• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1555-1558
• /
• 2002

This paper presents deposition and characterizations of microcrystalline silicon(${\mu}c$-Si:H) films prepared by hot wire chemical vapor deposition at substrate temperature below $300^{\circ}C$. The $SiH_4$ Concentration$[F(SiH_4)/F(SiH_4)+F(H_2)]$ is critical parameter for the formation of Si films with microcrystalline phase. At 6% of silane concentration, deposited intrinsic ${\mu}c$-Si:H films shows sufficiently low dark conductivity and high photo sensitivity for solar cell applications. P-type ${\mu}c$-S:H films deposited by Hot-Wire CVD also shows good electrical properties by varying the rate of $B_2H_6$ to $SiH_4$ gas. The solar cells with structure of Al/nip ${\mu}c$-Si:H/TCO/glass was fabricated with sing1e chamber Hot-Wire CVD. About 3% solar efficiency was obtained and applicability of HWCVD for thin film solar cells was proven in this research.

• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.268-275
• /
• 2003

The water-splitting process by the metal oxides using solar heat is one of the hydrogen production method. The hydrogen production process using the metal oxides (NiFe2O4/NiAl2O4,CoFe2O4/CoAl2O4, CoMnNiFerrite, CoMnSnFerrite, CoMnZnFerrite, CoSnZnFerrite) was carried out by two steps. The first step was carried out by the CH4-reduction to increase activation of metal oxides at operation temperature. And then, it was carried out the water-splitting reaction using the water at operation temperature for the second step. Hydrogen was produced in this step. The production rates of H2 were 110, 160, 72, 29, 17, $21m{\ell}/hr{\cdot}g-_{Metal\;Oxide}$ for NiFe2O4/NiAl2O4, CoFe2O4/CoAl2O4, CoMnNiFerrite, CoMnSnFerrite, CoMnZnFerrite, CoSnZnFerrite respectively in the second step. CoFe2O4/CoAl2O4 had higher H2 production rate than the other metal oxides.

• 한국세라믹학회지
• /
• 제41권8호
• /
• pp.567-572
• /
• 2004

The variation of the sintered density and grain size of UO$_2$ as a function of the Li$_2$O amount and sintering atmosphere was observed. Li$_2$O enhanced the grain growth of the UO$_2$ pellet in H$_2$, but rather hindered it in $CO_2$ atmosphere. Grain size of the UO$_2$ and UO$_2$-0.1 wt%Li$_2$O pellets was, respectively, 8 $\mu$m and 100 $\mu$m at 168$0^{\circ}C$ in the H$_2$ atmosphere, and that of each pellet was, respectively, 24 $\mu$m and 17 $\mu$m at the same temperature in the $CO_2$ atmosphere. As-received Li$_2$O powder, which had been composed of Li$_2$O and LiOH, was converted to the Li$_2$CO$_3$ phase after heating to 80$0^{\circ}C$ in $CO_2$. On the other hand, the Li$_2$O and LiOH phases remained unchanged in H$_2$ atmosphere. In the H$_2$, the as-received Li$_2$O powder began to evaporate at about 105$0^{\circ}C$ and then about 20 wt% residue was left at 150$0^{\circ}C$. But, most of the Li elements evaporated at 150$0^{\circ}C$ in the $CO_2$ atmosphere.

• 자원리싸이클링
• /
• 제22권1호
• /
• pp.42-47
• /
• 2013

페로니켈 슬래그는 페로니켈 제조 공정의 부산물이다. 페로니켈 슬래그가 마그네슘 산화물 및 규소 산화물 등 유용 성분을 갖는데도 불구하고 대부분이 폐기되거나 골재로 사용된다. 이 연구는 $H_2SO_4$ 용액을 사용하여 Mg 이온을 추출하고, NaOH 용액을 사용하여 불순물 제거 및 고순도의 $Mg(OH)_2$를 얻으려고 하였다. $H_2SO_4$ 용액에 의해 Mg 이온은 Fe 이온 및 기타 페로니켈 슬래그 구성 성분과 함께 추출되었다. 불순물을 제거하고 고순도의 $Mg(OH)_2$를 얻기 위해서는 침출액의 pH 조절이 중요하다. 불순물은 가수분해에 의한 수산화물 침전으로 제거하였다. 이 과정 후, 여과액에 NaOH를 첨가하여 고순도의 $Mg(OH)_2$을 얻었다.

• Nuclear Engineering and Technology
• /
• 제33권4호
• /
• pp.386-396
• /
• 2001

Mixtures Of AUC-UO$_2$and Gd$_2$O$_3$ Powders doped With Cr$_2$O$_3$ or Cr$_2$O$_3$-SiO$_2$ were Pressed and sintered at 1730 t in hydrogen gas witk various water-vapor contents. The density of UO$_2$- 6wt% Gd$_2$O$_3$ pellets can be increased from 91% TD to 94.5% TD in 1 vol% $H_2O$-H$_2$ gases by the addition of 0.02wt% Cr$_2$O$_3$-(0.01~0.04) wt% SiO$_2$. The magnitude of density increase is much larger in (1~3 vol%) $H_2O$-H$_2$ gases than in 0.05 vol% $H_2O$-H$_2$ gas. The densification of U0$_2$- Gd$_2$O$_3$ compact is significantly delayed in the temperature range between 1300 and 1500 t , but that of compacts with Cr$_2$O$_3$-SiO$_2$ is not. The role of Cr$_2$O$_3$ and SiO$_2$ in densification is discussed.

• 태양에너지
• /
• 제10권2호
• /
• pp.38-43
• /
• 1990

본 연구는 염화칼슘6수화물($CaCl_2{\cdot}6H_2O$)을 온돌판넬에 적용하여 가열시간에 따른 잠열재판넬의 축열 및 방열특성을 조사하기 위하여 같은 크기의 실험동($1.8m^L{\times}1.8m^W{\times}1.8m^H$)을 지었다. 잠열재판넬에 적용할 알루미늄 용기는 $1.6cm^T{\times}9cm^W{\times}80cm^H$ 크기로 제작하여 염화칼슘6수화물(1.25kg)을 충진시켰다. 잠열재인 염화칼슘6수화물을 넣은 온돌판넬은 실내공기온의 변화폭을 줄이고, 잠열재의 상변화과정에서 방열되는 시간은 축열에 필요한 가열시간의 $2{\sim}4$배 정도였다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2329-2333
• /
• 2022

Base metal corrosion forms a significant issue during the chemical decontamination of the primary coolant loop in nuclear power plants as it is directly related to the economic and safety viability of decommissioning. In this technical note, potentiodynamic evaluations of several base metals (304 stainless steel, SA106 Grade B carbon steel, and alloy 600) were performed to determine their corrosion behavior during the hydrazine (N₂H₄)-based reductive ion decontamination (HyBRID) process. The results suggested that N₂H₄ protected the surface of the base metals in the HyBRID solution, which is primarily composed of H₂SO₄. The corrosion resistance of the carbon steel was further improved through the addition of CuSO₄ to the solution. The corrosion rate of carbon steel in the H₂SO₄-N₂H₄-CuSO₄ solution was lower than that exhibited in an oxalic acid solution, a commonly used reaction medium during commercial decontamination processes. These results indicate the superiority of the HyBRID process with respect to the base metal stability.

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.87-106
• /
• 2024

Vehicle-to-Home (V2H) and Home Centralized Photovoltaic (HCPV) systems can address various energy storage issues and enhance demand response programs. Renewable energy, such as solar energy and wind turbines, address the energy gap. However, no energy management system is currently available to regulate the uncertainty of renewable energy sources, electric vehicles, and appliance consumption within a smart microgrid. Therefore, this study investigated the impact of solar photovoltaic (PV) panels, electric vehicles, and Micro-Grid (MG) storage on maximum solar radiation hours. Several Deep Learning (DL) algorithms were applied to account for the uncertainty. Moreover, a Reinforcement Learning HCPV (RL-HCPV) algorithm was created for efficient real-time energy scheduling decisions. The proposed algorithm managed the energy demand between PV solar energy generation and vehicle energy storage. RL-HCPV was modeled according to several constraints to meet household electricity demands in sunny and cloudy weather. Simulations demonstrated how the proposed RL-HCPV system could efficiently handle the demand response and how V2H can help to smooth the appliance load profile and reduce power consumption costs with sustainable power generation. The results demonstrated the advantages of utilizing RL and V2H as potential storage technology for smart buildings.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.111.2-111
• /
• 2002

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.451-457
• /
• 2011

Purple non-sulfur (PNS) bacterium $Rhodobacter$ $sphaeroides$ KD131 was studied with the aim of achieving maximum hydrogen production using various carbon and nitrogen sources at different pH conditions. Cells grew well and produced hydrogen using $(NH_4){_2}SO_4$ or glutamate as a nitrogen source in combination with a carbon substrate, succinate or malate. During 48h of photo-heterotrophic fermentation under 110$W/m^2$ illumination using a halogen lamp at $30^{\circ}C$, 67% of 30mM succinate added was degraded and the hydrogen yield was estimated as 3.29mol $H^2$/mol-succinate. However, less than 30% of formate was consumed and hydrogen was not produced due to a lack of genes coding for the formate-hydrogen lyase complex of strain KD131. Initial cell concentrations of more than 0.6g dry cell weight/L-culture broth were not favorable for hydrogen evolution by cell aggregation, thus leading to substrate and light unavailability. In a modified Sistrom's medium containing 30mM succinate with a carbon to nitrogen ratio of 12.85 (w/w), glutamate produced 1.40-fold more hydrogen compared to ammonium sulfate during the first 48h. However, ammonium sulfate was 1.78-fold more effective for extended cultivation of 96h. An initial pH range from 6.0 to 9.0 influenced cell growth and hydrogen production, and maintenance of pH 7.5 during photofermentation led to the increased hydrogen yield.