• The Journal of Natural Sciences
• /
• v.5 no.1
• /
• pp.67-75
• /
• 1992

In the our country, especially in Yeongil and Wolsung area, abundant authigenic zeolites are found from the tuffaceous sediments and volcanic rocks of Miocene age showing wide variation in their mineralogy and abundance from horizon to horizon. The principal zeolite species identified are clinopti-lolite. mordenite. heulandite. ferrierite, and erionite. etc. Zeolite minerals are widely used in many countries in the following applications; (a) in air separation adsorption processes; (b)as desiccants; (c)in inorganic building materials; (d)in papermaking; (e)in fertilizers; (f)as soilconditioners-this application is based upon the ability of the zeolite to ion exchange with soil nutrients; (g)in the treatment of radioactive wastes; and (h)as adsorbents for toxic gases, etc. In the present paper, using natural zeolite mordenite treated with IN hydrochloric acid or IN sodium chloride solution as column packings, separation characteristics of argon, nitrogen, carbon monoxide, and methane gases have been studied by gas chromatography. By the use of mordenite treated with hydrochloric acid solution, the tailing peak of methane showed from untreated mordenite was satisfactorily reduced, although it was difficult to separate it from carbon monoxide with a column activated at $300^{\circ}C$. Using a column activated at $350^{\circ}C$, methane could be separated from carbon monoxide easily but only carbon monoxide eluted as a bad defined peak. Mordenite treated with sodium chloride solution was generally similar to chromatograms obtained by using the untreated mordenite. Both the above chemical treatments of mordenite had little effect on the separations of argon and nitrogen. The separations and the HETP values obtained from natural zeolite mordenite treated with continuously hydrochloric acid and sodium chloride solutions were almost identical with those obtained with synthetic molecular sieve 5A zeolite. On the other hand, the efficiency of column was good in the range 20~3Oml/min of the carrier helium gas rate.

• Journal of radiological science and technology
• /
• v.34 no.3
• /
• pp.239-244
• /
• 2011

In this study, we evaluated diffusion weighted imaging (DWI) to investigate whether the DWI parameters can predict characteristic parameters on pathologic specimens of tumor or not. CFPAC-1 was injected subcutaneously on the back flank of athymic nude mice (n=13) then two tumors were initiated on each mouse (2${\times}$13=26 tumors). The mice were sacrificed to make specimen immediately after initial MR imaging then were compared with the MR image. A dedicated high-field (7T) small-animal MR scanner was used for image acquisitions. A T1 and T2 weighted axial image using RARE technique was acquired to measure the T2 values and tumor size. DWI MR was performed for calculating ADC values. To evaluate tumor cellularity and determine the levels of MVD, tumor cells were excised and processed for H-E staining and immunostaining using CD31. T2 values and ADC values were computed and analyzed for each half of the tumors and compared to the correlated specimens slide. Median ADC within each half of mass was compared to the cellularity and MVD in the correlated area of pathologic slide. The mean of ADC value is $0.7327{\times}10^{-3}$ $mm^2/s$ and standard deviation is $0.1075{\times}10^{-3}$ $mm^2/s$. There is a linear relationship between ADC value and tumor necrosis (R2=0.697, p< 0.001). DW image parameters including the ADC values can be utilized as surrogate markers to assess intratumoral neoangiogenesis and change of the internal structure of tumor cells.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1052-1057
• /
• 2005

Recently, the ozone treatment of wasting activated sludge has become one of the effective and feasible process for the sludge reduction. The objective of this study is to investigate the availability of ozonized wasting sludge on external carbon sources 13r phosphorus release. Experiment results showed that the ozone treatment of activated sludge could produce a large amount of VFA such as acetic acid and isobutyric acid. For example, 50.24 mg/L acetic acid was produced with the ozone dose of 0.05 g $O_3/g$ SS, and 123.56 mg/L acetic acid with 0.5 g $O_3/g$ SS. The higher ozone dose was applied, the more VFA was produced from sludge reduction into a limited point. Finally, using ozonated sludge as only carbon source, the batch experiment, to measure phosphorus release rate in anaerobic condition were performed. The specific phosphorus release rates were investigated as 0.94, 1.37, 1.48, 1.68 mg P/g VSS/hr with ozone dose of 0.05, 0.1, 0.2, 0.5 g $O_3/g$ SS, respectively. Considering the degree of mineralization, VFA production, phosphorus release rate, and economical aspect, the optimal ozone dose for sludge reduction and using carbon sources ranged from 0.05 to 0.1 g $O_3/g$ SS.

• Journal of Technologic Dentistry
• /
• v.31 no.2
• /
• pp.23-30
• /
• 2009

All-ceramic restorations have gained acceptance among clinicians and patients because of their superior esthetics. Most all-ceramic systems have a 2-layer structure, using a weak veneering ceramic over a strong supporting core. often, failure of all-ceramic restorations occurs when the veneering ceramic fractures, exposing the core material. The purpose of this study was to compare the shear bond strength of heat press ceramic system (Zirpress) to zirconia core with various surface treatments. 10 metal cores and 50 zirconia cores were fabricated and divided into six groups according to surface treatment such as Zirliner application, aluminium oxide blasting, and 9.5% HF etching. Sixty specimens were prepared using Zirpress, veneered 8mm height and 3mm in diameter, over the zirconia cores (n=10). The shear bond strength test was performed in a universal testing machine with a crosshead speed of 1/min. Ultimate shear bond strength data were analyzed with One-way ANOVA and the Scheffe's test (p=.05). Within the limits of this study, the following conclusions were drawn: The mean shear bond strengths (MPa) were: 12.93 for $110{\mu}m$ aluminium oxide blasting/Rexillium III/IPS e.Max Zirpress; 14.92 for $50{\mu}m$ aluminium oxide blasting ${\pm}9.5%$ HF etching/Zirconis core/IPS e.Max Zirpress; 16.37 for $110{\mu}$ aluminium oxide blasting + 9.5% HF etching/Zirconis core/IPS e.Max Zirpress; 12.89 for $200{\mu}$ aluminium oxide blasting + 9.5% HF etching/Zirconis core/IPS e.Max Zirpress; 19.30 for 9.5% HF etching/Zirconis core/IPS e.Max Zirpress; 19.55 for Zirliner/Zirconis core/IPS e.Max Zirpress. The mean shear bond strength for ZNTZH (Zirliner/Zirconis core) and ZNTEH (9.5% HF etching/Zirconis core) were significantly superior to MS110H ($110{\mu}$ aluminium oxide blasting/Rexillium III) and ZS200EH ($200{\mu}$ aluminium oxide blasting + 9.5% HF etching/Zirconis core) (p<0.05).

• Journal of Animal Science and Technology
• /
• v.55 no.1
• /
• pp.25-32
• /
• 2013

The purpose of this study was to investigate the effects of mustard, which contains allyl isothiocyanate, on ruminal fermentation and methane emission in vitro. To this end, diluted ruminal fluid(30ml) was incubated anaerobically at $39^{\circ}C$ or 6, 12, and 24 h with or without seeds or powdered mustard. Either mustard seed or powdered mustard was weighed and serially (0, 3.33, 5.00, 6.67, and 8.33 g/L) mixed with ruminal fluid. Ammonia-N was increased (P < 0.05) by mustard treatment in a dose dependent manner. Regardless of concentration or form, mustard increased (P < 0.05) total VFA content but decreased (P < 0.01) pH compared to control group. Molar proportion of acetate (A) was decreased (P < 0.05) whereas propionate (P) was increased (P < 0.05) by mustard treatment, thereby A:P ratio was decreased (P < 0.05) compared to control group. Total gas production was increased (P < 0.01) in a linear manner by mustard treatment compared to control group. There was no effect of mustard powder, except 8.33 g/L level at 6 h, on methane emission. However, at 24 h, methane emission was reduced (P < 0.05) by 4.77% and 11.54% with 6.67 g/L and 8.33 g/L of mustard seeds supplementation, respectively. Altogether, these results suggest that mustard seeds containing allyl isothiocyanate may reduce methane production without disturbing ruminal fermentation.

• Applied Biological Chemistry
• /
• v.49 no.2
• /
• pp.91-96
• /
• 2006

Antioxidant activities and biological properties such as antimutagenic and cytotoxic effect of Phellinus linteus extracts from different extraction conditions were measured against Salmonella typhimurium and human cancer cell lines. DPPH free radical scavenging activities of the extracts were higher in the solutions extracted with ethanol (17.14) and ethanol after water (17.79), respectively. In the Ames test, ethanol extract of P. linteus alone did not exhibit any mutagenicity but showed substantial inhibitory effect against mutations induced by N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), 4-nitroquinoline-1-oxide (4NQO), and benzo $({\alpha})$ pyrene $(B({\alpha})P)$. The extracts of ethanol and ethanol after water of P. linteus $(200\;{\mu}g/plate)$ had the highest inhibitory effect of 61.5 and 60.9%, respectively, on the mutagenesis on S. typhimurium TA98 strain induced by $B({\alpha})P$. Extracted solutions of ethanol and ethanol after water of P. linteus showed high antimutagenic effect against MNNG, 4NQO, Trp-P-1 and $B({\alpha})P$, causing mutations in S. typhimurium TA100 strain. The anticancer effects of P. linteus extracts were investigated against human fibrosarcoma HT-29 and human hepatocellular carcinoma HepG2. The treatment of 0.5 mg/ml of ethanol, ethanol after water and water extracts of P. linteus had the highest cytotoxicity of 59, 57, 54%, respectively against HT-27 cell line, whereas low cytotoxicity effects were observed against HepG2 cell line in the range of $10{\sim}30%$. The ethanol and water extracts of P. linteus also showed the nitrate scavenging ability at different pHs. The ethanol extract showed higher nitrate-scavenging ability compared to water extract of P. linteus.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.555-563
• /
• 2004

The pH of beverages is known to be low and have, therefore, been implicated in the increasing incidence of erosion. Erosion is believed to be the predominant cause of teeth wear in children and young adults, although there will always be a contribution from attrition and abrasion. The aim of the present study was to evaluate the effect of yogurt on the progression of erosive demineralization in human enamel using demineralization model in vitro. In 4 yogurts, available on the market, pH, buffering capacity and the concentrations of calcium, phosphate and fluoride were determined. The buffering effect was determined by titration with NaOH. 50 milliliters of each drink was then titrated with 1M sodium hydroxide, added in 0.5 milliliters increments, until the pH reached about 7. Human deciduous enamel(n=40) samples were divided into four groups and exposed to 80ml of the yogurt for 30,60, 90 and 120min. Enamel surface microhardness(VHN) was examined before and after each exposure. 1. The average PH of fermented milk was 3.77 and this pH value was acidic enough to cause tooth erosion. 2. All of the fermented milks were found to be erosive(p<0.05) 3. The teeth exposed to the fermented milk all showed erosion like lesions and microhardness measurements showed that enamel surface hardness decreased proportionately with increased time of immersion in all tooth specimen groups. 4. After immersion for 30 and 60 minutes, reduction rate of microhardness values was not significantly different between the groups(p>0.05). However, after 90 and 120 minutes, reduction rate of each group was significantly different(p<0.05).

• Journal of Korean Society of Rural Planning
• /
• v.9 no.2 s.19
• /
• pp.19-28
• /
• 2003

It is the purpose of this study to investigate the change of stream water quality in upper stream of Dongjin river, and to give the basic information for the conservation of water quality. Water samples were taken periodically at 9 sampling sites during 8 months from March to October in 2002. The results of this study were as follows : 1. The water temperature and pH of stream water were ranged $9.0{\sim}29.4^{\circ}C,\;6.48{\sim}9.33$, respectively. The COD values of stream water was ranged from 0.60 to 19.06. The contents of T-N and T-P mainly affected by the livestock wastes, and agricultural activity were $1.88{\sim}6.74\;mg/L$, ND(not deleted)${\sim}0.50\;mg/L$, respectively. 2. The SS, DO and BOD values of stream water were ranged $0.4mg/L{\sim}274.0mg/L$, $0.5{\sim}6.0\;mg/L$, and $7.3{\sim}13.7\;mg/L$ respectively. 3. The cation is one of the important components in analysis of stream water quality. The contents of analysis, $Ca^{++},\;Mg^{++},\;Na^+$ and $K^+$ were ranged $1.96{\sim}11.08\;mg/L$, $1.21{\sim}6.16\;mg/L$, $3.38{\sim}18.44\;mg/L$, $1.12{\sim}7.96\;mg/L$, respectively. SAR was ranged $0.31{\sim}1.63$ below 2.0. The contents of cation showed in the order $Na^{++}>Ca^{++}>K^+>Mg^+$. 4. The contents of heavy metal Zn, Cu, and Pb were $ND{\sim}0.071\;mg/L$, $ND{\sim}0.012\;mg/L$, and $ND{\sim}0.043\;mg/L$, respectively. Cd was not detected in all samples. 5. As a result of these researches showed water quality in upper stream watershed of Dongjin river more affected by livestock wastes and living sewage than agricultural activity.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.56-56
• /
• 2001

The exogenous gene transfer by intracytoplasmic sperm injection (ICSI) procedure has been recently used to produce transgenic mice and pigs. Sperm-mediated DNA transfer has the potential to markedly simplify the generation of transgenic animals. This method may serve as an alternative to the pronucleus injection of DNA for the production of transgenic pigs. Therefore, in this study, we investigated the expression of transgene after co-injection of spermatozoon or sperm head with green fluorescent protein (GFP) gene into in vitro matured porcine oocytes. Spermatozoon and sperm head, that was obtained by sonication, were treated with 0.03% Triton X-100 to remove the membrane. They were preincubated with linearized pEGFP-N1 for 1 min, and then embryos cultured NCSU23 medium for 2.5 days after co-injected of sperm and DNA. We monitored expression of GFP in embryos under epifluorescent microscope. The remove of sperm membrane did not alter the developmental competence of embryos after ICSI. At 7 days following injection, the rates of blastocysts following injection of intact sperm (15.0%), and of sperm with disrupted membrane (14.2%) were higher than that following IVF (10.0%). Porcine oocytes injected with sperm which co-cultured with DNA concentration of 1, 0.1, and 0.01 ng were 60, 65.7 and 75% and 18.5, 37.4 and 22.2% for rates of cleavage and GFP expression, respectively. In vitro matured porcine oocytes injected with sperm and isolated sperm head resulted in 69 and 59.7% of cleavage rates, respectively The rates of embryo GFP expressed did not significantly different between sperm (20.4%) and sperm head (20.0%) injection. The transgenic embryos with the clusters of positive blastomeres were observed under fluorescent microscope. Most of embryos expressed GFP gene showed mosaicism. They showed GFP expression at 1/4, 2/4 and 3/4 of blastomeres at the 4-cell stage. Among these 4-cell embryos, the expression rate of 1/4 blastomere group (54.6%) was higher than the other groups (15.3-30.7%). These results indicate that membrane disrupted sperm could attach with exogenous DNA, and that this procedure may be useful to introduce foreign gene into porcine oocytes. Therefore, our data suggest that the ICSI car be a useful tool to efficiently produce transgenic pig as well as other mammals.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.579-585
• /
• 2014

This study was conducted to investigate liquid pig manure (LPM) application rates on the growth characteristics, yield, and feed value of whole crop barley in Yeongsangang and Saemangeum reclaimed tidal land. Electronic conductivity (EC), organic matter (OM), and available phosphate (Av. $P_2O_5$) increased in chemical properties of Yeongsangang and Saemangeum soil as raising LPM application level. As increasing LPM application level, exchangeable $Na^+$ significantly increased in Yeongsangang, while exchangeable $K^+$ significantly increased in Saemangeum. Plant height was not significantly different from LPM 100% to LPM 200% in Yeongsangang and in Saemangeum. Dry matter yield of whole crop barley increased steadily, but crop yield of LPM 200% in Yeongsangang ($10.5ton\;ha^{-1}$) was as much as that of LPM 150% ($10.0ton\;ha^{-1}$). Yield of LPM 200% ($11.2ton\;ha^{-1}$) in Saemangeum was similar to that of LPM 150% ($10.5ton\;ha^{-1}$). Crude protein (CP) increased depending on LPM application level, but total digestible nutrients (TDN) increased regardless of LPM application level. LPM 200% was the highest in TDN yield (Yeongsangang: $7.4ton\;ha^{-1}$, Saemangeum: $6.9ton\;ha^{-1}$), but there was no statistical difference between LPM 150% (Yeongsangang: $6.9ton\;ha^{-1}$, Saemangeum: $6.6ton\;ha^{-1}$) and LPM 200%. From the results described above, optimum rate of LPM for cultivating whole crop barley is considered 100% in Yeongsangang reclaimed tidal land and 150% in Saemangeum reclaimed tidal land, showing that the effect of LPM application is better in Segmentation than that in Yeongsangang for yield of whole crop barley.