• 천문학회지
• /
• 제29권spc1호
• /
• pp.323-324
• /
• 1996

In the present work we introduce a new flare activity indicator, MAD and examine its characteristics by analyzing a set of successive three days' observations of a typical active region, AR2372. The computed MAD is compared with conventional activity indicator such as separator. It is found that. (1) MAD traces very well the separator, (2) it. singles out. local discontinuity of magnetic field lines and (3) it. is a good measure of describing the evolutionary status of active region.

• 천문학회보
• /
• 제36권2호
• /
• pp.51.1-51.1
• /
• 2011

We introduce new methods to measure distance in precision using large scale structure formation. The accuracy to determine geometrical factors is enhanced in comparison to the previous method known as BAO. We determine both D_A and H simultaneously as well as structure of growth of density fluctuations and peculiar velocities. Our method is independent of any given prior on large scale structure formation such as the shape of spectra.

• 대기
• /
• 제29권2호
• /
• pp.197-211
• /
• 2019

The observational sensitivity of dual-polarization weather radar was quantitatively analyzed by using two different pulse widths. For this purpose, test radar scan strategy which consisted of consecutive radar scan using long (LP: $2{\mu}s$) and short (SP: $1{\mu}s$) pulses at the same elevation angle was employed. The test scan strategy was conducted at three operational S-band dual-polarization radars (KSN, JNI, and GSN) of Korea Meteorological Administration (KMA). First, the minimum detectable reflectivity (MDR) was analyzed as a function of range using large data set of reflectivity ($Z_H$) obtained from JNI and GSN radars. The MDR of LP was as much as 7~22 dB smaller than that of SP. The LP could measure $Z_H$ greater than 0 dBZ within the maximum observational range of 240 km. Secondly, polarimetric observations and the spatial extent of radar echo between two pulses were compared. The cross-polar correlation coefficient (${\rho}_{hv}$) from LP was greater than that from SP at weak reflectivity (0~20 dBZ). The ratio of $Z_H$ (> 0 dBZ) and ${\rho}_{hv}$(> 0.95) bin to total bin calculated from LP were greater than those from SP (maximum 7.1% and 13.2%). Thirdly, the frequency of $Z_H$ (FOR) during three precipitation events was analyzed. The FOR of LP was greater than that of SP, and the difference in FOR between them increased with increasing range. We conclude that the use of LP can enhance the sensitivity of polarimetric observations and is more suitable for detecting weak echoes.

• Journal of applied mathematics & informatics
• /
• 제14권1_2호
• /
• pp.97-113
• /
• 2004

In this paper we shall study moving boundary problems, and we introduce an approach for solving a wide range of them by using calculus of variations and optimization. First, we transform the problem equivalently into an optimal control problem by defining an objective function and artificial control functions. By using measure theory, the new problem is modified into one consisting of the minimization of a linear functional over a set of Radon measures; then we obtain an optimal measure which is then approximated by a finite combination of atomic measures and the problem converted to an infinite-dimensional linear programming. We approximate the infinite linear programming to a finite-dimensional linear programming. Then by using the solution of the latter problem we obtain an approximate solution for moving boundary function on specific time. Furthermore, we show the path of moving boundary from initial state to final state.

• Journal of Biosystems Engineering
• /
• 제34권1호
• /
• pp.21-29
• /
• 2009

A rapeseed reaping equipment attachable to a conventional combine was developed in order to harvest rapeseed for bio-diesel materials. This study was carried out to measure the harvest feasibility of a prototype combine in rapeseed fields. Grain, stem and pod flow rate, grain qualities (whole kernel, damaged kernel, unhulled kernel, material-other-than-grain) and grain loss rates (header, threshing, separation) were investigated in each field test. As the result of the fold test, the average grain flow rates of SUNMANG and MS varieties showed 1,430 kg/h and 2,038 kg/h, respectively. The average stem and pod flow rates showed 3,443 kg/h and 6,596 kg/h, respectively. In each working speed, the average whole kernel rate and the material-other-than-grain showed 99.9% and below 0.08%, respectively. In the average grain loss, the rates showed 5.66% in case of SUNMANG and 5.94% in MS. Header loss was higher than other parts for SUNMANG. However, threshing loss was relatively higher than other parts for MS. Header loss rate due to side cutter knifes, however, was not so high when compared with a grain loss due to the cutter bar. Effective field capacity and field efficiency of the prototype combine showed 0.389 ha/h and 44%, respectively. Comparison of customary combine with the prototype combine through field test demonstrated that the header loss was reduced by 69.3% when the prototype combine was used.

• 공업화학
• /
• 제33권3호
• /
• pp.302-308
• /
• 2022

사격장 피탄지에 잔류되는 고폭화약으로 인한 환경오염 문제를 해결하기 위해 표면적이 큰 나노입자를 사용한 분해반응을 연구하였다. 수질오염을 가상하여 물에 용해시킨 research department explosive (RDX)와 high melting explosive(HMX) 니트라민 폭발물에 PdO를 첨가하여 313 K에서 분해반응시켰다. 폭발물의 분해반응속도를 측정하기 위해 반응 초기부터 종료시까지 시료 손실없이 반응속도를 측정할 수 있고 스펙트럼을 통하여 반응의 진행 정도를 관찰 가능한 ¹H NMR을 사용하였다. NMR 피크의 chemical shift 및 peak intensity 분석으로 유사 1차 분해반응이 일어남을 확인하였으며, 측정된 RDX와 HMX의 분해반응 속도상수는 각각 2.10 × 10^-2과 6.35 × 10^-4 h^-1이었다. 본 연구로부터 산화금속 PdO 나노입자는 니트라민 폭발물 분해반응연구에 적용 가능함을 확인하였다.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.345-352
• /
• 2017

본 논문에서는 전원전압 1V에서 동작하는 산소 및 과산화수소 기반의 혈당전류를 측정할 수 있는 통합형 정전압분극장치를 설계하고 제작하였다. 정전압분극장치는 저전압 OTA, 캐스코드 전류거울 그리고 모드 선택회로로 구성되어 있다. 정전압분극장치는 산소 및 과산화수소 기반에서 혈당의 화학반응으로 발생하는 전류를 측정할 수 있다. OTA의 PMOS 차동 입력단의 바디에는 순방향전압을 인가하여 문턱전압을 낮추어 낮은 전원전압이 가능하도록 하였다. 또한 채널길이변조효과로 인한 전류의 오차를 줄이기 위해 캐스코드 전류거울이 사용되었다. 제안한 저전압 정전압분극장치는 Cadence SPECTRE를 이용하여 설계하였으며, 매그나칩 $0.18{\mu}m$ CMOS 공정을 이용하여 제작되었으며 회로의 크기는 $110{\mu}m{\times}60{\mu}m$이다. 전원전압 1.0V에서 소모전류는 최대 $46{\mu}A$이다. 페리시안화칼륨($K_3Fe(CN)_6$)을 사용하여 제작된 정전압분극장치의 성능을 확인하였다.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제6권2호
• /
• pp.1-9
• /
• 1968

In mathematics, a definition must have authentic reasons to be defined so. On defining geometric figures, there must be adequencies in sequel and consistency in the concepts of figures, though the dimensions of them are different. So we can avoid complicated thoughts from the study of geometric property. From the texts of SMSG, UICSM and others, we can find easily that the same concepts are not kept up on defining some figures such as ray and segment on a line, angle and polygon on a plane, and polyhedral angle and polyhedron on a 3-dimensionl space. And the measure of angle is not well-defined on basis of measure theory. Moreover, the concepts for interior, exterior, and frontier of each figure used in these texts are different from those of general topology and algebraic topology. To avoid such absurdness, I myself made new terms and their definitions, such as 'gan' instead of angle, 'polygonal region' instead of polygon, and 'polyhedral solid' instead of polyhedron, where each new figure contains its interior. The scope of this work is hmited to the fundamental idea, and it merely has dealt with on the concepts of measure, dimension, and topological property. In this case, the measure of a figure is a set function of it, so the concepts of measure is coincided with that of measure theory, and we can deduce the topological property for it from abstract stage. It also presents appropriate concepts required in much clearer fashion than traditional method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.184-187
• /
• 2006

The heat transfer characteristics of solar tower receivers are experimentally investigated with receiver shapes. Generally the heat transfer characteristics become different according to the shapes and materials of the volumetric air receiver. In order to study these effects, The experimental apparatus adopting laminated mesh and honeycombs as the volumetric air receiver is proposed. The receiver consists of laminated mesh (diameter; 100mm, thickness; 1mm), honeycombs (diameter; 100mm, thickness; 30 mm) inserted out the heat transfer characteristics of the laminated mesh the air temperatures are obtained by installing 3 thermocouples on each layer, dividing ceramic tube into 4 layers. Also, a radiative shield is installed to measure the only air temperature. The data for laminated mesh and honeycomb thickness of 30, 60, 90mm are obtained. The results show that the temperature of layer 3 is higher than those of layer 2 and layer 1.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2959-2962
• /
• 2013

As the concentration of aqueous $CD_3OH$ solutions was decreased, the OD peaks in $^2H$ NMR spectra grew relative to the $CD_3$ peaks. Isotope impurity for OH groups of $CD_3OH$ and deuterium naturally present in water contributed to the OD peaks. Using these peak area data, the site-specific isotope populations of isotope enriched chemicals were measured. In addition, the method using both $^1H$ and $^2H$ NMR spectroscopy was demonstrated with neat $CD_3OH$ to measure the site-specific isotope populations. The results indicate that although it represents only ~0.015% of hydrogen isotopes, the deuterium naturally present in solvents cannot be ignored, especially when the concentration of deuterium-enriched solutes is varied. Proton/deuteron exchange between methyl and methyl/hydroxyl groups was confirmed to be negligible, while that among hydroxyl groups was detectable.