• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.89-95
• /
• 2003

This research analyzes the cutting mechanism of A1100-H18 of commercially pure aluminum by image processing in SEM(Scanning Electron Microscope) for the measurement of strain rate distribution near a cutting edge in orthogonal micro-cutting. The distribution is measured using various methods in order. The methods are in-situ observations of cutting process in SEM, inputting image data, a computer image processing, calculating displacements by SSDA(Sequential Similarity Detection Algorithm) and calculating strain rates by FEM. The min results obtained are as follows: (1)It enables to measure a microscopic displacement near a cutting edge. (2) An application of this system to cutting process of various materials will help to make cutting mechanism clear.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.173-176
• /
• 1995

We have developed a fast steady state free precession interferometry (SSFPI) technique which is useful for the fMRI (functional Magnetic Resonance Imaging). As is known, SSFP sequence with a suitable adjustment of gradient (readout) allows us to measure precession angle $\theta$ which is in turn related to the field inhomogeneity [1-3]. When the method is applied to the susceptibility effect based functional magnetic resonance imaging (fMRI), it was found that the direct susceptibility effect measurement was possible without perturbations such as the backgrounds and inflow effect. In this paper, simulation results and experimental results obtained with 2.0 Tesla MRI system are also presented.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.144-149
• /
• 2008

This study presents the selection of cutting conditions in high speed pipe cutting machine for the better quality. A high speed pipe cutting machine which uses a rotary knife can make good quality products in short time. But, the machine is much sensitive by cutting conditions because of the complicated mechanism. In this reason, many experiments for cutting condition selection are necessary to improve quality of production. This study carried out cutting experiments with the three factors that are cutting RPM, cutting force and pooling force. 2-dimensional profile measuring instrument is used to measure which is represented by ${\Delta}h$, a sum of burr and collapse height. The effects of factors are analyzed by using MINITAB, the commercial software.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.22-27
• /
• 2005

We have studied the standardization of critical temperature measurements by using an ac susceptometer. Wire forms of NbTi, $Nb_{3}Sn$, and Bi-2223 superconductors were prepared to measure the temperature dependences of the magnetization. In order to study the optimum ac magnetic field and frequency, various amplitudes from 2 Oe to 10 Oe with frequencies from 11.3 Hz to 1033 Hz were applied to three specimens. Analytical comparison of the magnetic curves with the resistive curves was accomplished to investigate validity of using the new method.

• Journal of fish pathology
• /
• v.19 no.2
• /
• pp.183-188
• /
• 2006

In fish vaccinology, the secondary antibodies against fish immunoglobulins (Igs) are necessary to measure specific humoral immune responses in immunized fish. In the present study, polyclonal antiserum against olive flounder (Paralichthys olivaceus) IgM heavy chain was generated by intramuscular immunization of rabbit with Escherichia coli/eukaryotic shuttle vector containing open reading frame (ORF) of olive flounder IgM heavy chain. Western blot analysis demonstrated the specific activity of the rabbit antiserum with reduced olive flounder serum H chain at dilutions up to 1:1000. Titer of immunized rabbit serum against olive flounder serum was significantly higher than that of pre-immunized rabbit serum when determined by ELISA.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.6
• /
• pp.753-760
• /
• 1999

Experiments were conducted to investigate the effect of the initial turbulent intensity on the flow and heat transfer characteristics for a two-dimensional impinging jet. A square rod was installed at the nozzle exit to increase initial turbulent intensity. A hot wire probe and thermochromic liquid crystal technique were used to measure the turbulent intensity and the surface temperature. All measurements were made over a range of nozzle-to-plate distance from 1 to 10 at Re=20,000. When the rod is not installed, the maximum stagnation point Nusselt number is occurred at H/B=9. A higher initial turbulent intensity enhanced the heat transfer on the surface. A correlation between stagnation point Nusselt number and turbulent intensity are presented.

• Journal of the Korean Society of Combustion
• /
• v.8 no.3
• /
• pp.8-14
• /
• 2003

In order to investigate the effect of fuel mixing on PAH and soot formation, four species of methane, ethane, propane and propene have been mixed in counterlfow ethylene diffusion flame. Laser-induced incandescene and laser-induced fluorescene techniques were employed to measure soot volume fraction and polycyclic aromatic hydrocarbon (PAH) concentration, respectively. Results showed that the mixing of ethane (or propane) in ethylene diffusion flame produces more PAHs and soot than those of propene. Considering that propene directly dehydrogenates to propargyl radical, this behavior implied that the enhancement of PAH and soot formation by the fuel mixing of ethylene and ethane (or propane) cannot be explained solely by propargyl radical directly dehydrogenated from ethane (or propane). Thus, combination reactions between C1 and C2-species for the formation of propargyl was suggested to identify the synergistic effect occurring in the flames of ethylene and propane (or ethane) mixtures.

• The Journal of Korean Physical Therapy
• /
• v.15 no.1
• /
• pp.196-209
• /
• 2003

The aim of study was compared with the possible role of cranial artery in headache pathogenesis each 2 group (group I : ultrasound therapy alone, group II : myofascial release therapy alone)- divided each 5 tension- type headache patients. Each group were applied ultrasound therapy for 5 minuets and myofascial release therapy for 15 minuets in occipital portion. The study carried out to determine the effects of ultrasound and myofascial release on the cranial arteries velocity from November 11, 2001 to March 29, 2002 the objects were 10 patients who having the tension-type headache at H-hospital. Transcranial doppler ultrasonograpy(TCD) is new non-invasive applicable method to evaluate flow velocities of intrans cranial and extracranial cerebral arteries. TCD was peformed with standard method to measure the Mean Flow Velocity(MFV) of the middle and posterior cerebral arteries, the vertebral arteries.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.11
• /
• pp.1424-1431
• /
• 2004

With traditional experimental methods such as the secondary fluid (e.g., water) calorimetric method, it is very difficult to accurately test the local condensation heat transfer inside mini-channels. Hence, there are large discrepancies between the results of previous studies. The experimental methods as well as unidentified sources of uncertainties could be reasons for such discrepancies. In this study, innovative experimental techniques were developed to measure the in-tube condensation heat transfer coefficient. With these techniques, very low heat dissipation rates such as several watts from the mini-channel could be estimated and low mass flow rates below the 0.1 ㎏/h could be measured with reasonable uncertainties. To the authors' knowledge, these techniques provide a unique experimental apparatus for measuring the condensation heat transfer coefficients inside the sub-millimeter hydraulic diameter single channels.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.58.3-59
• /
• 2018

We investigate velocity oscillations in a solar quiet region by using the spectral data of the $H{\alpha}$ and Ca II $8542{\AA}$ lines. The data were acquired by the Fast Imaging Solar Spectrograph installed at the 1.6 m Goode Solar Telescope of Big Bear Solar Observatory. According to Chae & Litvinenko (2018)'s theoretical work, there is a correlation between dominant period of the oscillations and the temperature of the temperature minimum region in a non-isothermal atmosphere. In our study, we measure the temporal variations of the intensity and the line of sight Doppler velocity, and find out the relations between the intensity and dominant period of the oscillations. In addition, we investigate oscillations in a few distinct regions and discuss regional characteristics of the oscillations.