• Journal of the Korean Professional Engineers Association
• /
• v.27 no.3
• /
• pp.121-131
• /
• 1994

It is very difficult to partially describe the hull shape made up of 3-dimensional free form surface. With computerizing skill in ship design, the geometric modeling technique has been developed. In hull shape modeling, the blending technique has not yet been adapted to the hull shape surface has a variable curvature. By adapting the blend surface, small surface on drawing plane is to be softly blended with given hull surface and a projecting part. This study has adapted to the ship design one of the blending methods by which offsets data of the blend surface can be obtained by the input of blend radius on two base surfaces.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.978-983
• /
• 2014

The polymer nano composite possess good priority recently for engineering applications. Especially the electrical insulating materials attract the high performance of nano composites. In this work the ballmill synthesiation process of nano sized Alumina ($Al_2O_3$), the preparation of new nano composite material with an content of enamel and synthesized Alumina as 1wt%, 3wt% and 5wt%. Experimental investigation has been carried out for the prepared nano composites materials with respect to dielectric parameter measurements such as dielectric loss (tan ${\delta}$), dielectric constant (${\varepsilon}$), dielectric strength under various temperature. The partial discharge level also measured for all the samples and the PD inception voltage is also observed and compared. Weight loss of the material has been analyzed through TGA. It has been experimentally proved that 3wt% of Alumina nano filler added enamel has significant improvement in the dielectric and thermal properties.

• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1014-1019
• /
• 2001

The diamond thin film was deposited on Si(100) substrate from$CH_3OH/H_2O$mixtured gas using a hot filament chemical vapor deposition(HFCVD) method. The deposition condition for samples has been varried with the$CH_3OH/H_2O$composition. Scanning electron microscopy(SEM) and Raman spectroscopy has been employed for the sample analysis. The diamond sample has been obtained below 20Pa with$CH_3OH/H_2O$mixtured gas. The crystallinity of diamond film improved as the composition $CH_3OH$decreases from 60Vol% to 52Vol%, and the sample structure changed from the cauliflower to the diamond structure. But the sample structure was becomes cauliflower at 50Vol% of in$CH_3OH$ in the $CH_3OH/H_2O$. It was shown that the$CH_3OH$ has threshold composition.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.1013-1017
• /
• 2008

Syndecan-3 is a cell-surface heparan sulfate proteoglycan, which performs a variety of functions during cell adhension process. It is also a coreceptor for growth factor, mediating cell-cell and cell-matrix interaction. Syndecan-3 contains a cytoplasmic domain potentially associated with the cytoskeleton. Syndecan-3 is specifically expressed in neuron cell and has related to neuron cell differentiation and development of actin filament in cell migration. Syndecans each have a unique, central, and variable (V) region in their cytoplasmic domains. And that region of syndecan-3 may modulate the interactions of the conserved C1 regions of the cytoplasmic domains by tyrosine phosphorylation. Cytoplasmic domain of syndecan-3 has been synthesized for NMR structural studies. The solution structure of syndecan-3 cytoplasmic domain has been determined by two-dimensional NMR spectroscopy and simulated-annealing calculation. The cytoplasmic domain of the syndecan proteins has a tendency to form a dimmer conformation with a central cavity, however, that of syndecan-3 demonstrated a monomer conformation with a flexible region near C-terminus. The structural information might add knowledge about the structure-function relationships among syndecan proteins.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.2
• /
• pp.153-162
• /
• 2016

In this study, we investigated the moisturizing effects of collagen extract from jellyfish. The mositurizing effects were measured by the caspase 14 expression, filaggrin, hyaluronan synthase-3 (HAS-3), aquaporin-3 (AQP-3) and desmocollin (DSC). As a results, effect of caspase 14 mRNA expression of collagen extract are similar to that of retinoic acid (RA) which is a reference control. And the collagen extract showed inhibitory of filaggrin, HAS-3, AQP-3 and DSC mRNA expression of 211.7%, 139.9%, 212.5% and 116.8% respectively, at the concentration of 2%. Therefore, our study suggested that jellyfish collagen extract has considerable potential as a cosmetics ingredient with moisturizing effect.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.539-546
• /
• 2007

In this paper, a 3-D EM simulation methodology for on-chip spiral inductor analysis has provided and it is shown that the methodology can be adapted to the highly predictable design for CMOS VCO. LC-resonator type VCO have fabricated by using standard 0.25 um CMOS process. And the LC VCO layout case which has pattern ground shielded inductors and the other layout case which has no pattern grounded inductors were fabricated for the verification of their effects on the VCO's phase noise by reducing the Q-factor of inductors. Fabricated VCO has 3.094 GHz, -12.15 dBm output at the tuning voltage of 2.5 V, and from the simulation, Q-factor of the pattern grounded inductor has increased 8% at 3 GHz, and from the measurement results, the phase noise has reduced by 9 dB at the 3 MHz off-set frequency for the pattern grounded inductor layout case.

• Electronics and Telecommunications Trends
• /
• v.37 no.3
• /
• pp.64-73
• /
• 2022

As the COVID-19 pandemic has decreased face-to-face communication in everyday life, our interest in cultural communication via virtual world has grown significantly. In particular, the demand for applications that use three-dimensional (3D) data generation technology such as virtual reality, augmented reality, virtual performances, and realistic content is rapidly increasing in the entertainment and gaming industries. Additionally, improved computing capacity has increased the demand for high-resolution data. This study investigates the trends in 3D scanning and photogrammetry technologies that can support high-quality 3D data generation and introduces the high-resolution 3D data generation technology developed and reported in ETRI.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.3
• /
• pp.63-70
• /
• 2005

As the landfill ban of food waste has enforced since 2005, the composition of municipal solid waste(MSW) has changed dramatically. In this 2 year study, MSW in a small city has collected 3 times at 10 different generating points, and physico-chemical analysis has done. From the result, the effect of landfill ban of food waste on the physico-chemical properties of MSW was described. Landfill ban of food waste has reduced by 12 weight % in the composition of food waste in MSW, and has reduced by 25 % of bulk density. After landfill ban of food waste, water content of MSW has reduced to 32.3%, which is reduced by 14.1 % of water content of year 2004 data. Low heating value of MSW after landfill ban was 2991.4kcal/kg, which has increased 32% than that of year 2004 data. From landfill gas generation modeling, it is estimated that the yearly generation rate of landfill gas will be reduced by 5% than in case of accepting food waste into the landfill.

• Korean Journal of Acupuncture
• /
• v.21 no.1
• /
• pp.79-93
• /
• 2004

Objectives and methods : To study on the anti-cancer, anti-metastasis and immune response improvement effects of Herbal-acupuncture with Sinomenii acuti Lignum infusion solution(SAL-HAS), we injected Sinomenii acuti Lignum infusion solution into Joksamni$(ST_{36})$ of C57BL/6 mouse which is corresponding to human Joksamni(ST36). We observed its effect on the number of $CD25^+/CD4^+,\;CD8^+/CD3e^+,\;CD69^+/B220^+,\;NK1.1^+/CD3e^+$ cells in mouse PBMCs(peripheral blood mononuclear cells), the number of the pulmonary colony, and the effect on MST(mean survival time) and ILS(increase in MST over control) of C57BL/6 mice implanted intravenously with B16-F10 melanoma. Results and Conclusions : 1. The spleen cells proliferation of the sample groups treated with SAL-HAS extract has increased significantly compared with that of the control group. 2. The percentage of the $CD25^+/CD4^+,\;CD8^+/CD3e^+,\;CD69^+/B220^+,\;NK1.1^+/CD3e^+$ cells in C57BL/6 mouse PBMCs of the sample groups treated with SAL-HAS has increased compared with that of the control group. 3. The pulmonary colony number of the sample groups SAL-HAS has decreased significantly compared with that of the control group. 4. MST and ILS of the sample groups SAL-HAS have increased significantly compared with those of the control group.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4571-4584
• /
• 2022

The analysis of rapid flow transients in Reactor Coolant Pumps (RCP) is essential for a reactor safety study. An accurate and precise analysis of the RCP coastdown is necessary for the reactor design. The coastdown of RCP affects the coolant temperature and the colloidal crud in the primary coolant. A realistic and kinetic model has been used to investigate the behavior of activated colloidal crud in the primary coolant and steam generator that solves the pump speed analytically. The analytic solution of the non-dimensional flow rate has been determined by the energy ratio β. The kinetic energy of the coolant fluid and the kinetic energy stored in the rotating parts of a pump are two essential parameters in the form of β. Under normal operation, the pump's speed and moment of inertia are constant. However, in a coastdown situation, kinetic damping in the interval has been implemented. A dynamic model ACCP-SMART has been developed for System Integrated Modular and Advanced Reactor (SMART) to investigate the corrosion due to activated colloidal crud. The Fickian diffusion model has been implemented as the reference corrosion model for the constituent component of the primary loop of the SMART reactor. The activated colloidal crud activity in the primary coolant and steam generator of the SMART reactor has been studied for different equilibrium corrosion rates, linear increase in corrosion rate, and dynamic RCP coastdown situation energy ratio b. The coolant specific activity of SMART reactor equilibrium corrosion (4.0 mg s^-1) has been found 9.63×10^-3 µCi cm^-3, 3.53×10^-3 µC cm^-3, 2.39×10^-2 µC cm^-3, 8.10×10^-3 µC cm^-3, 6.77× 10^-3 µC cm^-3, 4.95×10^-4 µC cm^-3, 1.19×10^-3 µC cm^-3, and 7.87×10^-4 µC cm^-3 for ²⁴Na, ⁵⁴Mn, ⁵⁶Mn, ⁵⁹Fe, ⁵⁸Co, ⁶⁰Co, ⁹⁹Mo, and ⁵¹Cr which are 14.95%, 5.48%, 37.08%, 12.57%, 10.51%, 0.77%, 18.50%, and 0.12% respectively. For linear and exponential coastdown with a constant corrosion rate, the total coolant and steam generator activity approaches a higher saturation value than the normal values. The coolant and steam generator activity changes considerably with kinetic corrosion rate, equilibrium corrosion, growth of corrosion rate (ΔC/Δt), and RCP coastdown situations. The effect of the RCP coastdown on the specific activity of the steam generators is smeared by linearly rising corrosion rates, equilibrium corrosion, and rapid coasting down of the RCP. However, the time taken to reach the saturation activity is also influenced by the slope of corrosion rate, coastdown situation, equilibrium corrosion rate, and energy ratio β.