• Journal of Integrative Natural Science
• /
• v.9 no.1
• /
• pp.16-22
• /
• 2016

The optical and physical and characteristics of hydrogel ophthalmic lens polymerized with addition of 2,6-difluoropyridine, SiPc(silicon 2,9,16,23-tetra-tert-butyl-29H31H-phthalocyanine dihydroxide) and nanodiamond in the basic hydrogel material were evaluated. In particular, the utility of 2,6-difluoropyridine, SiPc and nanodiamond as a hydrogel ophthalmic lens material was investigated. 2,6-difluoropyridine, SiPc and nanodiamond were used as additives. And also, 2-hydroxyethyl methacrylate, acrylic acid, methyl methacrylate and a cross-linker EGDMA were copolymerized in the presence of AIBN as an initiator. The refractive index of 1.4348~1.4361, water content of 33.30~34.02%, UV-B transmittance of 4.77~67.50%, UV-A transmittance of 1.45~89.19% and visible transmittance of 32.12~92.21% were obtained. The results of hydrogel lens containing 2,6-difluoropyridine (add 5%) showed antibiosis for staphylococcus aureus. The produced copolymer is suitable for hydrogel soft ophthalmic lenses with antibiotic and anti-UV effect.

• Korean Journal of Microbiology
• /
• v.21 no.2
• /
• pp.95-102
• /
• 1983

The penicillin G acylase(pga) gene was cloned in the vector plasmid pKM $300(Ar^r,\;Tc^r,\;6.33kb)$ for the study of the structure and expression of the pga gene. This recombinant plasmid pPAKS-1 DNA(24.5 Kb) was cleaved into 2 fragments by restriction enzyme Eco R1.1fragment by BamH1, 4fragments by Hind III, and 2 fragments by Pst I. The pga gene was located on the Eco R1.Hind III-C fragement of pPAKS-1. The recombinant plasmids pPAKS-1 and pPAKS-2, in which the Hind III-B and Hind III-D fragments pPAKS-1 are deleted, are characterized. The results are summarized as follows : 1. Doubling times of bacterial strain bearing pPAKS-1 and pPAKS-2 are 90 and 60 minutes, respectively. 2. pPAKS-1 and pPAKS-2 are present at about 16-32 and 70 copies per cell, respectively, are 0.66 and 5.5 units, respectively, which represent 2-fold and 20-fold higher enzyme 4. pPAKS-1 is very unstable, but pPAKS-2 is stable.

• Electronics and Telecommunications Trends
• /
• v.32 no.4
• /
• pp.21-30
• /
• 2017

최근 직물 또는 유연 재질을 활용하여 높은 착용 편의성을 가지면서 사용자의 움직임을 방해하지 않도록 설계되어 활동성을 높인 근력보조 시스템의 연구 결과들이 발표되고 있다. 이러한 결과들은 특정 분야가 아닌 일반인 또는 고령자를 대상으로한 일상생활용 근력보조 슈트 개발 연구에 활용할 수 있을 것으로 기대되면서, 근력보조 슈트에 대한 관심 또한 높아지고 있다. 따라서 본고에서는 활용 분야별 근력증강 시스템의 개발 동향과 핵심 기술의 현황에 관하여 기술하고자 한다.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.790-795
• /
• 2001

Since the characteristics of combustion and pollutant in Diesel engines were mainly affected by the characteristics of in-cylinder gas flow and fuel spray, an understanding of those was essential to the design of the D.I. Diesel engines. The improvement of volumetric efficiency of air charging into combustion chamber is a primary requirement to obtain better mean effective pressure of an engine. Since the air resistances in intake and exhaust flow passages, valve lift and valve shape influence greatly to the volumetric efficiency, it is very important to investigate the flow characteristics of intake and exhaust port which develops air motion in the combustion chamber. This paper presents the results of an experimental investigation of steady flow through the various kinds of commercial cylinder head ports, and the development procedures of HHI's H21/32 prototype cylinder head ports.

• Electronics and Telecommunications Trends
• /
• v.28 no.1
• /
• pp.21-32
• /
• 2013

최근 녹색 성장을 위한 에너지 효율 증대, 스마트워크 실현, 기업 보안 강화 등의 요구들과 맞물려, 기업, 공공, 의료, 교육 등 많은 분야에서 인터넷상에 가상화된 개인 PC 환경을 구축하여 다양한 단말을 통해 언제 어디서나 업무 환경을 실현하는 가상 데스크톱 인프라(Virtual Desktop Infrastructure: VDI) 시스템의 도입이 증가하고 있고, 관련 시장 또한 확대되고 있다. 가상 데스크톱 서비스 구축은 많은 장점을 갖는 동시에 높은 투자 비용, 성능 등 해결해야 할 다양한 이슈들도 존재한다. 본고에서는 VDI 시스템에 대해 기술하고, 핵심 기술들의 연구 현황에 대해 소개하고자 한다.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.1
• /
• pp.26-32
• /
• 2008

Effects of annealing treatment on microstructure and mechanical property of co-sputtered TiNi thin films were studied. As-deposited films showed amorphous state. However, above annealing temperature of $500^{\circ}C$ martensite phase (B19'), precipitate phase ($Ti_2Ni$) and a small amount of parent phase ($B_2$) were present, and phase transformation behaviors were three multi-step phase transformations $B19^{\prime}{\rightarrow}B_2$ and $B_2{\rightarrow}R-phase$ and $R-phase{\rightarrow}B19^{\prime}$. Increase of martensite transformation temperature, increase of microhardness and Young's modulus of TiNi films annealed above $500^{\circ}C$ were discussed in terms of precipitate phase.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.8
• /
• pp.858-860
• /
• 2011

Production of biosurfactant can be substantially increased by the addition of precursors like vegetable oils, petroleum products, and other water-insoluble substances. Pseudomonas Ptm+ strain produces biosurfactant in the presence of hexachlorocyclohexane (HCH), which specifically emulsifies HCH, a recalcitrant organochlorine pesticide. Addition of previously produced crude biosurfactant by the same organism as a precursor instead of HCH increased production of biosurfactants with a decrease in the total fermentation time from 32 to 24 h. The main objective of this paper was to find alternatives for HCH as an inducer.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.1 s.63
• /
• pp.37-47
• /
• 2007

In order to improve the Quality of fermented soybean Doenjang was investigated. The samples were prepared and fermented by the koji made with A. oryzae, B. subtilis and B. natto strains, that the product added green tea powder with sanitary canned food. 1. The water content of sample was 50.30-42.14%, pH value 6.03-5.52 and total acidity, 3.01-3.87. 2. The reducing sugar content for samples was 9.35-7.81%, Amino-N, 7.96-9.21%. 3. In the sensory evaluation test, the good sensory qualify that was S-2 sample than to S-1 and S-3. 4. The heavy metals analyzed from sample cans, tin, iron and lead content were 27.31-29.04 ppm, 5.32-5.91 ppm and trace amount.

• 전기의세계
• /
• v.53 no.6
• /
• pp.32-36
• /
• 2004

한국형 고속전철은 국책과제인 G7(선도기술개발사업) 고속전철기술개발사업의 일환으로 개발되었다. 이로 인해 우리의 독자적인 기술이 해외 선진국과 경쟁할 수 있는 능력을 보여 줌은 물론, 21세기 국가철도망 요소 중 가장 중요한 한국형 고속전철차량을 국내 기술로 구축할 수 있게 되어, 향후 수입 대체, 관련 산업기술 파급 및 수출 증대 등 효과가 클 것으로 기대된다. 특히 고속전철의 핵심이라고 할 수 있는 주요 전장품을 자체 개발하였으며 300km/h 주행 성공 및 지속적인 안정화 시험을 통해 그 성능을 입증해 보이고 있다. 본 글에서는 한국형 고속전철의 주요 전장품인 주 전력 변환장치, 보조전원장치, 견인전동기의 주요 성능 및 특징에 대해 설명하고자 한다.(중략)

• Journal of the Korean Solar Energy Society
• /
• v.21 no.3
• /
• pp.25-32
• /
• 2001

The major purpose of this paper is to develop an uncertainty estimate for the calibration of thermopile instruments used to measure solar radiation parameters. We briefly describe the solar radiation parameters most often measured, instrumentation, reference standards, and calibration techniques. The bulk of the paper describes elemental sources of error and their magnitude. We then apply a standard error analysis methodology to combine these elemental error estimates into a statement of total uncertainty for the instrument calibration factor. Our results allow one to evaluate the accuracy of a radiometric measurement using thermopile instrumentation in the light of the application, such as engineering test evaluation or for validation of theoretical models.