the crucial element to determine the stiffness of the spindle motor, and its design parameters and operating conditions determine the dynamic characteristics of the spindle motor. In the analysis of a rotor-bearing system with a short shaft like a spindle motor, the stiffness of the base plate as well as ball bearings must be considered accurately to analyze the dynamic charateristics of a spindle motor. In this paper, the lateral and the axial vibration of the spindle motor were analyzed by the transfer matrix method for the dual-shaft rotor-bearing model and by d.o.f lumped parameter model, respectively. The simulation results had good agreements with the experimental modal testing. The dynamic characteristics were fully investigated for the change of the major design parameters of the spindle motor, i.e. the preload of ball bearings and the rotational speed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.29-35
• /
• 1997

This research presented a frequency analysis method to analyze NRRO in a computer hard disk drive. RRO was proved to be the harmonics of rotational frequency. The frequency components of NRRO is the subtraction of the harmonics from TIR in frequency domain, so that NRRO in time domain can be obtained by Fourier inverse transformation of NRRO in frequency domain. This method can make the experiments simple without the index signal indispensable to time domain analysis. This research also shows that NRRO is caused by the defect frequencies of ball bearing. Even though the excitation force of ball bearing is independent of the rotational speed, the amplitude of NRRO is magnified near the resonance frequencies of the spindle motor. NRRO in axial direction is almost twice bigger than that in radial direction, because the spindle motor has smaller stiffness in axial direction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.11-15
• /
• 2015

SSD(Solide State Disk) Memory is gradually replacing HDD(Hard Disk Drive) for high speed data input and output processing on Internet server system. In this paper, we proposed efficient data distribution storage algorithm in DRAM based SSD. And we did performance test for proposed algorithm and existing algorithm in the same server environment condition. The result of comparison of performance test is as fellows. Data backup processing time of proposed algorithm was reduced by half than that of existing algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.85-91
• /
• 2019

In this paper, we propose a new logging and recovery scheme that is suited for the high-performance transaction processing system base on flash memory storage. The proposed scheme is designed by considering flash's I/O characteristic of asymmetric costs between page update/read operations. That is, we substitute the costly update operation with writing and real-time usage of snapshot log, which is for the page-level physical redo. From this, we can avoid costly rewriting of a dirty page when it is evicted form a buffering pool. while supporting efficient revery procedure. The proposed scheme would be not lucrative in the case of HDD-based system. However, the proposed scheme offers the performance advance sush as a reduced number of updates and the fast system recovery time, in the case of flash storage such as SSD (solid state drive). Because the proposed scheme can easily be applied to existing systems by saving our snapshot records and ordinary log records together, our scheme can be used for improving the performance of upcoming SSD-based database systems through a tiny modification to existing REDO algorithms.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.2
• /
• pp.153-160
• /
• 1999

Dual-stage servo system for super-high density HDD has the chances of being composed of the coarse actuator(VCM) for track-seeking control and the fine actuator(microactuator) for-following control in near future. This paper presents the concept design of dual-stage servo system and the track-following control using an electrostatic microactuator for super-high density HDD. The electrostatic microactuator is designed and fabricated by MEMS(micro-electro-mechanical system) process. Both the nonlinear plant(voltage/displacement-to-electrostatic force) and the linear plant(electrostatic force-to-displacement) of the microactuator are established. Inverse function of the nonlinear plant is employed for a feedforward nonlinear compensator design. And feedforward control effect of this compensator is shown by time-domain experiments. A track-following feedback controller is designed using the feedback nonlinear compensator which is derived from the feedforward nonlinear compensator. The track-following control experiment is done to show the control efficiency of the proposed control system. And, excellent track-following control performance(2.21kHz servo-bandwidth, 7.51dB gain margin, $50.98^{\circ}$phase margin) is achieved by the proposed control system.

• Journal of KIISE
• /
• v.42 no.6
• /
• pp.691-698
• /
• 2015

Application launch time is an important performance metric to user experience in desktop and laptop environment, which mostly depends on the performance of secondary storage. Application launch times can be reduced by utilizing solid-state drive (SSD) instead of hard disk drive (HDD). However, considering a cost-performance trade-off, utilizing SSDs as caches for slow HDDs is a practicable alternative in reducing the application launch times. We propose a new SSD caching scheme which migrates data blocks from HDDs to SSDs. Our scheme operates entirely in the file system level and does not require an extra layer for mapping SSD-cached data that is essential in most other schemes. In particular, our scheme does not incur mapping overheads that cause significant burdens on the main memory, CPU, and SSD space for mapping table. Experimental results conducted with 8 popular applications demonstrate our scheme yields 56% of performance gain in application launch, when data blocks along with metadata are migrated.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.99-104
• /
• 2019

In a gas system fire extinguishing system, extinguishing agents are usually stored with approximately 280 bar at $21^{\circ}C$ and are released at approximately 8 MPa through the decompression valve and orifice to quickly suppress the fire. When extinguishing agents are discharged, they cause a loud noise (approximately 140 dB), which can damage electronics, such as hard disk drives (HDDs). Therefore, the noise is becoming a serious issue in the gas extinguishing system. The method of the noise reduction by adding an absorbent is most general and in this study, the thickness of the absorbent was as a selected design variable. The noise level at the observation point and the flow characteristics inside the nozzle were numerically calculated and analyzed using the commercial code ANSYS CFX ver. 18.1.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.2
• /
• pp.1-7
• /
• 2017

Recently, NAND flash memory, which is used as a storage medium, is replacing HDD (Hard Disk Drive) at a high speed due to various advantages such as fast access speed, low power, and easy portability. In order to apply NAND flash memory to a computer system, a Flash Translation Layer (FTL) is indispensably required. FTL provides a number of features such as address mapping, garbage collection, wear leveling, and hot data identification. In particular, hot data identification is an algorithm that identifies specific pages where data updates frequently occur. Hot data identification helps to improve overall performance by identifying and managing hot data separately. MHF (Multi hash framework) technique, known as hot data identification technique, records the number of write operations in memory. The recorded value is evaluated and judged as hot data. However, the method of counting the number of times in a write request is not enough to judge a page as a hot data page. In this paper, we propose hot data identification which considers not only the number of write requests but also the persistence of write requests.