• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.412-415
• /
• 2010

첨단 주택에서 가전기기의 에너지 소모량을 모니터링하기 위하여 센서 네트워크를 이용한 스마트 플러그를 제안한다. 제안한 시스템은 전기 콘센트 형태로, 매 초마다 홀센서를 지나가는 전류량을 측정하여 센서 네트워크를 통해 홈 게이트웨이에 전송한다. 홈 게이트웨이는 전송된 데이터를 전력량으로 변환하여 저장하고, 모니터링 프로그램을 통해 전력량을 표시한다. 실험 결과 제안한 시스템은 에너지 소모와 사용을 관리함에 있어서 우수한 성능을 확인하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.6-6
• /
• 2004

마이크로 / 나노 바이오 기술은 생명공학 및 의약기술의 발전을 가능하게 하고 생체시스템 관련 연구를 위한 마이크로 및 나노 기기를 제작할 수 있게 함으로써 새로운 기술적 영역으로 부각되고 있다. 이러한 기술은 1990년대 초에 랩온어칩(Lab-on-a-chip)의 개발을 가능하게 하였다. 랩온어칩은 실험실(Lab)을 하나의 소자(Chip)에 올려놓는다(On)는 말로 쉽게 설명된다. 즉, 생물학이나 생화학 실험실에서 주로 연구되는 단백질, 세포 등 인체에 영향을 주는 다양한 물질들이 체내외에서 나타내는 반응을 쉽게 검출, 분석하는 일련의 과정들을 빠르고 정확하게 수행할 수 있도록 도와주는 도구인셈이다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.272-272
• /
• 2004

홈 네트워크(home network)란 집안과 밖에서 언제든지 편리하고 안전하며 경제적인 생활서비스를 즐길 수 있도록 다양한 디지털 가전 기기들이 서로 연결된 네트워크를 의미한다. 디지털 신호 처리 기술의 발전으로 인하여 백색 가전으로 불리우던 냉장고나 세탁기 등이 점차 디지털화되고, 가전용 운영 체제 기술과 고속 멀티미디어 통신 기술 등이 디지털 가전에 응용되고 있다. 이로 인하여, 새로운 형태의 정보 가전이 등장하고, 홈 네트워크 분야의 _관심도가 높아지고 있다.(중략)

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.133-140
• /
• 2010

본 논문에서는 전기기구 접속부에서 발생되는 화재위험성을 분석하고자 일반적으로 전기기기에 사용되는 KIV($1.25\;mm^2$, 50가닥)전선을 사용하여, 인위적인 손상을 주어 길이 5 mm, 9 mm, 15 mm에 각각 소선수(50, 32, 16, 8, 4, 2, 1가닥)를 가진 반단선 시료를 제작하고, 제작된 시료에 차단기나 퓨즈 등 전기적인 안전장치가 동작하지 않는 정상전류(4 A, 8 A, 12 A, 16 A)를 300초간 인가한 후, 열화상카메라를 이용하여 반단선의 온도특성 및 발화가능성을 확인하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.3
• /
• pp.115-121
• /
• 2001

This paper deals with the electrical insulation design of a gas insulated power transformer based on extra turns method satisfying the impulse test performed in the worst condition. The calculation of electrical strength in insulation structure was done by 2D finite element method. The gas insulated power transformer was manufactured by selecting the optimum arrangement among design results. the validity of the design result is verified by the impulse test of manufactured machine.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.1
• /
• pp.23-29
• /
• 2001

A BLDC motor has a serious drawback that torque pulsation is generated in every commutation period though it has many advatages compared to the conventional DC Motor. In this paper, the influence of commutation time on torque pulsation is studied. Generally in calculating the torque of BLDC motor, it is assumed that the decaying phase back EMF is constant, but the torque model considering decaying phase back EMF is introduced here. Through it, the torque in commutation period has torque pulsation component caused by commutation itself and it cannot be removed perfectly even if there is no current pulsation. To reduce the torque pulsation, a new method is proposed, which controls a point of commutation and the optimal point of commutation is found. Simulation shows that proposed method reduces the torque pulsation considerately.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.83-87
• /
• 2002

In order to improve the capability of magnetic circuit, magnetic materials are used for all kinds of electromagnetic energy-conversion devices. This paper presents the analysis method considering magnetic properties of the magnetic material and analyzes that the effects of magnetic materials. In addition, it is described that the requirements of magnetic materials for the improvement of electric machines. Several application examples using a metal powder in electromagnetic energy conversion devices is introduced.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.11
• /
• pp.617-624
• /
• 1999

The spiral type thin-film inductor performed in high frequency at 2-5[MHz] range is analyzed by 2-dimensional Finite Element Method(2D FEM). The features of micro thin-film inductor have complicated electromagnetic phenomenon such as skin effect, proximity effect and magnetic saturation. To develope miniatured magnetic device considering these features, it is important to predict the property of the thin film inductor according to design parameter. In this paper, we present the 2D FEM analysis for the spiral type thin film inductor. The characteristics of inductor from point of view of inductance, resistance and quality factor are studied according to design parameter and various pattern construction.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.449-451
• /
• 2003

This paper examines the insulation coordination scheme of line and equipment in distribution system when the direct lightning surge strikes. The BIL that is applied in distribution system is not properly considered the performance and operation of arresters. Because of that, the high BIL is being used at partial system. This paper variously analyse the lightning overvoltage of line and equipment with earth of overhead grounding wire and installation types of arrester. Form these result, authors examine the rationality of BIL.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.366-368
• /
• 2003

In this paper, a parametric evaluation method of protection ability is proposed. The adequacy of every parameter is evaluated for the setting rules. Then the results are combined to give protection level of a whole protective system. The setting rules are categorized into three groups for hierarchical calculation. The proposed scheme is applied to a location problem of a new protective device to show its effectiveness.