• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.204-208
• /
• 1999

This study was carried out to investigate the chemical properties of rainwater in Taean area. The rainwater way collected for six months from May to Octotber in 1998, and analyzed its chemical composition. The ion balance and electric conductivity balance showed confidence to chemical analyses of rainwater. Distribution rates of pH of rainwater in Taean area were 43% and 38% in the range of pH $4.5{\sim}5.0$ and $5.0{\sim}5.6$, respectively. Among the 1mm fraction for initial 5mm of rainfall, ion concentration of initial rainwater (less than 1mm of rain) was higher than those of the later terms. The major ions in rainwater were $NH_4\;^+$ and $Ca_2\;^+$ for cations, and $SO_4\;^{2-}$ and $NO_3\;^-$ for anions. The pH value of rainwater showed the lowest level of 4.3 in August. The ratio of non-sea salt $SO_4\;^{2-}$ to $NO_3\;^-$ was 2.4.

• Journal of Korean Society of Forest Science
• /
• v.59 no.1
• /
• pp.67-91
• /
• 1983

In order to examine the alcohol production from softwoods (Pinus densiflora Sieb. et Zucc., Pinus rigida Miller, Larix leptolepis Gordon) and hardwoods (Alnus japonica Steud., Castanea crenata Sieb. et Zucc. Populus euramericana CV 214), chemical compositions were analyzed and conditions of acid hydrolysis with wood meals were established. Also strains which could remarkably decompose the cellulose were identified, and conditions of cellulase production of strains, characteristics of cellulase, and alcohol fermentation were examined. The results were summarized as follows. 1) In acid hydrolysis of wood, the high yield of reducing sugars was shown from 1.0% to 2.0% of hydrochloric acid and 2.0% of sulfuric acid. The highest yield was produced 23.4% at wood meals of Alnus japonica treated with 1.0% of hydrochloric acid. 2) The effect of raising the hydrolysis was good at $1.5kg/cm^2$, 30 times (acid/wood meal), and 45 min in treating hydrochloric acid and 30 min in treating sulfuric acid. 3) The pretreatments with concentrated sulfuric acid were more effective concentration ranged from 50% to 60% than that with hydrochloric acid and its concentration ranged from 50% to 60%. 4) The quantative analysis of sugar composition of acid hydrolysates revealed that glucose and arabinose were assayed 137.78mg and 68.24mg with Pinus densiflora, and 102.22mg and 65.89mg with Alnus janonica, respectively. Also xylose and galactose were derived. 5) The two strains of yeast which showed remarkably high alcohol productivity were Saccharomyces cerevisiae JAFM 101 and Sacch. cerevisiae var. ellipsoldeus JAFM 125. 6) The production of alcohol and the growth of yeasts were effective with the neutralization of acid hydrolysates by $CaCO_3$ and NaOH. Production of alcohol was excellent in being fermented between pH 4.5-5.5 at $30^{\circ}C$ and growth of yeasts between pH 5.0-6.0 at $24^{\circ}C$. 7) The production of alcohol was effective with the addition of 0.02% $(NH_2)_2CO$ and $(NH_4)_2SO_4$, 0.1% $KH_2PO_4$, 0.05% $MgSO_4$, 0.025% $CaCl_2$, 0.02% $MnCl_2$. Growth of yeasts was effective with 0.04-0.06% $(NH_2)_2CO$ and $(NH_4)_2SO_4$, 0.2% $K_2HPO_4$ and $K_3PO_4$, 0.05% $MgSO_4$, 0.025% $CaCl_2$, and 0.002% NaCl. 8) Among various vitamins, the production of alcohol was effective with the addition to pyridoxine and riboflavin, and the growth of yeasts with the addition to thiamin, Ca-pantothenate, and biotin. The production of aocohol was increased in 0.1% concentration of tannin and furfural, but mas decreased in above concentration. 9) In 100ml of fermented solution, alcohol and yeast were produced 2.201-2.275ml and 84-114mg for wood meals of Pinus densiflora, and 2.075-2.125ml and 104-128mg for that of Alnus japonica. Residual sugars were 0.55-0.60g and 0.60-0.65g for wood meals of Pinus densiflora and Alnus japonica, respectively, and pH varied from 3.3 to 3.6. 10) A strain of Trichoderma viride JJK. 107 was selected and identified as its having the highest activity of decomposing cellulose. 11) The highest cellulase production was good when CMCase incubated for 5 days at pH 6.0, $30^{\circ}C$ and xylanase at pH 5.0, $35^{\circ}C$. The optimum conditions of cellulase activity were proper in case of CMCase at pH 4.5, $50^{\circ}C$ and xylanase at pH 4.5, $40^{\circ}C$. 12) In fermentation with enzymatic hydrolysates, the peracetic acid treatment for delignification showed the best yields of alcohol and its ratio was effective with the addition of about 10 times. 13) The production of alcohol was excellent when wood meals and Koji of wheat bran was mixed with 10 to 8 and the 10g of wood meals of Pinus densiflora produced 2.01-2.14ml of alcohol and Alnus japonica 2.11-2.20ml.

• Korean Journal of Environmental Biology
• /
• v.18 no.3
• /
• pp.331-336
• /
• 2000

In order to examine the effect of SO$_2$, which is the major component of acid rain, on the peroxidase activity, rice (Oryza sativa) seedlings were grown on the media containing various concentrations of Na$_2$SO$_3$. Na$_2$SO$_3$ concentrations needed for the 50% inhibition of rice seed germination were determined to be 300$\mu\textrm{g}$/ml at pH 7, 8$\mu\textrm{g}$/ml at pH 5 and 2$\mu\textrm{g}$/ml at pH 3. Notably, about 8 fold and 4 fold increase of the specific activity of the enzyme were observed with the seedlings treated with 8$\mu\textrm{g}$/ml Na$_2$SO$_3$ at pH 5 and 2$\mu\textrm{g}$/ml Na$_2$SO$_3$ at pH 3, respectively. The effects of Cd and Pb on the peroxidase activities and chlorophyll contents were also examined. About 3.9 fold higher peroxidase activities were found at 0.03mM Cd, and the chlorophyll contents were reduced to 63% of the control seedlings. At 0.04mM Pb, 2.5 fold higher enzyme activities were found and the chlorophyll contents were reduced to 72%. Therefore, the increases of rice peroxidase activities might be involved in the defense mechanism of the cell against various environmental stresses such as Na$_2$SO$_3$, Cd and Pb. The effects of Cu and Fe, which are the inducers of oxidative stresses by the generations of reactive oxygen species, on the peroxidase activities were also investigated. About 57% and 65% activity losses were found at 0.5mM CuSO$_4$ and 0.5mM FeSO$_4$, respectively, and radical scavenger ethanol almost completely protected both inactivations. However, dimethyl sulfoxide, mannitol, thiourea and histidine showed different radical scavenging effects one another against Cu and Fe inactivation.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.303-308
• /
• 2004

A natural colorant was extracted from Cassia tara L. using buffer solutions (pH: 2-11) as extractants. The dyeing solution (Cassia tara L. extract) extracted using pH 9 buffer solution was found to give the highest K/S values of dyed fabrics. Cotton and silk fabrics were dyed with Cassia tara L. extract at $60^{\circ}C$ for 60 min with pre-treatment of various metal salts as mordants. It was found that Cassia tara L. extract was polygenetic dyestuffs and its major components were anthraquinones. Studies have been made on the effects of the kind of mordant on dyeing properties and colour fastnesses of cotton and silk fabrics. The K/S of cotton fabrics increased in the order of the dyeing using $FeSO_4 >CuSO_4> ZnSO_4> MnSO_4\cong Al_2(SO_4)_3 > NiSo_4 > none$, however, the K/S of silk fabrics increased in the order of the dyeing using $FeSO_4 > CuSO_4 > ZnSO_4\cong Al_2(SO_4)_3 > MnSO_4\cong NiSO_4 > none$. It was found that the K/S values of dyed fabrics were largely affected by the colour difference $(\DeltaE)$ between mordanted fabric and control fabric. However, they were not depended on the content of mordanted metal ion of the fabrics. Mordants $FeSO_4$ and CuSO_4$ for cotton fabric, $FeSO_4,\; CuSO_4,\; and\; Al_2(S0_4)_3$ for silk fabric were found to give good light fastness (rating 4).

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.145-151
• /
• 1996

The effectiveness of physiological or chemical acid - alkali solution was investigated as the method to control pH value of nutrient solution in hydroponics dynamically. Lettuces were cultivated using NH$_4$H$_2$PO$_4$ as physiological acid and NaNO$_3$ as physiological alkali or H$_2$SO$_4$ as chemical acid in dynamic control system. The pH of nutrient solution was controlled satisfactorily in the range of pH 5.5-6.5, regardless of treatments. Chemical acid changed pH of solution faster than chemical acid when supplied to the nutrient solution. Any of them did not show any harmful symptom. It is recommended that chemical acid is preferred during the growing stage and physiological acid like as NH$_4$H$_2$PO$_4$ is preferred from several days before harvest stage.

• Journal of the Korean Institute of Gas
• /
• v.8 no.4 s.25
• /
• pp.50-54
• /
• 2004

To examine the danger of explosion caused by decomposition explosion of Methyl Ethyl Ketone Peroxide, the mini cup pressure vessel tester (MCPVT) was used in the experiment. The maximum explosion pressure increased as the amount of $98\%H_2SO_4$ added to MEKPO increased from $0\%$ to $1\%,\;3\%$, and $5\%$, and the maximum pressure rising velocity increased as well. In addition, the temperature under the pressure at which decomposition starts decreased from $168.16^{\circ}C$ to $126.76^{\circ}C,\;91.21^{\circ}C$, and $81.25^{\circ}C$ as the amount of $H_2SO_4$ added increased.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.529-539
• /
• 2019

In this study, heavy metal removal and precipitation characteristics with pH change were studied for artificial acid mine drainage. Artificial acid mine drainage was prepared using sulfates of iron, aluminum, copper, zinc, manganese which contained in acid mine drainage from abandoned mines. The single and mixed five heavy metal samples of Fe, Al, Cu, Zn, and Mn were prepared at initial concentrations of 30 and 70 mg/L. Fe and Al were mostly removed at pH 4.0 and 5.0, respectively, and other heavy metals gradually decreased with increasing pH. Concentration changes with increasing pH show generally similar trend for single and mixed heavy metal samples. The effect of removing heavy metals from aqueous solutions is not related to the initial concentration and depends on the pH change. XRD were used for mineral identification of precipitates and crystallinity of the mineral tended to increase with increasing pH. The precipitates that produced by decreasing the concentration of heavy metals in the aqueous solution composed of Fe-goethite(FeOOH), Al-basaluminite(Al₄(SO₄)(OH)₁₀·4H₂O), Cu-connellite(Cu₁₉(OH)₃₂(SO₄)Cl₄·3H₂O) and tenorite(CuO), Zn-zincite(ZnO), and Mn-hausmannite(Mn₃O₄).

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.1028-1032
• /
• 1997

The strain No. 33, which produces cellulose-degrading enzyme, was isolated from soil. Yellow halo was identified when the culture supernatant of the strain was loaded onto agar plate containing 2.0% CMC using paper disc method. From scanning electron microscopic observation, the morphology of the stain was rod-shaped. For identification, several biochemical characteristics were tested, and this strain was identified to Bacillus sp. So, we named this strain as Bacillus sp. No. 33. The maximal growth was observed when the stain was cultured in the medium containing 1.0% glucose, 3.0% yeast extract, 0.5% $KH_2PO_4$, 0.02% $MgSO_4{\cdot}7H_2O$, pH 7.0 at $30^{\circ}C$ for 39 hours with shaking. The maximal enzyme production was accomplished using the medium containing 4.0% CMC, 2.0% yeast extract, 0.5% $KH_2PO_4$, 0.04% $MgSO_4{\cdot}7H_2O$, pH 7.0 at $30^{\circ}C$ for 42 hours with shaking.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.454-458
• /
• 2007

The removal characteristics of ionic species, such as $Ca^{2+}$, $Mg^{2+}$, $Sr^{2+}$, $SO{_4}^{2-}$, $NO{_3}^-$, and $Cl^-$ by adsorption on the alumina were investigated. Alumina precusor powders were prepared from $Al(NO_3)_3{\cdot}9H_2O$ and $NH_4OH$. Alumina materials prepared from the heat treatment in a furnace at $450{\sim}750^{\circ}C$ for 5 h were analysed using FT-IR and the Brunauer-Emmett-Teller (BET) method. The specific surface area of the product particles decreased significantly with treatment temperature. The adsorption capacities of $SO{_4}^{2-}$and $NO{_3}^-$ on alumina were 23 mg/g and 12.4 mg/g, respectively. But, removal efficiencies of $Cl^-$ were less than 4 mg/g. In general, the removal efficiencies of the anion species were decreased with increasing treatment temperature. The best anion removal efficiency was obtained when the alumina was treated under $450^{\circ}C$. Removal efficiencies of $Ca^{2+}$, $Mg^{2+}$, and $Sr^{2+}$ were increased with increasing treatment temperature.

• Microbiology and Biotechnology Letters
• /
• v.30 no.4
• /
• pp.325-331
• /
• 2002

investigated to maximize the production of fibrinolytic enzyme from Fomitella fraxinea mycelia. Among the tested media, Coriolus versicolor medium (CVM) showed the highest production for the enzyme. 2% galactose, 0.6% yeast extract and 0.1% $NaNO_3$, 0.1% $K_2HPO_4$, and 0.05% $MgSO_4$.$7H_2O$ as carbon, nitrogen, phosphorus, and inorganic salt sources resulted in the maximum level of the enzyme activity, respectively. The enzyme production from F. fraxinea was reached to highest level after the cultivation for 10 days at $25^{\circ}C$ and pH 9. The enzyme activity of culture supernatant was most active at $40^{\circ}C$ and pH 10. The activity of the enzyme was inhibited by phenylmethylsulfonylfluoride and aprotinin, suggesting that it is a serine protease.