• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.89-90
• /
• 2007

This paper presents the mechanical properties of 3C-SiC thin film according to 0, 7, and 10% carrier gas $(H_2)$ concentrations using Nano Indentation. When carrier gas $(H_2)$ concentration was 10%, it has been proved that the mechanical properties, elastic modulus and hardness, of 3C-SiC are the best of them. In the case of 10% carrier gas concentration, Young's modulus and Hardness were obtained as 367 GPa and 36 GPa, respectively. When the surface roughness according to $H_2$ concentrations was investigated by AFM (atomic force microscope), when $H_2$ concentration was 10%, the roughness of 3C-SiC thin was 9.92 nm, which is also the best of them. Therefore, in order to apply poly 3C-SiC thin film to MEMS applications, $H_2$ concentration's rate should increase to obtain better mechanical properties and surface roughness.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3290-3294
• /
• 2011

The properties of monomeric and dimeric salen-aluminum complexes, [salen(3,5-$^tBu)_2$Al(OR)], R = $OC_6H_4-p-C_6H_6$ (H1) and R = [salen(3,5-$^tBu$)AlOPh]C$(CH_3)_2$ (H2) (salen = N,N'-bis-(salicylidene)-ethylenediamine) as host layer materials in red phosphorescent organic light-emitting diodes (PhOLEDs) were investigated. H1 and H2 exhibit high thermal stability with decomposition temperature of 330 and $370^{\circ}C$. DSC analyses showed that the complexes form amorphous glasses upon cooling of melt samples with glass transition temperatures of 112 and $172^{\circ}C$. The HOMO (ca. -5.2~-5.3 eV) and LUMO (ca. -2.3~-2.4 eV) levels with a triplet energy of ca. 1.92 eV suggest that H1 and H2 are suitable for a host material for red emitters. The PhOLED devices based on H1 and H2 doped with a red emitter, $Ir(btp)_2$(acac) (btp = bis(2-(2'-benzothienyl)-pyridinato-N,$C^3$; acac = acetylacetonate) were fabricated by vacuum-deposition and solution process, respectively. The device based on vacuum-deposited H1 host displays high device performances in terms of brightness, luminous and quantum efficiencies comparable to those of the device based on a CBP (4,4'-bis(Ncarbazolyl) biphenyl) host while the solution-processed device with H2 host shows poor performance.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.180-184
• /
• 2018

Gallium oxide ($Ga_2O_3$) and silicon carbide (SiC) are the material with the wide band gap ($Ga_2O_3-4.8{\sim}4.9eV$, SiC-3.3 eV). These electronic properties allow high blocking voltage. In this work, we investigated the characteristic of $Ga_2O_3$ and 4H-SiC vertical depletion-mode metal-oxide-semiconductor field-effect transistors. We demonstrated that the blocking voltage and on-resistance of vertical DMOSFET is dependent with structure. The structure of $Ga_2O_3$ and 4H-SiC vertical DMOSFET was designed by using a 2-dimensional device simulation (ATLAS, Silvaco Inc.). As a result, 4H-SiC and $Ga_2O_3$ vertical DMOSFET have similar blocking voltage ($Ga_2O_3-1380V$, SiC-1420 V) and then when gate voltage is low, $Ga_2O_3-DMOSFET$ has lower on-resistance than 4H-SiC-DMOSFET, however, when gate voltage is high, 4H-SiC-DMOSFET has lower on-resistance than $Ga_2O_3-DMOSFET$. Therefore, we concluded that the material of power device should be considered by the gate voltage.

• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.143-149
• /
• 2014

The designed dye material, namely 2-(4-(9H-carbazol-9-yl)benzylidene) compound, was synthesized. After the reaction, the solid was filtered and purified by recrystalization with acetone/water. To confirm and analyze its synthesis and structural formation, the single crystal was prepared and its measurement was carried out. A yellow needle crystal of $C_{22}H_{13}N_3$ were made on a Rigaku R-AXIS RAPID diffractometer using graphite monochromated CuK${\alpha}$ radiation. All details were suggested and introduced to support and communicate this study.

• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.625-630
• /
• 1990

Cordierite powders were prepared from Si(OC2H5)4, Al(OC3H7i)3 and Mg(OC2H5)2 by the sol-gel method. Two different methods were applied for producing fine and homogeneous powders. One is that Si(OC2H5)4 with a lowr rate of hydrolysis was partially hydrolyzed and then Al(OC3H7i)3 and Mg(OC2H5)2 were mixed and reacted. The other is based on the simultaneous hydrolysis of these metal alkoxides using i-C4H9OH which retards the rate of hydrolysis of Al(OC3H7i)3 and Mg(OC2H5)2. It was confirmed that ifne and homogeneous powders were obtained from both methods. Also these powders were calcined at four different temperatures during two hours. X-ray diffraction patterns show only ${\mu}$-cordierite phase at 1000$^{\circ}C$, ${\mu}$-cordierite and ${\alpha}$-cordierite phases at 1100-1200$^{\circ}C$ and ${\alpha}$-cordierite phase at 1300$^{\circ}C$ respectively.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.98-102
• /
• 1995

The crystal structure of -Ethyl-1,4-dihydro-7-methyl-1,8-naphthyridin-4-one-3-carboxylic acid [Nalicixic Acid] has been determined from single crystal X-ray diffraction study; C12H12N2O3, monoclinic, P21/c, a=8.910(2)Å, b=13.145(3)Å, c=9.370(3)Å, β =100.06(2)°, V=1080.6Å, T=293K, Z=4, CuKα(λ=1.5418Å). The molecular structure was solved by direct method and refined by full-matrix least squares to a final R=0.055 for 1555 unique observed [F0>4σ(F0)] reflections and 166 parameters. The conformation of the molecule is stabilized by an intramolecular O(17)-H(17)…O(14) hydrogen bond [2.525(2)Å, 144.3(10)°].

• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.97-109
• /
• 2004

The synthesis and crystal structure of amorphous calcium carbonate obtained from gas-liquid reaction of CaO-$C_2 H_5 OH$-$CO_2$ system according to change of added amount of calcium oxide by blowing $CO_2$ gas and reaction time using ethanol and ethylene glycol were investigated by electric conductivity, X-ray diffraction, and scanning electron microscope. The powdery or gelatinous phases were prepared by passing $CO_2$ gas at a flow rate of 1$\ell$/min into the suspensions containing 10~40g of CaO in mixing solutions 900ml of $C_2 H_5 OH$- and 100ml of ethylene glycol. By rapid filtration and drying the both phases at $60^{\circ}C$ under reduced pressure, the phases converted to the spherical vaterite and amorphous phase. The stable phase of amorphous calcium carbonate(ACC) was formed in the region pH 7-9 but the formation regions of amorphous phase were remarkably affected by pH in the mother liquor. It seems that a part of ACC changed into chain calcite as an intermediate products. The initial reactants prior to the formation of precipitated calcium carbonate is ACC. And ACC is unstable in the aqueous solution and crystallizes finally to calcite by the through-solution reaction. Especially ACC was produced or gelatinous phase which precipitated from the reaction of CaO-$C_2 H_5 OH$-$CO_2$ system.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.73-79
• /
• 1985

The crystal and molecular structure of acetone 4-benzylthiosemicarbazone, $C_{11}H_{15}N_3S$, has been determined by the single crystal X-ray diffraction methods. The crystals are monoclinic, space group $P2_1/c$ with unit cell dimensions, a = 10.249(7), b = 11.403(9), c = 10.149(7)TEX>${\AA}$, ${\beta}$ = 90.9$(1)^0$ and z = 4. The intensities were collected on an automatic four-circle diffractometer with graphite-monochromated Mo-$K_{\alpha}$ radiation. The structure was solved by direct methods and refined by full matrix least-squares methods. The final R was 0.045 for 1554 observed reflections. S-C(8)-N(2)-N(3)-C(9)-C(10) atoms make a zigzag planar chain. There are no unusual bond lengths and angles. There are two independent hydrogen bonds in the crystal structure. One is N-H${\cdots}$S intermolecular hydrogen bond with the length of 3.555${\AA}$ and makes dimer-like units. The other is N-H${\cdots}$N intramolecular hydrogen bond with the length of 2.568${\AA}$. The structure was compared with those of other thiosemicarbazone derivatives.

• Fisheries and Aquatic Sciences
• /
• v.6 no.2
• /
• pp.59-65
• /
• 2003

The critical thermal maximum (CTM) of black rockfish, Sebastes schlegeli, was evaluated. Black rockfish were acclimated at $24^{\circ}C$, and then exposed to temperatures from 24 to $33^{\circ}C$. Black rockfish were kept in constant darkness and subjected to a gradual temperature increase $(1 ^{\circ}C\;12^{-1})$. The oxygen consumption rate (OCR) was measured using an automatic intermittent­flow-respirometer (AIFR) during the exposure period (from 119.3 to 143.5 h). The OCR increased from 94.5 to 214.2mL $O_2 kg^{-1}\;ww\;h^{-1}$ as the temperature rose from 24 to $29.4-30.9^{\circ}C$. Subsequently, the OCR increased abruptly, reaching 245.8-412.7mL $O_2 kg^{-1}\;ww\;h^{-1}$ at $32^{\circ}C$. This study suggests that the CTM for black rockfish is $29.4-30.9^{\circ}C$ when temperature is increased at $1^{\circ}C\;12h^{-1}$ following acclimation at $24^{\circ}C$.

• Korean Journal of Animal Reproduction
• /
• v.27 no.3
• /
• pp.215-223
• /
• 2003

This study was to investigate the effects of fertilization time and culture medium of pig oocytes matured in-vitro by liquid boar sperm. The sperm rich fraction (30∼60 ml) was slowly cooled to room temperature (20∼23$^{\circ}C$) by 2 h after collection. Semen was transferred into 15 ml tubes, centrifuged at room temperature for 10 min 800 ${\times}$ g, and the supernatant solution was poured off. The concentrated sperm was resuspended with 5 ml of the LEN diluent to provide 1.0${\times}$10$^{9}$ sperm/ml at room temperature. The resuspended semen was cooled in a refrigerator to 4$^{\circ}C$. The medium used for oocyte maturation was TCM-199 supplemented with 26.19 mM sodium bicarbonate, 0.9 mM sodium pyruvate, 10 $\mu\textrm{g}$/ml insulin, 2 $\mu\textrm{g}$/ml vitamin B$_{12}$ , 25 mM HEPES, 10 $\mu\textrm{g}$/ml bovine apotransferrin, 150 $\mu$M cysteamine, 10 IU/ml PMSG, 10 IU/ml hCG, 10 ng/ml EGF, 0.4% BSA, 75 $\mu\textrm{g}$/ml sodium penicillin G, 50 $\mu\textrm{g}$/ml streptomycin sulfate and 10% pFF. After about 22 h of culture, oocytes were cultured without cysteamine and hormones for 22 h at 38.5$^{\circ}C$, 5% $CO_2$ in air. Oocytes were inseminated with liquid boar sperm stored at 4$^{\circ}C$ for 2 days after collection. Oocytes were coincubated for 1, 3, 6 and 9 h in 500 ${mu}ell$ mTBM fertilization media with 1.0${\times}$10$^{6}$ sperm/ml concentration, respectively. Thereafter, oocytes were transferred into 500 ${mu}ell$ NCSU-23, HEPES buffered NCSU-23, PZM-3 and PZM-4 culture media, respectively, for further culture of 6, 48 and 144 h. The rates of sperm penetration and male pronuclear formation were higher in the fertilization times for 6 and 9 h than in those for 1 and 3 h. The rates of cleaved oocytes were higher in the fertilization times for 6 and 9 h (85.0 and 84.6%) than in those for 1 and 3 h (61.1 and 76.8%). The percentage of blastocyst formation from the cleaved oocytes was highest in the fertilization time for 6 h (33.6%) than in that for 1, 3 and 9 h (11.4, 23.0 and 29.6%). Mean cell numbers per blastocyst were 32.9, 27.6, 26.3 and 24.4 in the fertilization times for 6, 9, 3 and 1 h, respectively. The rate of blastocyst from the cleaved oocytes and the number of cells per blastocyst were higher in HEPES buffered NCSU-23 culture medium than in NCSU-23, PZM-3 and PZM-4 culture media. In conclusion, we found out that liquid boar sperm stored at 4$^{\circ}C$ could be used for in-vitro fertilization of pig oocytes matured in-vitro. Also, we recommend the coincubation time of 6 h in 500 ${mu}ell$ TBM fertilization medium with 1${\times}$10$^{6}$ sperm/ml concentration and the HEPES buffered NCSU-23 culture medium for in-vitro fertilization of pig oocytes matured in-vitro.