• 에너지공학
• /
• 제7권1호
• /
• pp.7-16
• /
• 1998

분류층 석탄 가스화기에서 5 종류(Lewis-Stockton, Utah, Illinois #6 등의 역청탄, Usibelli 아역청탄, Beulah-Zap갈탄)의 석탄을 가스화시킬 때 산소/석탄과 수증기/석탄 비의 변화가 반응성 흐름에 미치는 영향을 평가하기 위한 전산모사를 수행하였다. 산소/석탄의 비(kg/kg)를 0.7에서 1.4로, 수증기/석탄의 비(kg/kg)를 0.0에서 0.4로 각각 변화시키면서 생성가스인 CO와 H2의 농도 변화를 계산하였다. 또한 Roto탄을 가스화하였을 때 가스화기 출구에서의 CO와 H2의 실험값과 전산모사 예측값을 서로 비교·분석하여 모사결과의 타당성을 입증하였다. 모사결과 탄종에 관계없이 산소/석탄의 비가 증가함에 따라 CO와 H2의 생성량을 증가한 후 감소하였으며, 수증기/석탄의 비가 증가함에 따라 CO의 생성량은 감소하였으나 수소의 생성량은 어느 정도까지는 증가하였다. 산소/석탄의 비가 1.0∼1.2이고 수증기/석탄의 비가 0.3∼0.4인 범위내에서 냉가스 효율이 높게 예측되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.726-731
• /
• 2001

A thermal design software is developed for the heat recovery steam generator(HRSG) of combined cogeneration systems. The heat transfer is calculated by using the element method to account for the varying thermal properties across the heat transfer elements. The circulation balance is computed for the evaporator to accurately estimate the steam generation rate and to check the proper circulation of the boiler water through the tubes. The software developed can be used to simulate HRSG systems with various combinations of auxiliary burner, wall superheater, superheater, reheater, evaporator, and economizer. Systems with several different combinations of the system components are successfully tested. And it is concluded that the developed software can be used for the design of heat recovery steam generators with various combinations of heat transfer components.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.57-62
• /
• 2001

Korea Atomic Energy Research Institute (KAERI) launched an intermediate scale steam explosion experiment named Test for Real cOrium Interaction with water (TROI) using reactor material to investigate whether the corium would lead to energetic steam explosion when interacted with cold water at low pressure. The melt-water interaction is confined in a pressure vessel with the multi-dimensional fuel and water pool geometry. The cold crucible technology, where the mixture of powder in a water-cooled cage is heated by high frequency induction, is employed. In this paper, results of the first series of tests ($TROI-1{\sim}5$) were discussed. The ZrO2 jets with 5kg mass and 5cm diameter were poured into the 67cm deep water pool at $30{\sim}95^{\circ}C$. Either spontaneous steam explosions or quenching was observed. The morphology of debris and pressure wave profiles clearly indicates the each case.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.74-79
• /
• 2009

The generation of electric power and plant facilities have been attempting to improve energy efficiency with many efforts as those being basis of our country's economy. In particular, the CHP(Combined Heat Power plant) system, is producing the electricity and process steam, has generally been using for the cogeneration plants. When CHP system operates, the steam has to maintain the high temperature and high pressure in order to have high efficiency of electric power production as much as possible. In addition, the exhausted steam from the turbine has to reform proper temperature to use the needed process. The major purpose of desuperheater is that the superheated steam changes into the saturated steam because it is more efficient and suitable for using the process, furthermore, it is more convenient and stable regarding the process temperature control. The design of the desuperheater obtained through the experiment and preceding analysis. This paper is verified by analysis that water spray nozzle(${\Phi}$=28mm) shows the best ability under the real power plant condition.

• 한국수소및신에너지학회논문집
• /
• 제29권3호
• /
• pp.235-242
• /
• 2018

Hydrogen can be produced by reforming reaction of natural gas (NG) and biogas, or by water electrolysis. In this study, hydrogen production through water-electrolysis needs superheated steam above $700^{\circ}C$ for high efficiency. The production method of hydrogen like this was recommended for the 4-type processes for superheated steam ($700^{\circ}C$, 3 atm) by Bio-SRF combustion furnace. The 4-type processes to produce superheated steam at $700^{\circ}C$ from the heat source of SRF combustion furnace was simulated using PRO II. The optimum process was selected through exergy analysis. The difference of process 1 and 2 is to the order of depressure and heating process to change $180^{\circ}C$ and 7 atm to $700^{\circ}C$ and 3 atm. Process 3 and 4 is to utilize 25% of steam to generate superheated steam and remaining to use for the power generation by steam generator.

• 한국식품영양과학회지
• /
• 제44권3호
• /
• pp.412-417
• /
• 2015

증포 처리가 삼채 뿌리의 품질 특성 및 항산화 활성에 미치는 영향을 조사하였다. 증포 처리한 삼채 뿌리는 생 삼채 뿌리보다 황 함량이 각각 2.0배와 2.1배 감소하였다. pH와 총당은 증포 처리에 의해 감소하였으나 적정산도와 갈변도는 증가하였다. 색도의 경우 L과 b 값은 감소하였으나 a 값은 증가하였다. 열수 추출물의 항산화 활성은 증포 4회가 DPPH radical assay, ABTS radical assay 및 reducing power에서 $EC_{50}$ 값이 각각 0.44 mg/mL, 9.01 mg/mL 및 0.48 mg/mL로 가장 낮게 나타났으나 TPC($34.47{\mu}g/mg$)와 갈변도(2.05 at 280 nm와 0.20 at 420 nm)는 가장 높게 나타났다. 이들 성분과 각 항산화 활성에 대한 $EC_{50}$ 값의 $R^2$는 0.87 이상의 높은 값을 나타내었다. 결과적으로 증포 처리는 삼채 뿌리의 항산화 활성을 증가시키는 데 효과적인 가공 방법으로 판단된다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제44권1호
• /
• pp.21-27
• /
• 2022

Different parts of the mulberry plant are described to be potential sources of polyphenolics exhibiting strong antioxidant activity. In this study, we prepared various aqueous extracts of mulberry root bark by subjecting to steam at different temperatures and time intervals (45℃, 15 h; 70℃, 15 h; 95℃, 6 h and 95℃, 15 h) followed by extracting at 80℃ for 1 h. The total polyphenolic content ranged from 66.82-101.20 mg gallic acid equivalent (GE)/g of extract whereas the flavonoids were in the range of 13.03-25.23 mg catechin equivalent (CE)/g of extract. The extracts also exhibited strong antioxidant activities (0.99-1.66 mg trolox equivalent (TE)/g of extract in DDPH assay and 10.65-16.26 mg TE/g of extract in ABTS assay). This study clearly showed an improvement in the antioxidant activity of the water extract of mulberry root bark by the steam treatment, which can be used as a tea or health-promoting materials.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.11-20
• /
• 2001

Super-critical type steam power plant, which operates with steam pressure above the super-critical point, has a good reputation recently and is adopted as a new standard of the Korean Electric Power Corporation. The reason for the good reputation lies in it's superior power efficiency. However, the field data of the new power plant for the verification of it's performance are still insufficient, and more empirical data are needed to acquire technologies on the effective operation of it. In this study, the authors analyzed the field test data on power efficiencies got in a super-critical type steam power plant, and evaluated the excellency of the new plant by comparing the efficiency data with the one got in a conventional sub-critical type steam power plant.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2753-2760
• /
• 2021

This paper proposes using sodium-cooled fast reactor technologies for use in hydrogen vapor methane (SMR) modification. Using three independent energy rings in the Russian BN-600 fast reactor, steam is generated in one of the steam-generating cycles with a pressure of 13.1 MPa and a temperature of 505 ℃. The reactor's second energy cycles can increase the gas-steam mixture's temperature to the required amount for efficient correction. The 620 ton/hr 540 ℃ steam generated in this cycle is sufficient to supply a high-temperature synthesis current source (700 ℃), which raises the steam-gas mixture's temperature in the reactor. The proposed technology provides a high rate of hydrogen production (approximately 144.5 ton/hr of standard H₂), also up to 25% of the original natural gas, in line with existing SMR technology for preparing and heating steam and gas mixtures will be saved. Also, exergy analysis results show that the plant's efficiency reaches 78.5% using HTR heat for combined hydrogen and power generation.

• 한국가스학회지
• /
• 제20권6호
• /
• pp.95-101
• /
• 2016

본 연구에서는 다양한 수소 생산 방법 중 하나인 천연가스 수증기 개질반응(natural gas steam reforming reaction)에 대해 일반적인 충전층반응기와 반응기와 수소분리기가 결합된 새로운 형태의 분리막 반응기에서의 성능에 대한 비교분석을 수행하였다. Xu 와 Froment에 의해 기존에 발표된 실험결과를 바탕으로 상업용 화학공정모사기인 Aspen $HYSYS^{(R)}$ 모델이 개발되었으며, 반응온도, $H_2$ 투과량, Ar 유량 등이 분리막 반응기에서의 반응물의 전환율 및 $H_2$ 수율 향상도에 미치는 영향에 대해 분석한 결과 분리막 반응기에서 보다 많은 양의 수소수율 및 메탄전환율이 확인되었다. 더 나아가, 전체 시스템에서 필요로 하는 열량을 공급하기 위해 요구되는 천연가스의 양에 초점을 맞춰 분리막 반응기에서의 원가절감 가능성을 평가한 결과, 분리막 반응기에서 10.94%의 원가절감이 관찰되었다.