• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.2
• /
• pp.119-143
• /
• 2011

This study identifies the characteristics of recent citation-based indicators for assessing a single paper in the context of their co-relationships. Five predefined indicators were examined with three variants of h-index which are convened in this study; the formers are PageRank, SCEAS Rank, CCI, f-value, and single paper h-index and the latters are $h_S$-index, h1-index, and $h_S$1-index. The correlation analysis and cluster analysis were performed to group the indicators by common characteristics, after which the indicators were calculated with the dataset from KSCI DB. The results show statistical evidence that distinguishes h-index type indicators from others. The characteristics of the indicators were verified with citation frequency factors using correlation analysis. Finally, the implications for applications and further studies are discussed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.109-117
• /
• 1999

In this paper, improved lamp type ownizer( ILO ), which utilizes the superposition of lamp type ownizer( LO ) and surface discharge operation, is designoo and manufactured for the purpose of characteristic improverrent of an LO employoo for installation of environrrent improverrent and good health using Ultraviolet(U.V.) photochemical reactions Irethoc1s. The ownizer consists of 2 types( LO and ILO ), and owne concentration, owne generation and owne yield were investigated in accordance with discharge power and quantity of suwlioo gas. The results of owne concentration, owne generation and owne yield were ILO > LO. So, owne generation characteristics of the lamp type ownizer were improved. At a discharge power of 19[W], owne concentration, owne generation, and owne yield of the ILO are each improvoo than LO 124[%] at the gas flow $1[\ell/min]$ and 143[%] at the gas flow $1[\ell/min]$. The maximum values of owne concentration, owne generation and owne yield were found as 712[ppm], 128[mg/h] and 6750[mg/kWh] respectively.tively.

• Applied Biological Chemistry
• /
• v.27 no.2
• /
• pp.112-118
• /
• 1984

Inverase was entrapped in calcium alginate gel. The immobilized beads had excellent uniform size and configuration. To screen the optimal conditions possessing high enzyme activity, effects of sodium alginate concentration, $CaCl_2$ concentration, and the incubation time of beads in $CaCl_2$ solution during the immobilization procedure were investigated. Immobilized beads prepared from the optimal conditions had 18.8 units per ml of gel, which is equivalent to 68% of the activity of soluble enzyme. Several kinetic parameters were determined: Km value. 143 mM; optimum pH, 4.5; optimum temperature, $50^{\circ}C$. Enzyme loading capacity was 150 mg per 20 ml gel. No significant decrease in sugar conversion was observed during the column operation for 6 days.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.143-149
• /
• 2020

Calcium phosphates recognized as important bio-materials have been successfully synthesized by simple precipitation using waste abalone shells, which are rich mineral sources of calcium. Calcium hydroxide (Ca(OH)₂) originated from abalone shells was used as calcium source (precursor) for the preparation. Synthesis of calcium phosphates was performed by reacting calcium hydroxide with phosphoric acid (H₃PO₄) in aqueous solution. The initial precursor Ca/P ratios were adjusted to 1.50, 1.59 and 1.67, and the effect of the composition and the heat treatment on the synthesized powders and sintered bodies was investigated. The phases of the sintered ceramics prepared at 1150℃ were hydroxyapatite (HAp), β-tricalcium phosphate (β-TCP), and biphasic phosphate (HAp with β-TCP)), which were determined by the initial precursor Ca/P ratios. The results demonstrate the possibility for the synthesis of high value-added calcium phosphates from economical starting materials with low cost and high availability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.143-147
• /
• 2013

The feasibility of incorporating black sesame powder (BSP) as a value-added food ingredient in convenient food products, using a model system of yanggaeng, was investigated. BSP was incorporated into yanggaeng at 0, 3, 6, 9, and 12% (w/w) weight amounts based on the total weight of cooked white bean and BSP. pH increased significantly with increasing levels of BSP added (p<0.05). In terms of color, lightness and yellowness decreased significantly but redness increased (p<0.05) with increasing levels of BSP. Hardness also increased significantly with higher amounts of BSP in the formulation (p<0.05). Total polyphenol content and 1,1-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity significantly increased as the BSP concentration increased in the formulation (p<0.05). Finally, the consumer acceptance test indicated that the highest levels of BSP incorporation (12%, w/w) had a considerable adverse effect on consumer preferences in all attributes. In contrast, yanggaengs with moderate levels of BSP (6%, w/w) are recommended (based on overall preference score) for taking advantage of the functional properties of BSP without sacrificing consumer acceptability.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.12C no.4
• /
• pp.201-207
• /
• 2002

A Pin-Cylinder discharge type ozonizer was designed and manufactured. The increase or decrease of temperature greatly influences on the characteristics of ozone generation of a discharge type ozonizer. The characteristics of ozone concentration ( $O_{3con}$), ozone generation ($_{3g}$) and ozone yield .ate ($_{3Y}$) of the ozonizer were investigated by varying the gas flow rate (Q), the discharge power ($_{Wd}$ ) and the temperature (T). At T = 20($^{\circ}C$), the values of ( $O_{3con}$) were found as 7800,5300,3000 and 2300(ppm) at Q=1,2,4 and 6(1/min) respectively. The corresponding values of ( $O_{3g}$) were found as 917, l247,1411 and 1623(mg/h) and those of ( $O_{3Y}$) were 93,126,143 and 164(g/kWh) respectively. When the temperature is decreased to -50($^{\circ}C$), the values of ( $O_{3con}$) became 12000,8000,5200 and 3600(ppm) at Q=1,2,4 and 6(1/min) respectively. The corresponding values of 0,9 were obtained as 1411,1882,2446 and 2600(mg/h) and those of ($O_{3Y}$) were 143,190,247 and 2631g/kWh] respectively. Hence as the temperature was decreased from 20 to -50[。C], the efficiencies of ozone generation were increased by 54,51,73 and 60[%] at Q=1,2,4 and 6(1/min) respectively.ctively.

• Korean Journal of Plant Taxonomy
• /
• v.45 no.1
• /
• pp.29-35
• /
• 2015

Sasa borealis (Hack.) Makino & Shibata is widely distributed in South Korea. With amplified fragment length polymorphism (AFLP) markers, we analyzed the genetic diversity of S. borealis to predict and measure the phytogeographical factors of these populations. Relatively high levels of genetic diversity (PPL = 37.2%, h = 0.143, I = 0.205) and genetic differentiation ($G_{ST}$ = 0.324, ${\theta}^B$ = 0.395) were confirmed in populations of S. borealis. Moreover, an analysis of molecular variance (AMOVA) showed that the rate of differentiation among the populations was 47.7%. The results showed that genetic diversity is inversely proportional to the latitude of the S. borealis populations, indicating that the distribution of S. borealis may have extended from lower to higher latitudes. This method of investigating the correlation between genetic diversity and latitude presents critical information for estimating changes in distributions and plant conservation due to climate change.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.696-701
• /
• 2002

Optimal conditions for preparing of chitooligosaccharides from chitosan with cellulase was researched by response surface methodo-logy, Penicillium funiculosum derived cellulase was most effective for chitooligosaccharides production as the point of hydrolyzing activity and commercial utility. The result which measures the change of degrading ratio at time course, 10 hr reaction showed a exponential increase and after that time degrading ratio was not changed. The optimal conditions determined by response surface methodology with central composite design of total 26 species were $0.5\%$ of chitosan, 143 U enzyme, 49$^{\circ}C$ of reaction temperature, 13.2 hr of reaction time and pH 3.8. Major chitooligosaccharides produced from chitiosan on optimal conditions were dimer and trimer.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.143-151
• /
• 2014

This paper describes external and internal stability of reinforced earth wall using large-scale modular block and geogrid reinforcement. The evaluation for external and internal stability was conducted to analyze effect of wall height, reinforced soil (or backfill soils) and reinforcement strength. The external stability showed that the analysis cases were satisfied with design criteria, when the required minimum length and vertical spacing of reinforcement were 0.7H and 1m, respectively. The internal stability conformed that some cases were satisfied with design criteria in $25^{\circ}$ of internal friction angle of reinforced soil. Expecially, it will be applicable as wall structure considering a structural stability and economic efficiency based on evaluation of internal stability.

• Journal of Broadcast Engineering
• /
• v.26 no.2
• /
• pp.143-154
• /
• 2021

In this paper, we propose a method of compressing digital hologram standardized data provided by JPEG Pleno. In numerical reconstruction of digital holograms, the addition of random phases for visualization reduces speckle noise due to interference and doubles the compression efficiency of holograms. Holograms are composed of completely complex floating point data, and due to ultra-high resolution and speckle noise, it is essential to develop a compression technology tailored to the characteristics of the hologram. First, frequency characteristics of hologram data are analyzed using various wavelet filters to analyze energy concentration according to filter types. Second, we introduce the subband selection algorithm using energy concentration. Finally, the JPEG2000, SPIHT, H.264 results using the Daubechies 9/7 wavelet filter of JPEG2000 and the proposed method are used to compress and restore, and the efficiency is analyzed through quantitative quality evaluation compared to the compression rate.