• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.227-235
• /
• 2018

Along with the recent increase in traffic volume of vehicles, accidents involving rollover of vehicles have been rapidly increased, resulting in an increase casualties. And to prevent this, various technologies such as vehicle crash test equipment and analysis program development have been advanced. In this study, the applied vehicle model is FORD EXPLORER model, and PC-Crash program for vehicle collision analysis is used to predict the rollover accident behavior of SUV and the collision velocity. Compared with the actual rollover behavior of SUV through the FMVSS No 208 regulations, the analysis results showed similar results, the characteristics of the collision velocity and roll angle showed a tendency that the error rate slightly increased after 1000 msec. Then, as a result of considering using the database of NHTSA, it is shown that the rollover accident occur most frequently in the range of the collision velocity of 15~77 km/h and the collision angle of $22{\sim}74^{\circ}$. And it is possible to estimate the vehicle speed and collision time when the vehicle roof is broken by reconstructing the vehicle starting position, the roof failure position and the stop position by applying the actual accident case.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.1
• /
• pp.93-100
• /
• 2014

The banning of the use of antibiotics as feed additive has accelerated investigations of alternative feed additives in animal production. This experiment investigated the effect of pure citric acid or acidifier blend supplementation as substitute for antibiotic growth promoters on growth performance, fecal microbial count, and humoral immunity in weaned piglets challenged with Salmonella enterica serover Typhimurium and Escherichia coli KCTC 2571. A total of 60 newly weaned piglets (crossbred, 28-d-old; average 8 kg initial weight) were randomly assigned to four dietary treatments in a completely randomized design. Dietary treatments included NC (negative control; basal diet), PC (positive control; basal diet+0.002% apramycin), T1 (basal diet+0.5% pure citric acid), and T2 (basal diet+0.4% acidifier blend). All piglets were orally challenged with 5 mL of culture fluid containing $2.3{\times}10^8$ cfu/mL of E. coli KCTC 2571 and $5.9{\times}10^8$ cfu/mL of S. typhimurium at the beginning of the experiment. The PC group showed the highest ADG and ADFI, whereas gain:feed was improved in the PC and T1 group (p<0.05). All dietary treatments showed significant reduction in fecal counts of Salmonella and E. coli, compared to NC (p<0.05), with PC being better than T1 and T2. Significant elevation in fecal Lactobacillus spp. counts was shown by treatments with T1, T2, and PC, whereas Bacillus spp. counts were increased by treatment with T1 and T2 compared to NC and PC diet (p<0.05). Serum IgG concentration was increased by T1 diet (p<0.05), whereas IgM and IgA were not significantly affected by any of the dietary treatments (p>0.05). From these above results, it can be concluded that, as alternatives to antibiotics dietary acidification with pure citric acid or acidifiers blend did not fully ameliorate the negative effects of microbial challenges in respect of growth performance and microbial environment, however improved immunity suggested further research with different dose levels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.761-766
• /
• 2015

This study investigated the effect of protease on quality characteristics of sponge cake. Protease was used at levels of 0.0005 U (PC-1), 0.0010 U (PC-2), 0.0015 U (PC-3), and 0.0020 U (PC-4) for sponge cake preparation. Amylogram showed the setback was significantly decreased in comparison with the control (P<0.05). Height and baking loss rate of control sponge cake were $4.24{\pm}0.18cm$ and $12.01{\pm}0.29%$, respectively. PC-3 and PC-4 showed increased heights of $5.22{\pm}0.16$ and $5.24{\pm}0.11cm$ as well as slightly increased baking loss rates of $12.71{\pm}0.31%$ and $12.89{\pm}0.61%$, respectively. Specific volume and color difference measurements of control showed a specific volume of $3.53{\pm}0.06mL/g$, crust color difference of $53.05{\pm}0.28$, and crumb color difference of $29.84{\pm}0.52$. Measurements of specific volume, crust color, and crumb color of PC-3 and PC-4 were $4.18{\pm}0.02mL/g$, $56.19{\pm}0.84$, $29.05{\pm}0.43$, $4.21{\pm}0.02mL/g$, $56.85{\pm}0.43$, and $29.45{\pm}0.47$, respectively. Firmness measurements showed that the control had the highest firmness. PC-3 and PC-4 were effective at improving the shelf-life of sponge cake as indicated by reduced firmness. Sensory evaluation results demonstrated that all samples scored higher than the control. Throughout the results, the addition of protease increased volume and improved quality characteristics of sponge cake.

• The Korean Journal of Physiology and Pharmacology
• /
• v.14 no.3
• /
• pp.163-167
• /
• 2010

This study investigated the effects of the methanol extracts of Morinda citrifolia containing numerous anthraquinone and iridoid on phospholipase $A_2$ ($PLA_2$) isozyme. $PLA_2$ activity was measured using various $PLA_2$ substrates, including 10-pyrene phosphatidylcholine, 1-palmitoyl-2-[$^{14}C$]arachidonyl phosphatidylcholine ([$^{14}C$]AA-PC), and [$^3H$]arachidonic acid (AA). The methanol extracts suppressed melittin-induced [$_3H$]AA release in a concentration-dependent manner in RAW 264.7 cells, and inhibited $cPLA_2/sPLA_2$-induced hydrolysis of [$^{14}C$]AA-PC in a concentration- and time-dependent manner. A Dixon plot showed that the inhibition by methanol extracts on $cPLA_2$ and $sPLA_2$ appeared to be competitive with inhibition constants ($K_i$) of $3.7{\mu}g/ml$ and $12.6{\mu}g/ml$, respectively. These data suggest that methanol extracts of Morinda citrifolia inhibits both $Ca^{2+}$-dependent $PLA_2$ such as, $cPLA_2$ and $sPLA_2$. Therefore, Morinda citrifolia may possess anti-inflammatory activity secondary to $Ca^{2+}$-dependent $PLA_2$ inhibition.

• Journal of Environmental Science International
• /
• v.33 no.1
• /
• pp.17-25
• /
• 2024

This study aimed to determine the most suitable coir substrate mixing ratio for optimizing the growth and yield of the "lpduelkkae 1" cultivar. We comprehensively analyzed the physicochemical properties, growth, and yields of four different substrate combinations: perlite (coir with mixing ratios of 70:30 (PC30), 50:50 (PC50), and 30:70 (PC70)) and 100% coir (C100). The results revealed substantial differences in substrate properties. C100 exhibited the highest total porosity and the lowest solid phase, indicating excellent air permeability. The pH levels and electrical conductivity (EC) values ranged from 5.4-6.8 and 1.2-3.1 dS·m^-1, respectively. Leaf growth parameters, including length, width, and dry weight, showed positive correlations with high coir ratios, except for PC30. PC70 and C100 outperformed other substrates in stem growth, exhibiting superior stem diameter and fresh and dry weights. The quantity of marketable leaves was the highest in the C100 substrate. Furthermore, C100 comprised integrated levels of essential nutrients, such as Ca and Mg, owing to its high coir content. In conclusion, a coir ratio of approximately 70% (v/v) should be maintained in the substrate for creating an optimal cultivation environment. Furthermore, the selection of humidity-resistant varieties as well as precise nutrient and moisture management for different seasons and growth stages are crucial for a successful perilla leaf hydroponic cultivation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.14-22
• /
• 2022

In this study, a fire test was conducted to evaluate the fire performance of precast concrete (PC) slabs in an outdoor environment in response to the increase in fire incidents caused by the growth of warehouses. Prior to the field fire test, the tensile yield strength of the tendon at elevated temperatures was tested to analyze the mechanical properties. Also, by referring to previous studies, the thermal properties of tendon and the mechanical and thermal properties of concrete were investigated. A field fire test was conducted to analyze the structural and fire performance of two identical slabs with 50 and 150 mm bearing length. As the bearing length increased, deflection and horizontal displacement decreased. The fire test lasted for 200 minutes without the collapse of slabs, validating current codes. Based on the structural performance which maintained even with concrete spalling and rupture of some tendons, the bonded method is assumed to be practical in pre-tensioned PC slabs. The results of fire test are expected to be utilized in evaluating the fire performance of PC slabs in warehouses.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1356-1364
• /
• 2014

A new conjugated copolymer, poly{4,8-bis(triisopropylsilylethynyl)benzo[1,2-b:4,5-b']dithiophene-alt-4,7- bis(5-thiophen-2-yl)-5,6-difluoro-2-(heptadecan-9-yl)-2H-benzo[d][1,2,3]triazole} (PTIPSBDT-DFDTBTz), is synthesized by Stille coupling polycondensation. The synthesized polymer has a band gap energy of 1.9 eV, and it absorbs light in the range 300-610 nm. The hole mobility of a solution-processed organic thin-film transistor fabricated using PTIPSBDT-DFDTBTz is $3.8{\times}10^{-3}cm^2V^{-1}s^{-1}$. Bulk heterojunction photovoltaic cells are fabricated, with a conventional device structure of ITO/PEDOT:PSS/polymer:$PC_{71}BM$/Ca/Al ($PC_{71}BM$ = [6,6]-phenyl-$C_{71}$-butyric acid methyl ester); the device shows a power conversion efficiency (PCE) of 2.86% with an open-circuit voltage ($V_{oc}$) of 0.85 V, a short-circuit current density ($J_{sc}$) of 7.60 mA $cm^{-2}$, and a fill factor (FF) of 0.44. Inverted photovoltaic cells with the structure ITO/ethoxylated polyethlyenimine/ polymer:$PC_{71}BM/MoO_3$/Ag are also fabricated; the device exhibits a maximum PCE of 2.92%, with a $V_{oc}$ of 0.89 V, a $J_{sc}$ of 6.81 mA $cm^{-2}$, and an FF of 0.48.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2020

Purpose: The purpose was to compare shear bond strength (SBS) of three types of resin for temporary restoration to polyetherketoneketone (PEKK) depending on surface modification. Materials and Methods: Sixty disks made from PEKK were air-abraded with 110 ㎛ alumina particles (Cobra, Renfert GmbH, Hilzinge, Germany) and thirty specimens were divided into two groups each: PEKK without Visio.link (Bredent, Senden, Germany)(U) and with Visio.link (P). Resins for temporary restoration (polymethylmethacrylate; PMMA, polyethylmethacrylate; PEMA, bis-acryl composite resin) in the shape of a square with one side 3.2 mm were bonded to PEKK twenty respectively and classified into six groups (UM, UE, UC, PM, PE and PC). All specimens were stored in distilled water at 37℃ for 24 hours. SBS of each group was measured at a crosshead speed of 2 mm/min in universal testing machine. SBS was compared using one-way ANOVA and a Tukey HSD test (P = 0.05). Results: Group UM and group UE showed a significant difference in SBS with group UC (P < 0.05). Group PC showed a significant increase in SBS than group UC (P < 0.05). Conclusion: It is recommended to apply Visio.link to PEKK for adhering bis-acrylic composite resin, but not for PMMA and PEMA in clinical practice.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.4
• /
• pp.355-358
• /
• 2015

BACKGROUND: Changes in Korea's agricultural soil properties were analyzed at a four-year interval from 1999 to 2002 on a national scale and used as basis for the determination of the appropriate agricultural policy on maintaining food safety and soil quality. The scope of this study ideally requires sampling thousands of paddy, greenhouse, upland and orchard land across the country, however, due to limitations in economic and manpower resources, it was deemed necessary to reduce sampling site to greenhouse soil. In this study, we try to investigate the applicability of cultivated crops as criteria for selecting representing fields in greenhouse soils.METHODS AND RESULTS: Soil samples were collected from red pepper, oriental melon, watermelon and strawberry cultivated soil. Principal components analysis (PCA) was performed on soil chemical properties of the selected fields: pH, electron conductivity (EC), available phosphate (Av-P₂O₅), organic matter (OM), and exchangeable cation (Ex.-K, Ca, and Mg). Soil chemical properties of oriental melon cultivated soil was separated from red pepper, watermelon, and strawberry cultivated soil on PC1 and red pepper cultivated soil was separated from watermelon cultivated soil on PC2. Position on PC1 was strongly correlated with pH, Ex.-Ca and Ex.-Mg and position on PC2 was strongly correlated with OM and Av-P₂O₅.CONCLUSION: The soil chemical properties of greenhouse soil was assorted amongst the different crops. Therefore, the cultivated crops as a criteria for the selection of representative field in greenhouse soil would be used in the future.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.61-65
• /
• 1997

The electrochemical properties of LixCoyNi1-yO2 compounds (y=0.1, 0.3, 0.5, 0.7, 1.0) prepared by citrate sol-gel method have been investigated. The LixCoyNi1-yO2 compounds were annealed at 850 ℃ for 20 h after preheating at 650 ℃ for 6 h, in air. The x-ray diffraction (XRD) patterns for LixCoyNi1-yO2 have shown that these compounds have a well developed layered structure (R&bar{3} m). From the scanning electron microscopy of LixCoyNi1-yO2, particle size was estimated less than 5 μm. The Li//LixCoyNi1-yO2 electrochemical cell consists of Li metal anode and 1 M LiClO4-propylene carbonate (PC) solution as the electrolyte. The differences in intercalation rate of the LixCoyNi1-yO2 in the first charge/discharge cycle were less than 0.05 e-. The first discharge capacities of LixCoO2 and LixCo0.3Ni0.7O2 were ∼130 mAh/g and ∼160 mAh/g, respectively.