• Journal of Biosystems Engineering
• /
• 제29권3호
• /
• pp.243-250
• /
• 2004

본 연구에서는 국내 미곡도정공장의 도정기계 작동상태와 가공된 발 품질의 원격감시를 위해서 인터넷기반 감시시스템을 개발하고자 하였다. 인터넷 감시시스템은 Laboratory Virtual Instrument Engineering Workbench(Lab VIEW)를 이용하여 개발되었으며 Hypertext Transfer Protocol(HTTP)을 제공할 수 있는 중앙서버, 현장제어용 Programmable logic controller (PLC) 및 각종 센서 등으로 구성되었다. 비상상태를 대비하기 위하여 도정기계를 원격으로 제어(ON/OFF)할 수 있도록 제어알고리즘을 설계하였다. 개발된 인터넷기반 감시시스템은 미곡 도정공장에 설치한 모든 도정기계의 작동상태, 백미 탱크내의 백미 무게와 백미의 온도 및 평형상대습도를 실시간으로 감시할 수 있었으며, 원격으로 측정한 백미탱크내의 평형온도 및 평형상대습도를 이용하여 백미의 함수율도 예측할 수 있었다. 거리 및 인터넷속도에 의해 발생된 시간지연의 측정과 원격으로 수집된 자료의 검증을 통해 인터넷 감시시스템의 성능을 평가하였다. 인터넷상의 시간지연(서울-광주간)은 약 1.2$\pm$0.2s 이었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권2호
• /
• pp.195-203
• /
• 2016

In order to overcome the influence of system stability and accuracy caused by uncertainty, estimation errors and external disturbances in Eight-Rotor MAV, L2 gain control method was proposed based on interval type II fuzzy neural network identification here. In this control strategy, interval type II fuzzy neural network is used to estimate the uncertainty and non-linearity factor of the dynamic system, the adaptive variable structure controller is applied to compensate the estimation errors of interval type II fuzzy neural network, and at last, L2 gain control method is employed to suppress the effect produced by external disturbance on system, which is expected to possess robustness for the uncertainty and non-linearity. Finally, the validity of the L2 gain control method based on interval type II fuzzy neural network identifier applied to the Eight-Rotor MAV attitude system has been verified by three prototy experiments.

• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.729-739
• /
• 2006

This paper describes an active fault-tolerant control system for an induction motor drive that propels an Electrical Vehicle(EV) or a Hybrid one(HEV). The proposed system adaptively reorganizes itself in the event of sensor loss or sensor recovery to sustain the best control performance given the complement of remaining sensors. Moreover, the developed system takes into account the controller transition smoothness in terms of speed and torque transients. In this paper which is the sequel of (Diallo et al., 2004), we propose to introduce more advanced and intelligent control techniques to improve the global performance of the fault-tolerant drive for automotive applications(e.g. EVs or HEVs). In fact, two control techniques are chosen to illustrate the consistency of the proposed approach: sliding mode for encoder-based control; and fuzzy logics for sensorless control. Moreover, the system control reorganization is now managed by a fuzzy decision system to improve the transitions smoothness. Simulations tests, in terms of speed and torque responses, have been carried out on a 4-kW induction motor drive to evaluate the consistency and the performance of the proposed fault-tolerant control approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1612-1614
• /
• 1994

Modulators Installed in PLS(Pohang Light Source) Linac are composed of a DC high voltage section, a charging section and a discharging section. PFN is charged by a resonant charging mechanism, and discharged by a switching device through the primary of the pulse transformer connected to a load. Charged PFN voltage must be well regulated to obtain stable output pulse voltage at the load. For this purpose, DCHV is controlled by a SCR controller with feedback signal, and PFN voltage is regulated by a De-Q'ing circuit. The full power operation test shows the pulse voltage regulation within ${\pm}0.13%$ with SCR feedback control alone, and within ${\pm}0.08%$ together with De-Q'ing. This paper describes the design concept and operational characteristics of the De-Q'ing circuit.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2030-2036
• /
• 2016

This paper presents a hardware development procedure of the ASB(Active Seat Belt) control system to comply with ISO 26262. The ASIL(Automotive Safety Integrity Level) of an ASB system is determined through the HARA(Hazard Analysis and Risk Assessment) and the safety mechanism is applied to meet the reqired ASIL. The hardware architecture of the controller consists of a microcontroller, H-bridge circuits, passive components, and current sensors which are used for the input comparison. The required ASIL for the control systems is shown to be satisfied with the safety mechanism by calculation of the SPFM(Single Point Fault Metric) and the LFM(Latent Fault Metric) for the design circuits.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.83-89
• /
• 2008

This paper presents the dynamic analysis and input shaping control of a positioning stage. Vibration characteristics of the positioning stage are affected not only by the structural dynamics but also by the servo actuators that consist of the mechanism; driving motor and controller. This paper proposes an integrated dynamic model to accommodate both the structural dynamics and the servo actuators. Theoretical modal analysis with a commercial finite element code is carried out to investigate the dynamic characteristics of the experimental positioning stage. Experiments are performed to validate the theoretical modal analysis and estimate the equivalent stiffness due to the servo actuators. This paper deals with an input shaping scheme to suppress vibration of the positioning stage. Input shapers are systematically implemented for the positioning stage in consideration of its dynamics. The effects of servo control gain are also investigated. The experiments show that input shaping effectively removes residual vibrations and then improves the performance of positioning stage.

• 재활복지공학회논문지
• /
• 제4권1호
• /
• pp.23-28
• /
• 2010

심폐기능 허약자의 경우 다른 보행기능은 정상이지만 산소 공급에 문제가 발생된 경우로서, 에너지 소모를 최소한으로 줄여주는 보행보조 시스템이 필요하다. 심폐기능 허약자의 보행을 원활히 보조하기 위하여 본 연구에서는 고관절에 부착된 DC모터를 이용하여, 보행시 고관절 굴곡 및 신전을 제어하는 시스템을 고안하였다. 두 개의 모터를 좌우 고관절에 부착되어 정상 보행패턴을 기준으로 고관절의 굴곡과 신전의 설정각도를 정의하고 보행을 보조한다. 실험결과 보행보조에 의한 에너지 소모도 감소는 14.8%이었다.

• 천문학논총
• /
• 제21권2호
• /
• pp.81-86
• /
• 2006

Even though 30inch optical telescope at Kyung Hee Astronomy Observatory has been used to produce a series of scientific achievements since its first light in 1992, numerous difficulties in operating of the telescope have hindered the precise observations needed for further researches. Since the currently used PC-TCS(Personal Computer based Telescope Control System) software based on ISA-bus type is outdated, it doesn't have a user friendly interface and make it impossible to scale. Also accumulated errors which are generated by discordance from input and output signals into a motion controller required new control system. Thus we have improved the telescope control system by updating software and modifying mechanical parts. We applied a new BLDC(brushless DC) servo motor system to the mechanical parts of the telescope and developed a control software using Visual Basic6.0. As a result, we could achieve a high accuracy in controlling of the telescope and use the user friendly GUI(Graphic User Interface).

• 한국자기학회지
• /
• 제22권2호
• /
• pp.45-48
• /
• 2012

Co계 비정질 리본인 Metglass$^{(R)}$2714A 코어를 사용하여, 자기장 측정 범위가 ${\pm}100\;{\mu}T$, 측정 주파수 범위가 dc~10 Hz인 3-축의 피드백형 플럭스게이트 마그네토미터를 제작하였다. 제작된 마그네토미터의 아날로그 출력의 전기잡음은 5 pT/$\sqrt{Hz}$ at 1 Hz 이었으며, Micro-controller와 24 bit ADC(Analog to Digital Converter)를 사용한 마그네토미터의 출력을 0.1 nT의 분해능으로 디지털로 출력 할 수 있게 하였다. 디지털 신호로 출력되는 마그네토미터의 선형도는 $1{\times}10^{-4}$ 이하였으며, 1시간 동안 영점 변화는 0.2 nT 이하였다.

• 태양에너지
• /
• 제19권4호
• /
• pp.81-91
• /
• 1999

The work presented here is a design and development of sun tracking system for the parabolic dish concentrator. Parabolic dish concentrator is mounted on azimuth and elevation tracking mechanism, and controlled to track the sun with computed and measured sun positions. Sun tracking mechanism is composed of 1/30000 speed reducer(3 stages) and 400W AC servomotor for each axis. The nominal tracking speed of each axis is ${\pm}0.6^{\circ}/sec$ and the system has a driving range of $340^{\circ}$ in azimuth and of $135^{\circ}$ in elevation. Sun tracking control system consists of sun sensor, wind speed and direction measurement system, AC servomotor position control system and personal computer as a master controller. Sun sensor detects the sun located within ${\pm}50^{\circ}$ measured from the sun sensor normal direction. Computer computes the sun position, sunrise and sunset times and controls the orientation of parabolic dish concentrator through the AC servomotor position control system. It also makes a decision of whether the system should follow the sun or not based on the information collected from sun sensor and wind speed and direction measurement system. The sun tracking system developed in this work is implemented for the experimental work and shows a good sun tracking performance.