• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.413-419
• /
• 2008

The susceptibility of five stink bugs species collected soybean fields in Milyang in 2006 to seven insecticides was evaluated using electric auto-sprayer. The insecticide deltamethirn had the lowest median lethal concentration ($LC_{50}$) of 0.4 to 2.3 ppm regardless of stink bugs species while phenthoate had the highest concentration for one-banded stink bug (Piezodorus hybneri), green stink bug (Nezara antennata), sloe bug (Dolycoris baccarum), and brown marmorated stink bug, (Halyomorpha halys); and fenthion for bean bug (Riptortus clavatus). The average $LC_{50}$ for stink bugs to seven insecticides was lowest at 7.5 ppm for R. clavatus, followed by 16.6 ppm for H. halys, 17.6 ppm for D. baccarum, 19.1 ppm for N. antennata, and 28.4 ppm for P. hybneri. The relative tolerance ratio (TR), which is the TR of 90 percent lethal concentration ($LC_{90}$) of stink bugs to the recommended concentration, was the lowest in fipronil for R. clavatus, P. hybneri and D. baccarum; fenitrothion for N. antennata; and fenthion for H. halys. The relative average TR was lowest at 0.09 for R. clavatus, followed by 0.26 for D. baccarum, 0.30 for N. antennata, 0.37 for P. hybneri, and 0.39 for H. halys. Therefore, insecticides susceptibility was highest for R. clavatus and lowest for P. hybneri while the relative average TR was lowest for R. clavatus and highest for H. halys. Accordingly, it is expected that stink bugs can be effectively controlled with by spraying insecticides in soybean field because the relative average TR value of stink bugs was below 1.0, indicating high susceptibility of stink bugs to insecticides.

• Clean Technology
• /
• v.12 no.2
• /
• pp.67-77
• /
• 2006

A simple dual sludge process, called as $KNR^{(R)}$ (Kwon's Nutrient Removal) system, was developed for small sewage treatment. It is a hybrid system that consists of an UMBR (Upflow multi-layer bioreactor) as anaerobic and anoxic reactor with suspended denitrifier and a post aerobic biofilm reactor, filled with pellet-like media, with attached nitrifier. To evaluate the stability and performance of this system for small sewage treatment, the pilot-scale $KNR^{(R)}$ plant with a treatment capacity of $50m^3/d$ was practically applied to the actual sewage treatment plant, which was under retrofit construction during pilot plant operation, with a capacity of $50m^3/d$ in a small rural community. The HRTs of a UMBR and a post aerobic biofilm reactor were about 4.7 h and 7.2 h, respectively. The temperature in the reactor varied from $18.1^{\circ}C$ to $28.1^{\circ}C$. The pilot plant showed stable performance even though the pilot plant had been the severe fluctuation of influent flow rate and BOD/N ratio. During a whole period of this study, average concentrations of $COD_{cr}$, $COD_{Mn}$, $BOD_5$, TN, and TP in the final effluent obtained from this system were 11.0 mg/L, 8.8 mg/L, 4.2 mg/L, 3.5 mg/L, 9.8 mg/L, and 0.87/0.17 mg/L (with/without poly aluminium chloride(PAC)), which corresponded to a removal efficiency of 95.3%, 87.6%, 96.3%, 96.5%, 68.2%, and 55.4/90.3%, respectively. Excess sludge production rates were $0.026kg-DS/m^3$-sewage and 0.220 kg-DS/kg-BOD lower 1.9 to 3.8 times than those in activated sludge based system such as $A_2O$ and Bardenpho.

• Applied Biological Chemistry
• /
• v.23 no.1
• /
• pp.64-72
• /
• 1980

Industrial wastes from pulp and food plants were treated with microorganisms to clarify organic waste-water and to produce cells as animal feed, and results were summarized as follows. (1) Waste-water from pulp, beer, bread yeast, and ethanol distillation plants contained $1.4{\sim}1.5%$ of total sugar, $0.25{\sim}0.35%$ nitrogen, and biological oxygen demand (BOD) was $400{\sim}25,000$, chemical oxygen demand (COD), $500{\sim}28,000$, and pH, $3.8{\sim}7.0$. The BOD and COD were highest in waste-water from ethanol distillation plants among others. (2) Bacterial and yeast counts were $4{\times}10^4-1{\times}10^9,\;2{\times}10^2-7{\times}10^4/ml$ in waste-water. (3) Bacteria grew better in pulp waste and yeasts in beer, bread yeast, and ethanol distillation waste. (4) Saccharomyces cerevisiae SAFM 1008 and Candida curvata SAFM 70 were the most suitable microorganisms for clarification of ethanol distillation waste. (5) When liquid and solid waste from ethanol distillation were treated with microbial cellulase, xylanase, and pectinase, solid waste was reduced by 36%, soluble waste was increased, and recuding sugar content was increased by 1.3 times which provided better medium than untreated waste for cultivation of yeasts. (6) Optimum growth conditions of the two species of yeast in ethanol distillation waste were pH 5.0, $30^{\circ}C$, and addition of 0.2% of urea, 0.1% of $KH_2PO_4$ and 0.02% of $MgSO_4$. (7) Minimum number of yeast for proper propagation was $1.8{\times}10^5/ml$. (8) C. curvata70 was better than cerevisae for the production of yeast cells from ethanol distillation waste treated with microbial enzymes. (9) S. cerevisiae produced 16 g of dried cell per 1,000ml of ethanol distillation waste and reduced BOD by 46%. C. curvata produced 17.6g of dried cell and reduced BOD by 52% at the same condition. (10) Yeast cells produced from the ethanol distillation waste contained 46-52% protein indicating suitability as a protein source for animal feed.

• Korean Journal of Ichthyology
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2007

The effect of water temperature (T) and body weight (W) on the oxygen consumption of the fasted black rockfish, Sebastes schlegeli was investigated to provide empirical data for the culture management and bioenergetic growth model of this species. The mean wet body weights of two fish groups used for the present experiment were $12.9{\pm}2.7g$ ($mean{\pm}SD$) and $351.1{\pm}9.2g$. The oxygen consumption rate (OCR) was measured under three water temperature regimes (15, 20 and $25^{\circ}C$) at an interval of 5 minutes for 24 hours using a continuous flow-through respirometer. In each treatment three replicates were set up and 45 fish in small size groups and 6 fish in large size groups were used. The OCRs increased with increasing water temperature in both size groups (p<0.001). Mean OCRs at 15, 20 and $25^{\circ}C$ were 414.2, 691.5 and $843.8mg\;O_2\;kg^{-1}h^{-1}$ in small size groups, and 182.0, 250.7 and $328.2mg\;O_2\;kg^{-1}h^{-1}$ in large size groups, respectively. The OCRs decreased with increasing body weights in three water temperature groups (p<0.001). The mass effect on metabolic rate can be expressed by the power of 0.69~0.75. The data are best described by the relationship: OCR=89.12+28.79T-1.17W. $Q_{10}$ values ranged 1.90~2.79 between 15 and $20^{\circ}C$, 1.49~1.71 between 20 and $25^{\circ}C$, and 1.80~2.03 over the full temperature range, respectively. The energy loss by metabolic cost increased with increasing water temperature and decreasing body weight (p<0.001). Mean energy loss rates by oxygen consumption at 15, 20 and $25^{\circ}C$ were 282.9, 472.3 and $576.3kJ\;kg^{-1}d^{-1}$ in small size groups and 124.3, 171.3 and $224.1kJ\;kg^{-1}d^{-1}$ in large size groups, respectively.

• Journal of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.192-199
• /
• 1964

Seasonal variations of the contents of some chemical constituents of the estuary water at two definite stations of the laver bed in Nack Dong River have been determined over one tidal cycle in spring tide from Nov. 1962 to Oct. 1963. The ranges of annual variations of the contents at station 1 and station 2 are as follows: water temp. $2.2-30.8^{\circ}C$, $3.3-28.0^{\circ}C$; pH 7.8-8.5, 7.9-8.4; chlorosity 0.025-19.66 g/l, 4.31-19.56 g/l; magnesium 0.00355-1.565 g/l, -1.524 g/l; calcium 0.00557-0.482 g/l, - -0.590 g/l; saturation % of dissolved oxygen 71.8-123.2%, 88.2-113.8%; silicate-Si 8.00-125.5 ${\mu}$g-at./l, 6.70-100.5 ${\mu}$g-at./l; phosphate-P 0.12-1.47 ${\mu}$g-at./l, 0.11-1.09 ${\mu}$g-at./l; ammonia-N 4.88-25.45 ${\mu}$g-at./l, 4.12-17.58 ${\mu}$g-at./l; nitrite-N 0.07-0.75 ${\mu}$g-at./l, 0.08-0.58 ${\mu}$g-at./l; nitrate-N 2.11-6.89 ${\mu}$g-at./l, 1.85-7.43 ${\mu}$g-at./l each. The annual tidal variations of the constituents at station 1 are more remarkable than of station 2. The chlorosity, magnesium and calcium contents are decreased nearing the slack after ebb, and increased abruptly then one hour after the slack. The contents of the other constituents are varied according to the chlorosity variety. The values of pH, chlorosity, magnesium and calcium contents are lower in summer than winter, while the difference of seasonal variations of the % saturation of dissolved oxygen is not remarkable. The phosphate-P and total nitrogen contents have a tendency of increasing within a definite range, while the silicate-Si increase proportionally, to the increasing of mixing percentage of fresh water. The average values of Si/P and N/P are several times greater than of the normal in sea water. The chemical composition considered from the value of Mg/Cl or Ca/Cl of estuarine water varies according to the variety of chlorosity, even at the high chlorosity of 19 g/l.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.228-234
• /
• 2016

The aim of this study was to develop pharmaceutical dosage forms with a bi-phasic drug using a double extrusion approach. Hot melt extrusion was performed using a co-rotating twin-screw extruder. The. 1st melt extrusion was performed using polymer with a relatively higher Tg, such as HPMC and the 2nd melt extrudate was obtained using the 1st extrudate and polymers with a lower Tg, such as HPMC-AS and PEO. In addition, the formulation with all the content in the same proportion as the double extudate was produced using single extrusion for comparison. Physical characterization was performed on the formulations employing differential scanning calorimetry (DSC). In vitro release tests were studied using a USP Type-I apparatus at $37{\pm}0.5^{\circ}C$ and 100 rpm. The similarity factor (f2) was also used to check the difference statistically. The DSC results indicated that the crystallinity of ibuprofen was changed to an amorphous state after extrusion in both double and single melt extrusion. Double melt extrudate with ibuprofen showed the desired release in acidic media (pH 1.2) in the first two hours and basic (pH 6.8) during six hours. Double melt extrudate with glimepiride showed faster release in 60 min of over 80%, whereas the single extrudate with glimepiride showed retarded release due to the interaction with HPMC. The similarity factor(f2) value was 28.5, which demonstrates that there were different drug release behavior between the double and single extrusion. Consequently, the double melt extrudated formulation was robust and gave the desired drug release pattern.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.226-232
• /
• 2019

The biological wastewater treatment is more eco-friendly and can be used effectively in wastewater for a variety of purposes than that of the conventional treatment. In particular, the wastewater treatment using microalgae in biological treatment processes has attracted great attention due to its ability to remove economically nutrients from wastewater and have many advantages as a renewable energy source. This study was investigated to establish the optimal growth conditions for microalga Scenedesmus obliquus. Additionally, the removal efficiencies of nutrients (N, P) and heavy metals (Cu, Zn) from the synthetic wastewater were evaluated. As a results, the optimal growth conditions were established at $28^{\circ}C$, pH 7, and light and dark cycle of 14 : 10 h. In the evaluation of nutrient removal efficiencies at each concentrations of 500, 1,000, 5,000, and 10,000 mg/L, the removal rates were 17.6~70% N and 8.4~34% P in the single treatment and 12.0~58.0% N and 3.0~40.3% P in the binary mixture treatment. In addition, the evaluation of heavy metal removal efficiencies at each concentrations of 10, 30 and 50 mg/L, the removal rates were 13.7~40.3% Cu and 10.0~30.0% Zn in the single treatment and 16.0~40.0% Cu and 12.0~20.0% Zn in the binary mixture treatment. Based on the results of the study, it appears that Scenedesmus obliquus can be used for the removal of nutrients and heavy metals from the swine wastewater.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.6
• /
• pp.906-914
• /
• 2009

The Korean Society of Animal Science (KSAS) was officially born on October 8, 1956 under the leadership of Professor Sang W. Yun of Seoul National University, Seoul, Korea a few years after the end of the Korean War. At that time, there were 0.9 million Korean native cattle, 1.3 million pigs and 8.9 million chickens in Korea. Per capita income for Korea (US$ 66) or China (US$ 59) was about 10% of Asian's average income (US$ 513) in 1956. Korea produced less than 0.2 million M/T of formula feed and consumed 6.1 kg/person/year of animal products. One could say that Korea was an example of an under-developed country in the world. Although the first issue of the Proceedings of the KSAS was published on October 28, 1958, regular quarterly journals of the KSAS were not published until March 1, 1969. Major activities other than publishing its journal were: holding an annual meeting and/or scientific forum at national or international level. The Asian-Australasian Association of Animal Production Societies (AAAP) was founded on September 1, 1980 at Kuala Lumpur, Malaysia with founding members from Australia, Indonesia, Japan, Korea, Malaysia, NZ, Philippines and Thailand. Thirteen AAAP Animal Science Congresses have been held in its 28 year history. Hosting countries were Malaysia (1980), Philippines (1982), Korea (1985), NZ (1987), Taiwan (1990), Thailand (1992), Indonesia (1994), Japan (1996), Australia (2000), India (2002), Malaysia (2004), Korea (2006) and Vietnam(2008). In 1988, significant progress of the AAAP was made by creating an official English journal of the AAAP entitled "Asian-Australasian Journal of Animal Sciences (AJAS)" under the initiative of the KSAS. This journal is now published monthly and distributed to more than 50 countries in the AAAP region and the world. It should be mentioned that the KSAS was able to successfully host the $3^{rd}$ AAAP Animal Science Congress in 1985 and the 12th in 2006, as well as the $8^{th}$ WCAP in 1998. During the last 50 years of KSAS history, per capita income of Korea increased to US$ 17,690 (268 fold), formula feed production increased to 15 million M/T (97 fold) and consumption of animal products increased to 105 kg/person/year (17 fold). Cattle, pig and chicken numbers also increased to 2.5 million (2.8 fold), 9 million (7.4 fold) and 119 million (13 fold). This trend was also found for China and Asia, even if the rate of growth was slightly lower than that of Korea. It is expected that a similar rate of growth in economics, animal numbers, formula feed production and animal protein intake will likely be achieved by other Asian countries in the $21^{st}$ century with somewhat lower rate of development than that of Korea.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.36-41
• /
• 2018

This paper presents an implementation of a millimeter-wave(W band) multiflare-angle horn antenna. The proposed antenna is a multimode dual-polarized square horn having equal E- and H-plane beamwidths and consists of a multimode generating section, a four-square-waveguide exciter, orthomode transducers, and power combiners for the sum pattern formation. The antenna structure has been designed to allow for easy fabrication and the designed antenna has been fabricated to a precision of ${\pm}0.02mm$ by layer-by-layer machining and diffusion bonding. The input reflection coefficient and the radiation pattern of the fabricated antenna have been measured using a network analyzer and a far-field test facility. Measurements show that the proposed antenna has 17.7~18.3 dBi gain, $25.2{\sim}28.5^{\circ}$ beamwidth, and an input VSWR between 1.02~1.75, within ${\pm}0.5GHz$ from the center frequency.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.95-98
• /
• 2007

In this paper, the magnetic properties and the annealing behavior of spin valve structures with Mo(MoN) underlayers were studied for various underlayer thickness. The spin valve structure was Si substrate/Mo(MoN)$(t{\AA})/NiFe(21{\AA})/CoFe(28{\AA})/Cu(22{\AA})/CoFe(18{\AA})/IrMn(65{\AA})/Ta(25 {\AA})$. Mo and MoN films were deposited on Si substrates and their thermal annealing behavior was analyzed. The deposition rate of the MoN thin film was decreased and tile resistivity of the MoN thin films were increased as the $N_2$ gas flow was increased. The variations of MR ratio and magnetic exchange coupling field of spin valve structure were smaller with MoN underlayers than that with Mo underlayers up to thickness of $51{\AA}$. MR ratio of spin valves with Mo underlayers was 2.86% at room temperature and increased up to 2.91 % after annealing at $200^{\circ}C$. Upon annealing at $300^{\circ}C$, the MR ratio decreased about 2.16%. The MR ratio of spin valves structure with MoN underlayers for $N_2$ gas flow 1 sccm was 5.27% at room temperature and increased up to 5.56% after annealing at $200^{\circ}C$. Upon annealing at $300^{\circ}C$, the MR ratio decreased about 4.9%.