• Microbiology and Biotechnology Letters
• /
• v.41 no.4
• /
• pp.383-390
• /
• 2013

Several yeasts were isolated from flowers found in Gyonggi-do Province and Jeju island in Korea. They were then identified by a comparison of their PCR-amplified D1/D2 regions of 26S rDNA, internal transcribed spacer 1 and 2 inclusive of 5.8S rDNA, using the BLAST database. A total of fifty four yeast strains were isolated from wild flowers in Gyonggi-do and the genus Pseudozyma was noted as being dominant. A total of thirty two strains were isolated from Songaksan and Seongsan-ilchulbong in Jeju island and Sporobolomyces ruberrimus was seen to be dominant. The anti-gout xanthine oxidase inhibitory activities of the culture broths and cell-free extracts from eighty six yeast strains were then determined. The cell-free extracts of Pseudozyma hubeiensis 228-S-1 exhibited the highest xanthine oxidase inhibitory activity of 19.6%. The XOD inhibitor was also maximally produced when Pseudozyma hubeiensis 228-S-1 was cultured at $30^{\circ}C$ for 36h in YEPD medium.

• Journal of Environmental Science International
• /
• v.9 no.2
• /
• pp.137-144
• /
• 2000

The observations on the seasonal fluctuation and distributional characteristic of organic matters on surface sediments and its origin were carried out at the 25 stations in Keogeum-sudo, southern coast of Korean Peninsula from February to October in 1993. I made an analysis on the environmental factors for surface sediments such as temperature, ignition loss, chemical oxygen demand, pheopigment, total sulphide, water content, mud content in grain size, COD/IL ratio and COD/sulphide ratio. The results are as follows ; 1) The range of temperature on the surface sediments was between 6.2${\circ}C$ and 24.6${\circ}C$. The highest mean temperatuer of mud was 24.0${\circ}C$ in summer, the lowest 6.6${\circ}C$ in winter. 2) Ignition loss(IL) fluctuated between 1.2% in winter and 16.8% in spring, that is to say, the seasons of increasing in temperature were very high ignition loss. 3) Chemical oxygen demand(COD) showed the highest mean value of 20.52 mg/g dry in summer within the range of 15/46~32.78 mg/g dry, while showed the lowest of 5.79 mg/g dry in winter within the range of 7.4~17.39 mg/g dry. 4) Pheopigment concentrations showed the highest mean value of 4.85 $\mu\textrm{g}$/g dry in autumn within the range of 0.84~9.21 $\mu\textrm{g}$/g dry, while it did the lowest mean value of 1.97 $\mu\textrm{g}$/g dry in summer within the range of 0.23~4.83 $\mu\textrm{g}$/g dry. 5) Total sulphide (H2S) fluctuated between no detect(ND) in spring, and 2.43 mg/g dry in sutumn. The highest mean value was 0.68 mg/g dry in sutumn, the lowest was 0.16 mg/g dry in spring. 6) Water content(WC) and mud content in grain size showed the mean value of 43.2% within the range of 26.5~59.7% and 91.0% within the range of 57.8~99.2%, respectively. 7) By the analytical results on the source of organic matter, it had been dumped from the seaweed farms in Keogeum-sudo coastal waters.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.3
• /
• pp.207-214
• /
• 2012

This study was conducted to optimize the processing conditions, including the ingredient ratio and extraction time, for a water-soluble fraction of Alaska pollock head and non-forming sea tangle by response surface methodology. Our results indicated that the optimal independent variables for obtaining extracts with a high yield and desirable sensory characteristics were 1.32 for $X_1$ (extraction time), 1.36 for $X_2$ (sea tangle concentration) and 0.93 for $X_3$ (water volume) in coded values, and 5.48 h for $X_1$, 18.18% for $X_2$ and 6.86 times for $X_3$ in uncoded values. The predicted values of $Y_1$ (yield), $Y_2$ (TCA soluble-N) and $Y_3$ (overall acceptance) for extracts produced under these optimized conditions were 22.10%, 1.83 g/100 mL and 5.9, respectively, their experimental values were 21.4%, 1.7 g/100 mL and 5.7, respectively. No significant differences between the actual and predicted values were found.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.5
• /
• pp.607-618
• /
• 2013

Marine macroalgal community structures and characteristics of ocean environmental factors were examined seasonally at four sites in Jeju Island, Korea, from March to November 2012. A total of 71 macroalgal species were identified, including 9 green, 7 brown, and 55 red algae. Peyssonnelia capensis occurred at all study sites and in all seasons. The average annual biomass of seaweed was 991.84 g wet $wt/m^2$, with seasonal variations from 543.80 g in autumn to 1,284.17 $g/m^2$ in summer. A green alga, Codium coactum, was the dominant species, occupying 21.31% (211.39 $g/m^2$) of the total algal biomass in Jeju Island. Subdominant species were Ecklonia cava and Lithophyllum okamurae, comprising 20.85% (206.75 $g/m^2$) and 19.64% (194.75 $g/m^2$), respectively, of the total algal biomass in Jeju Island. The vertical distribution of subtidal seaweeds was represented by L. okamurae at 5 m depth, C. coactum at 10 m depth, E. cava at 5-10 m depth and P. capensis at the 20 m depth level. In the present study, crustose coralline algae, which predominated on barren ground, were subdominant species at all study sites. Community indices varied between 0.51-0.63 for dominance index (DI), 5.53-8.14 for richness index (R), 0.51-0.63 for evenness index (J'), and 2.04-2.32 for diversity index (H'). On the basis of seaweed biomass and community indices, Sinchang was the best preserved coastal area, showing maximal values in biomass, and evenness- and diversity-indices, and minimal value in the dominance index, representing stable environmental conditions. In contrast, the Onpyung and Topyeong sites, located near tourist venues such as Udo and Seogwipo were relatively poor habitats based on community indices and biomass. The present results could imply that climate changes alter seaweed community structure, and long-term monitoring of the study sites is required.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.1
• /
• pp.32-50
• /
• 2000

On the process of research in the plan on oriental medical participation in the industrial health sponsored by BK21 project, we carried out the oriental medical health examination program for workers during former half-year We reached the conclusion as follows, 1. The oriental medical health examination program is contents and formalities that should be determined by present industrial health system, based on the oriental medical system and scholastic character, and included probability of the western and oriental medical cooperation. 2. The oriental medical health examination program can promote capability of individual health management and productive power of workers, and it is capable to manage on the self-conscious symptoms and macroschophically approach to their environment 3. The oriental medical health examination program that we have developed, is flow as questionare, understanding of working environment, information of result and later management. It is composed of three fields as follow , first, use of pulse diagnostic apparatus, understanding of the health promotion life style, and diagnosis of the oriental medical doctor, second, analysis of constitution, third, photographing for understanding of the musculoskeletal disorders, questionare for musculoskeletal self-conscious symptoms, and diagnosis of oriental medical doctor. 4. The oriental medical health examination program that we have developed, progressive from the view point of health, makes the oriental medical doctor's roll more important. It is the first trial at the western and oriental medical cooperation and characterized by excellence about musouloskeletal disorders. But it need to be improved in aspects of time and specialist on the health examination, diagnostic apparatus, control of examinant and later management. So we think that it needs research on the employment of health examination specialist, establishment of later management system, development of significantly diagnosable standard and assessable form on the health examination, and contents of health examination on the western and oriental medical cooperation.

• Parasites, Hosts and Diseases
• /
• v.35 no.4
• /
• pp.283-290
• /
• 1997

A total of 32 human diphyllobothriasis cases have been reported so far in Korea, exclud- ing 21 egg-positive cases from stool examinations. Authors experienced five more human cases of DiphHllobothrium latum infection, especially infected due to eating raw flesh of redlip mullet, Lizc hoematocheiln. Five cases were neighbors residing in the Puchon area, Kyonggi-do, who ate raw mullets (L. hQematocheila) in a party in February 1996. The mul- lets were purchased at the Noryangjin fisheries market in Seoul. All of cases (2 males and 3 females) were 35 to 43 years old and healthy with the body weight range of 56-62 kg. They complained about gastrointestinal trouble and abdominal discomfort, but were in normal ranges of their hematology and urinalysis data. None revealed any sign of anemia The patients experienced natural discharge of a chain of segments before, and showed diphyllobothriid eggs in their stool specimens when they visited our laboratory. They were administered with praziquantel (15 mg/kg of body weight) and 30 g of magnesium sulfate as a purgative. Two whole worms with the scolices (310-340 cm in length; 8-13 mm in width) were expelled each from two out of five cases after anthelmintic treatment, and the others expelled the parts of strobilae without scolex. The worms were identified as D. Ictum, based on the following biological characters. external morphologies, coiling of uterus, the number of uterine loops, position of genital opening, morphologies of cirrus, cirrus sac and seminal vesicle on the histological sections, position of vagina and uterine pore , and microscopical and SEM morphologies of the eggs.

• Korean Journal of Veterinary Research
• /
• v.44 no.1
• /
• pp.15-21
• /
• 2004

This paper describes the development of $^{99m}Tc$ tricarbonyl cysteine as potential renal function diagnostic radiopharmaceutical and evaluation of its biological characteristics using experimental animals. l-Cysteine was labeled efficiently with $^{99m}Tc$ tricarbonyl precursor $([^{99m}Tc(CO)_3(H_2O)_3)]^{+})$ under 30 min heating at ${75^{\circ}C}$. Labeling yield and stability were analyzed by high performance liquid chromatography (HPLC). The biodistribution property of $^{99m}Tc$ tricarbonyl cysteine in mice and its dynamic imaging profiles in rabbits were carried out. To investigate the excretion mechanism of $^{99m}Tc$ tricarbonyl cysteine, tubular transport inhibition test with probenecid was adopted. $^{99m}Tc$ tricarbonyl cysteine was obtained with a high labeling yield under the moderate condition. The results of biodistribution experiments of $^{99m}Tc$ tricarbonyl cysteine in ICR mice at 3 and 90 min provided that $^{99m}Tc$ tricarbonyl cysteine was very highly accumulated in the kidney and bladder, thereby almost 99% of $^{99m}Tc$ tricarbonyl cysteine was excreted within 90 min post injection. The same results were confirmed by the whole body dynamic images for 30 minutes and static images in rabbits at given time intervals after injection. Renogram of $^{99m}Tc$ tricarbonyl cysteine in rabbits showed that its $T_{max}$ and $T_{1/2}$ of $^{99m}Tc$ tricarbonyl cysteine were $2.33{\pm}0.56$ and $4.30{\pm}0.79$ min, respectively. The $T_{max}$ of $^{99m}Tc$ tricarbonyl cysteine with probenecid pretreatment was $2.30{\pm}0.17$ min, whereas $T_{1/2}$ of that with probenecid pretreatment was $17.0{\pm}32.47$ min. $T_{1/2}$ of $^{99m}Tc$ tricarbonyl cysteine with probenecid pretreatment was significantly different, as compared to the result without probenecid (p<0.0001). The results showed that the excretion of $^{99m}Tc$ tricarbonyl cysteine was extremely affected by probenecid. Therefore, $^{99m}Tc$ tricarbonyl cysteine was rapidly excreted from the kidney principally by the tubular secretion.

• The Journal of the Korean dental association
• /
• v.58 no.7
• /
• pp.435-442
• /
• 2020

Porcelain is the first ceramic material to be introduced into dentistry. Porcelain jacket crown was introduced by Dr. Charles H Land in 1886, which was an excellent aesthetic dental restoration but has not been widely used due to high firing shrinkage and low tensile strength. Then metal-ceramic system, which combines the esthetic properties of ceramics and the mechanical properties of metals, was introduced and nowadays it is still used in dental clinical field. However, the metal-ceramic system has shown some problems, such as increased lightness by reflection of light at opaque layer, shadow beneath the gingival line due to the block-out of light by metal coping, exposure of metal in margin part, bond failure between metal and porcelain, oxidation of metal coping during firing the porcelain, etc. Recently, along with the advance of fabrication methods of dental ceramics, the all-ceramic restorations with high esthetic and mechanical properties has increased and gradually replaced metal-ceramic restorations. Especially, CAD/CAM technology has opened a new era in fabricating the dental ceramic restorations. This overview will take a look at the past, present and future possibility of the dental ceramic materials.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.12
• /
• pp.1742-1748
• /
• 2006

The experiment was conducted on 264 crossbred Karan-Fries (Holstein Friesian${\times}$Tharparkar) cows, over one year to explore the possibility of using milk urea (MU) concentration and milk protein content to monitor feeding adequacy under farm condition and to investigate the effects of different animal factors and season on MU concentration. Individual noon (1200 to 1300 h) milk samples were collected once in every month and analysed for urea and protein contents. Representative feed samples were also collected on the same day of milk collection and were analysed for CP content. A significant positive association (p<0.01) between MU concentration and milk yield was observed. MU concentrations (mg/dl) were found to be significantly (p<0.01) higher and lower in first lactation (44.8${\pm}$0.7) and in early lactation stage (40.7${\pm}$0.5), respectively. Average MU values were found to be significantly (p<0.01) higher in winter (50.7${\pm}$0.3) and lower in summer (32.9${\pm}$0.6). During the investigation, of the total MU observations, 50.3% were within the range of 30 to 50 mg/dl, 21.4% were <30 mg/dl and only 7.5% were >60 mg/dl. MU concentration was found to be associated significantly (p<0.05) with CP content of forages rather than concentrate. A close positive association (p<0.01) between MU level and daily milk protein (DMP) yield was observed during the investigation. The regression equation, DMP yield (g) = -24.6+33.5 daily milk yield (kg) +0.9 MU (mg/dl) was developed to establish the reference level of DMP yield. The result indicates that the effect of parity and stage of lactation may be ignored while interpreting MU values. However, reference MU values may be standardised separately for high milk yielders as level of milk yield contributes significantly to the variation of MU. The study revealed that the MU values together with DMP yield and milk protein content could be used as a potential non-invasive pointer to monitor feeding adequacy in dairy cows under farm conditions.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.5-10
• /
• 2014

Objective : When the pedicle screw insertion technique is failed or not applicable, C7 intralaminar screw insertion method has been used as an alternative or salvage fixation method recently. However, profound understanding of anatomy is required for safe application of the bilaterally crossing laminar screw at C7 in clinic. In this cadaveric study, we evaluated the anatomic feasibility of the bilateral crossing intralaminar screw insertion and especially focused on determination of proper screw entry point. Methods : The C7 vertebrae from 18 adult specimens were studied. Morphometric measurements of the mid-laminar height, the minimum laminar thickness, the maximal screw length, and spino-laminar angle were performed and cross-sectioned vertically at the screw entry point (spino-laminar junction). The sectioned surface was equally divided into 3 parts and maximal thickness and surface area of the parts were measured. All measurements were obtained bilaterally. Results : The mean mid-laminar height was 13.7 mm, mean minimal laminar thickness was 6.6 mm, mean maximal screw length was 24.6 mm, and mean spinolaminar angle was $50.8{\pm}4.7^{\circ}$. Based on the measured laminar thickness, the feasibility of 3.5 mm diameter intralaminar screw application was 83.3% (30 sides laminae out of total 36) when assuming a tolerance of 1 mm on each side. Cross-sectional measurement results showed that the mean maximal thickness of upper, middle, and lower thirds was 5.0 mm, 7.5 mm, and 7.3 mm, respectively, and mean surface area for each part was $21.2mm^2$, $46.8mm^2$, and $34.7mm^2$, respectively. Fourteen (38.9%) sides of laminae would be feasible for 3.5 mm intralaminar screw insertion when upper thirds of C7 spino-laminar junction is the screw entry point. In case of middle and lower thirds of C7 spino-laminar junction, 32 (88.9%) and 28 (77.8%) sides of laminae were feasible for 3.5 mm screw insertion, respectively. Conclusion : The vertical cross-sectioned area of middle thirds at C7 spinolaminar junction was the largest area and 3.5 mm screw can be accommodated with 77.8 % of feasibility when lower thirds were the screw entry point. Thus, selection of middle and lower thirds for each side of screw entry point in spino-laminar junction would be the safest way to place bilateral crossing laminar screw within the entire lamina. This anatomic study result will help surgeons to place the screw safely and accurately.